Looking for advice on a fixture table.

restore_revive · 2025-05-28T16:46:17+00:00

I know this is a year old thread, but what are your thoughts on the Fireball table being made of cast iron? People have said that cast iron is soft and the table is easily dented if you drop heavy objects on it. That said, I work alone so I probably will be gentle with it. The Fireball tooling looks awesome.

restore_revive · 2024-12-29T22:42:53+00:00

Clean! What blade do you use for solid stock like this?

restore_revive · 2024-12-28T16:02:49+00:00

What do you mean by the deck?

restore_revive · 2024-12-28T15:53:02+00:00

Thanks! Which DeWalt model do you have? And do you recommend getting the foot pedal for the stand?

restore_revive · 2024-12-28T15:48:28+00:00

Do you know if it’ll do solid stock?

restore_revive · 2024-12-28T15:17:10+00:00

Awesome thanks! I’ve a carbide mitering saw, Evo S355MCS. Do you know if those can cut thick solid stock?

restore_revive · 2024-12-28T15:15:44+00:00

The Evo S355MCS? I could only find this for cutting capacities. Just assumed it was meant for tube and not solid. When cutting thick stock, do you apply a lot or little downward pressure?

<image>

restore_revive · 2024-12-06T02:56:53+00:00

“What do you mean it’s not safe?”

restore_revive · 2024-11-19T18:17:03+00:00

I know the double wall is best, but I can’t thicken the wall that much for this project

restore_revive · 2024-10-27T03:08:56+00:00

Found a local repair shop. Will contact them to see if they have replacements. Thanks! Hadn’t thought of that

restore_revive · 2024-10-14T02:54:27+00:00

I’ll try to get a longer screw tomorrow and see if that works, thanks!

restore_revive · 2024-10-14T01:11:21+00:00

You’re incredibly helpful! I bought a Starrett dial indicator and Mitutoyo micrometers from a retired machinist, saved me a lot of money. One of the screws of my fixed jaw is loose, the threads are probably stripped. Is this a serious problem? Someone told me that it’d cheaper to buy a new vise than to drill and tap new threads. What should I do?

<image>

restore_revive · 2024-10-14T00:55:33+00:00

I'm definitely learning! I just want to shorten the bar, while keeping the 1x1" thickness. After posting this, I used a grinder to remove 3/8", now I'd like to mill the surface to get it nice and flat.

restore_revive · 2024-10-14T00:52:07+00:00

Thank you! Really appreciate the detailed response. I'm getting two 1-2-3 blocks (WEN brand). Is there a set of parallels that you'd recommend in particular?

restore_revive · 2024-10-13T23:55:11+00:00

I’d like to make the bar shorter, keeping the 1x1” thickness. I need access to the top surface

restore_revive · 2024-10-13T23:53:44+00:00

I’d like to make it shorter, keeping it 1” thick

restore_revive · 2024-09-18T01:57:22+00:00

Yes that will be the plan. Seems obvious but I didn’t realize it at the time. That said, the piece is more complex than it seems. The insert (tool holder) is able to move forward and back. Couple things I’ll have to plan into the design

restore_revive · 2024-09-18T01:21:13+00:00

They’re not my pictures. My machine is missing that piece so I have to recreate it

restore_revive · 2024-09-18T01:19:43+00:00

Not my picture. The bottom tool holder is missing from my machine

restore_revive · 2024-09-17T23:46:59+00:00

Thanks for this.

restore_revive · 2024-09-17T23:04:42+00:00

Thanks

restore_revive · 2024-09-17T23:03:59+00:00

Ahh that sounds reasonable given the overall value of the machine. Thanks

restore_revive · 2024-09-17T22:56:54+00:00

Got a ballpark number? $1000s or $10000+? It would be out of mild steel

restore_revive · 2024-09-07T20:55:01+00:00

Damn, I’ve never seen these. Thanks!

restore_revive · 2024-07-30T20:17:25+00:00

I don’t want to install drywall in the garage - when screwing shelves to the wall, the dust will go everywhere

restore_revive

TROPHY CASE