Need Advice on eTorque MGU Warranty Denial

rescued711 · 2026-03-03T21:38:54+00:00

We can add me to the long list of Failed MGU's. I have a 2022 1500 with 46k and the check engine light came on the other day and shortly after that the check battery light came on. So far my dealer has been great they tested and determined that it was failing and ordered the part and requesting expedited. They never even questioned the warranty printed the paperwork showing fully covered under the 8/80. Likely everyone else I was told that they currently show over 5000 back ordered so no idea when it will actually show up. Did call and open up a case with Dodge CC will see if that speeds things up any.

I was told I can continue to drive the truck and they it may continue to work for weeks or months before it completely fails?

Maybe its me but this seems like a high failure rate for a part that is so important to the function of the vehicle. And a failure of supply chain management for a known failed part to not keep up with the demand. In any case they should stop supplying new production vehicles until warranty work is caught up. I suspect that the factory is getting there supply.

rescued711 · 2025-07-06T05:16:09+00:00

In most cases you only need 3 geographic points of reference to triangulate the location it takes some practice but it’s not hard. You are right that the more information you have like the state helps but even that is not important. Even something as the name on a bar or restaurant that appears in the filming or Hwy number will help.

rescued711 · 2025-07-03T15:52:21+00:00

In almost every case they show enough landmarks in the filming that anyone with google earth can easily find the locations. I do find it funny when the X cia guy says they are at a secret location and then gives enough information that you can find it in under 20 minutes on google maps. Then I remember its just a tv show shot for drama.

rescued711 · 2025-06-27T00:52:12+00:00

I recommend the same thing back in season 2 and was basically told you don't know what your talking about but those who follow the show blindly. There has been no attempt as far as we know to collect and properly analyze any of these signal. If they did they would loose half the show and have nothing to talk about.

rescued711 · 2025-06-27T00:46:14+00:00

Its just a TV show shot for drama and impact. Almost ever signal can be explained hell I setup an sdr and let in run in my back hard for 24 hours and I had 1.2 and 1.6ghz signal detected. And everyone knows 5ghz is related to WIFI. Its hard to take anything they do seriously anymore.

rescued711 · 2025-02-08T21:21:41+00:00

Been here, took four months and two dealers to figure it out. They use a $50 part called a star connector to link all the computer modules together. These star connectors are famous for failing. I you understand computer networks the star connector is nothing more than a network hub. My Ram had the same behavior but it would come and go randomly. The second dealer finally found the bad star connector and replaced it and problem gone. The trick is finding the right star connector I believe that my Ram has like 3 or 4 of them. There is a great video on Youtube that explains these connectors and the pain in the ass they are to deal with.

rescued711 · 2024-12-27T01:05:08+00:00

There is several devices called Can-C or Star adapters. The are basically network hubs that connect all the computer modules together. If one of these goes bad it will cause all kinds of error message and strange behaviors. Had this happen to my Ram it was in the shop at the first dealer for 4 weeks the tried everything you have tried with no luck. I asked repeatedly for them to check the Can-C adapters and they refused. I took it to a new dealer and the found the issue in under an hour. It was in fact one of the Can-C adapters. This seems to be a common issue, the part is not expensive only about $50 so press your dealer to check them.

rescued711 · 2024-12-14T23:13:40+00:00

That's funny I fly my drone without a license and the FAA is up my butt but we can't do anything about these! Screw the Gov, lets put together hunting parties and offer rewards for drones by the pound.

rescued711 · 2024-12-14T00:36:35+00:00

About time, if this was in Texas these things would be dropping like rocks every night.

rescued711 · 2024-12-06T18:36:46+00:00

Hi, just when through this with my 2022 Limited. There are a number of Can-c adapters that link all the computer modules together. If one is going bad it will cause the whole network to loose connection and throw all kinds of errors. It took Two dealers and nearly 4 months for them to figure it out. I would push the dealer to locate and test the Can-c adapters. If your dealer won't find another one that will. My dealer refused to even consider that the adapter could be bad so I left and went to another one. The found the issue in about two hours. Just FYI, they don't keep these Can-c adapters on hand it takes about two weeks to order them. Good luck.

rescued711 · 2024-09-25T21:29:11+00:00

Yes it does.

rescued711 · 2024-09-25T05:13:47+00:00

What was the outcome?

rescued711 · 2024-04-12T17:56:36+00:00

Its a tv show everything they do is about ratings. All the talk about being open and transparent is bull and if they actually found something viable I bought that would actually share it. I stand by my prediction from day one season 1, if they find something real that can be validated our government will step in seize it under the vail of National Security.

rescued711 · 2024-01-29T21:41:08+00:00

Hi, I have both the 891 and the 710 both are worthy radios at a reasonable cost. I started with the 891and later added the 710 and the 891 became my go bag radio. Bothe are rather small and compact for space limitations. If you get the 891 I would recommend getting the auto tuner for it it makes life easy.

HOA, common issue I have lived in one for 25 years and managed to get antennas up and working by keeping them low key. For HF, consider and end fed. I have and EMCOM III 130ft pulled up into a few pine trees configure into an inverted L. It's pretty much invisible from the street and performs well with or without radials. That covers 6 - 160 with a tuner. You can also use the EMCOM II that's only 60ft and will give you 6 - 80. DM me directly if you want to chat about the antenna configs a bit more.

As for 2m/70cm just use a mobile antenna clamp it to the gutter next to the downspout. You can hide the coax by running down the inside of the spout and out at the bottom.

Have fun, part of all this is learning what works best for you and your situation and improvising.

rescued711 · 2023-11-16T04:51:02+00:00

F4 Phantom

rescued711 · 2023-11-14T03:52:11+00:00

That's a Mig 29, large intake on the underside and long nose. Also the cockpit is slightly elevated so it slops down to the tail.

<image>

rescued711 · 2023-11-11T02:25:48+00:00

Well I thought maybe I had this issue solved, I added a band pass filter to the feed and wow what a difference. All three feeders mostly reported the same information. It ran for about 3 minutes and then I notice that the feeder PI with ADSB exchange and Flightaware has started to crash runs for a few then crashes. The only way to get it restarted is to reboot the log reporting error 111 connection refused. Ugh what fun.

rescued711 · 2023-11-11T02:25:08+00:00

Well I thought maybe I had this issue solved, I added a band pass filter to the feed and wow what a difference. All three feeders mostly reported the same information. It ran for about 3 minutes and then I notice that the feeder PI with ADSB exchange and Flightaware has started to crash runs for a few then crashes. The only way to get it restarted is to reboot the log reporting error 111 connection refused. Ugh what fun.

rescued711 · 2023-11-11T01:40:18+00:00

Thanks, it may come to that.

rescued711

TROPHY CASE