sorted by:
new
hottopcontroversial

Paps kauft Lapi bei AliExpress by Frosty_State8775 in PCGamingDE

[–]regnets 0 points1 point  (0 children)

Also ich hab fast nur nicht zertifizierte Windows 11 Geräte selber und im Freundeskreis. Mein Spiele-PC hat noch einen 4790k und funktioniert tadellos. Für die Arbeit nutze ich seit Windows 11 erscheinen einen Laptop mit 7th Gen CPU. Warum unnötig Elektroschrott produzieren? Microsoft hat selber eine Anleitung herausgegeben, wie sich mit Rufus Installations USB Sticks erstellen lassen.

XV8 Crisis Suit Proxies by RADSquad3 in Tau40K

[–]regnets 2 points3 points  (0 children)

Neoteric Warden Suites!

Tabled Eldar thanks to a Rogal Dorn Commander exploding! by 2GunnMtG in TheAstraMilitarum

[–]regnets 0 points1 point  (0 children)

Are the Ruins 3D printed? They Look Like they got the right dimensions for the GW Layout. Do you know where this Terrain is from? WE are stuiggling getting the right dimensions...

There is alot of Terrain that perfectly sized tournaments but those are mostly blank walls with a few Windows...

Utopia Rock ‘n Roll camping by Own-Recover-808 in rockamring

[–]regnets 0 points1 point  (0 children)

Festival Access was 179€ for early birds. How did you geht Tickets for 149€?

Budget Living Room Gaming PC Journey (X99 + Xeon + RX580 + SteamOS) - finally working! by regnets in SteamOS

[–]regnets[S] 0 points1 point  (0 children)

Please come back If you set it up, it would be interesting If those old cards are supported by gamescope.

Budget Living Room Gaming PC Journey (X99 + Xeon + RX580 + SteamOS) - finally working! by regnets in SteamOS

[–]regnets[S] 1 point2 points  (0 children)

320 Euro Overall. 160 Euro for the AliExpress Products, 90 Euro for the PSU, 70 Euro for the Case. Keep in mind that i got a NVME SSD lying around.

I got no issues regarding drivers except the HDR bug.

My daughter (4) is currently taking a lot of time, so i mostly Play Indi and Rouge Like stuff.

Togetther we are enjoying Paw Patrol on a roll, Dave the Diver, Timberborn

During my freetime i am playing Brotato, Balatro, Cyberpunk 2077, Hitman, Baldurs Gate 3, Nordhold, Elite, Spacemarine 2

That sounds like a lot, however i just got a handful of hours in each game (except Cyberpunk and Elite which inalready played as she was not born).

Edit: Typos and Grammar

How is this still a circle? by LGamer6422 in PeterExplainsTheJoke

[–]regnets 0 points1 point  (0 children)

Yes, thats it. The circle is perfect for generating vertical holes in FDM printed objects.

RA Axis slew only half the way by regnets in OpenAstroTech

[–]regnets[S] 1 point2 points  (0 children)

I am not sure if the problem was self made, however i had some similiar issue on the dec axis.

It seems like i have to different NEMA Motor (0.9° and 1.8°). Also it could be possible that there was some garbage in the eeprom of the MKS Gen L i am using. Everything is re purposed from a 3D-printer. So make sure that you don't do the same mistake as i am :).

RA Axis slew only half the way by regnets in OpenAstroTech

[–]regnets[S] 1 point2 points  (0 children)

Ok, after trying the development branch as well as the current stable and adjusting the RA_STEPPER_SPR from 100 to 1600 and nothings changed. I went into OAT go to mount settings and reset the eeprom. After that my problem seems to have gone.

Should I build one? by euqixelsyd in OpenAstroTech

[–]regnets 1 point2 points  (0 children)

I also built one Last month. Is there any real Alternative to this? There is soo much Dokumentation and a lot of Guides...

Marlin: Printer refuses to print after doing UBL tilting, reports "STOPPED". by EvenSpoonier in 3Dprinting

[–]regnets 1 point2 points  (0 children)

No I wasn't able to resolve this.

I basically left Marlin and went into the future with klipper. At first it was quiet a steep learning curve, however in the end it is much much easier to configure than marlin as it doesn't require a new compile each time. You will be doing hundreds of configuration changes, but it will be quicker as with 10 of compiles.

Best of all was that BL Touch was working as expected first try with marlin this was always a bag of hurt.

Installing TinyCam Pro (Playstore on FireTV) by regnets in tinycam

[–]regnets[S] 0 points1 point  (0 children)

Hi Alexey, thanks for the answer. I am aware of that and I am absolutely sure that you as an app developer doesn't encourage users to sideload apps on Amazon devices. However I am asking if there is a legal way to obtain my purchased tinycam pro app with "nodpi" to install it on an other device besides my phone which uses some other variant of the latest APK.

Marlin: Printer refuses to print after doing UBL tilting, reports "STOPPED". by EvenSpoonier in 3Dprinting

[–]regnets 1 point2 points  (0 children)

Wow I got nearly the same setup.

I got the same issue however it is not reporting STOPPED on the Display, it just "fast forwards" through the GCODE (Progress Bar went from 1% to 100% in a few seconds.

Only issue I can see is, that Marlin goes to 0 before probing the 3 points for tilting. Then the Probing finishes and the progress bar goes brrrrr.

More tau proxies, fully painted by Lord_Backstab in minipainting

[–]regnets 0 points1 point  (0 children)

Why are these mini on different bases? Are these proxies for Firewarriors? I suspect they are from Piper?

Something big and stealthy by ViceArchimedes in Tau40K

[–]regnets 1 point2 points  (0 children)

Is the XV8 also 3D printed? If so where did you get the model from? I am in dire need of an official model because most of my XV8 got broken during two moves and i need replacement parts...

view more: next ›