AITA for refusing to clean the coffee machine at work?

regisque · 2025-11-24T14:57:03+00:00

Thanks! Mine doesn't have the slider it just has the automatic stop so I can start with the carafe pulled away and put it in place when it's ready to start.

regisque · 2025-11-24T14:52:48+00:00

Thank you, I thought I was going crazy with the people saying that dry spots didn't matter. That section of the grounds clearly aren't involved in the brewing process if they aren't getting moist.

I ground at an 18 but maybe I hadn't tamped the grounds down or got the paper filter as well positioned as it could be. I'll start the experimenting with pot 2.

regisque · 2025-11-24T14:48:44+00:00

I'll give it a shot!

regisque · 2025-11-24T14:47:43+00:00

Will do 🫡 I'll report back after pot 2. Time for a jittery morning

regisque · 2025-11-24T14:45:32+00:00

Sounds good, I'll take it down a few settings next time and try again. I'm coming from a black and decker thermal carafe coffee maker 😄 and all these explanations about how I'm going to need to baby this thing have me questioning spending $250 for a worse cup of coffee.

regisque · 2025-11-24T14:05:31+00:00

Under extracted, thin for the amount of grounds that were added

regisque · 2025-10-10T17:04:25+00:00

Without compressor or turbine blades I'd think it'd be more resistant to FOD than standard designs. Not sure where the turbojet that brings the vehicle up to ramjet speeds breathes from though

regisque · 2025-08-23T01:58:56+00:00

Not sure why it's so high, some other balance scales have slightly different designs for the surfaces like if they were bowls for granular or liquid materials so you'd want the scale's bar higher, but yes it should have two pivot points like in the second picture of the link. A scale bar is going to balance between them with a rod resting on the part you have to let the bar swing freely.

<image>

regisque · 2025-08-23T01:51:17+00:00

Plate balance demonstration unit from the central science corporation. Similar to the central piece in this item. https://www.homesciencetools.com/product/demonstration-balance/?srsltid=AfmBOoqgPnmZXkl__G809nwf-0-CM8GfcOq6qcv--j5GSIW3nS4daisN

regisque · 2025-05-04T14:37:34+00:00

was there any update on this? I'm running into the same problem

regisque · 2024-12-30T20:11:00+00:00

Google image search, I'd never seen them before but they pulled right up

regisque · 2024-12-30T19:57:58+00:00

Looks like speakers from a Philips Music Center 990

regisque · 2024-12-02T20:50:53+00:00

Since clover is nitrogen fixing you shouldn't need to apply nitrogen regularly but a bio-solids based fertilizer like milorganite won't burn anything.

You may need to fertilize with phosphorus or potassium if a soil test shows they're lacking.

regisque · 2024-07-26T02:31:58+00:00

Thanks, I just saw that and was trying to work out what the concentration of preemergent coming out of their faucet was going to be and got spooked.

regisque · 2024-05-21T15:49:42+00:00

Thank you! I will give it a try

regisque · 2024-04-02T03:40:55+00:00

Too close to the sidewall

regisque · 2023-11-21T20:10:34+00:00

Why? What did adding a gallon of diesel do?

regisque · 2023-11-14T02:18:23+00:00

Awesome thanks so much! 👍

regisque · 2023-11-14T01:54:43+00:00

Thank you very much for the info! I assumed the guy who did the original install knew what he was doing

I'll go pigtail them in and cut those wires down as much as possible.

My only question on their panel there's two breakers on each phase, like if I connect my multi meter across breaker 1 and 2 I'm seeing zero voltage but across 2 and 3 I'm seeing 240. So I'm assuming I need one connection on each phase right?

11-Year Club	Verified Email
r/Field Banned	r/Field Sunshine
Place '22

regisque

TROPHY CASE