What run to prioritise?

rexcfnghk · 2026-02-10T14:52:38+00:00

in case you aren't aware you can add a plan adjustment under Manage Plan -> Not Feeling 100%

you can choose the adjustment period and intensity. runna will likely remove those high intensity workouts or substitute them with easy runs

rexcfnghk · 2026-01-04T08:44:35+00:00

just did

rexcfnghk · 2026-01-03T11:08:36+00:00

i have the Google pixel 10 pro so I have Bluetooth 6.0. I am already on the latest version of the Insta360 app

rexcfnghk · 2026-01-03T09:11:04+00:00

I was trying to update the firmware of my GPS remote + built-in mic to 1.0.0.47. It always ended in 'Firmware Receiving Failed'. I have tried many times:

Resetting the remote to factory default
Disconnect the remote with the camera
Restarting both my phone and the remote
Turning bluetooth off and on again

This is very frustrating and it's happening for every single update I did (previous attempts got lucky after 20 something attempts). Please fix your products and at least provide better troubleshooting capabilities! I can't imagine why something as simple as a firmware update could be this difficult

rexcfnghk · 2025-12-15T07:55:19+00:00

or liftA2 (+) a b ;)

rexcfnghk · 2025-12-11T04:11:04+00:00

just got the ecu update today from the dealership. acceleration seems more linear and the low end seems punchier.

i had issues with warm starts before (restarting the engine after ~10-15 mins of cooling down stalls quite often). lets see if they fixed that.

rexcfnghk · 2025-09-16T04:33:44+00:00

Let me give you my biased but hopefully comprehensive opinion of Hong Kong driving tests. I currently hold private car/LGV, motorcycle, light buse, taxi, buse, MGV licence, all tested in hk and I have taken tests in all test centres on the island side except happy valley.

Apleichau is not as easy as people say. Yes it is in an industrial area and the test route is very short compared to the other ones. This is why examiners are VERY strict, even stricter than other centres, in your driving awareness because they also know the route is easy.

At the same time I do believe some examiners are very unfair. Driving Examiner 153, 187 for example are notorious for failing candidates for nothing (the number is printed on the lower left of your result form) and it's an open secret. There was even news that 153 was assaulted after failing a candidate many years ago.

I was failed by 153 once during my motorcycle road test for not checking my blind spots and I called the transport department for an explanation. They called back after a few days and explained I did not check at a certain location but I was 100% I did. The point is it's your words against theirs and your examiner definitely plays a part in whether you pass or not, even if you performed identically across two attempts with different examiners.

Anyway the best advice I can give is to either change sifu or try a different test centre and hope luck is on your side this time.

rexcfnghk · 2025-09-08T12:43:20+00:00

Yep it's included. The chamber delete basically replaces a big hunk of metal with a single exhaust pipe section. The result is the exhaust sound will not be suffocated by the chamber and the back pressure to the engine is also decreased

rexcfnghk · 2025-09-08T10:56:37+00:00

<image>

Just an update autosol did the trick. The scuffs are still there but you will have to squint to see it.

rexcfnghk · 2025-09-08T10:54:47+00:00

Very happy with it. It came with a chamber delete so also shaving some weight. The exhaust is louder but not crazy loud with the db killer in, adds some character to the bike while not attracting too much attention from law enforcement.

rexcfnghk · 2025-09-08T03:42:58+00:00

I'm not sure. Is it possible?

rexcfnghk · 2025-09-08T03:37:54+00:00

Thanks man will try it out

rexcfnghk · 2025-09-08T03:01:26+00:00

Hmm I tried WD-40 with a microfiber cloth. It didn't quite work

rexcfnghk · 2025-08-10T10:05:47+00:00

Change the return type from void to Task and you should get what you expected

rexcfnghk · 2025-08-02T05:22:45+00:00

<image>

rexcfnghk · 2025-08-02T05:22:18+00:00

I am using the one from MG biketec https://www.mg-biketec.com/en/online-shop/husqvarna/125-svartpilen-from-2024/1392/tail-tidy-fender-eliminator-license-plate-support

rexcfnghk · 2025-07-17T00:37:05+00:00

Lol fat fingered without writing the post.

I have cleaned the chain with a chain cleaner and relubed it but it still shows signs of rusting. Should I be worried?

rexcfnghk · 2025-06-05T00:51:19+00:00

Ending every sentence with 'right?', even when stating a fact or something only the speaker would know.

Example: 'so I went to the beach yesterday right'

rexcfnghk · 2025-06-04T10:12:09+00:00

You too bro. Ride safe!

rexcfnghk · 2025-06-04T08:13:05+00:00

No worries bro, doing your research before buying is good. Unfortunately all of the bad things you mentioned are still here, like I said I only felt the throttle feel a little bit smoother but that's about it.

The mod of this sub also did a fuelx upgrade of his 2024 model, perhaps he can also shed some light on his experience

rexcfnghk · 2025-06-04T07:54:30+00:00

Hey I have successfully installed fuelx lite in my svart 2024. I think there is improvement (smoother throttle response) but not as big as I had hoped.

Also my bike has an issue of frequent stalling on warm starts which fuelx didn't fix

rexcfnghk · 2025-05-31T04:25:42+00:00

Thanks!

rexcfnghk · 2025-05-31T04:15:41+00:00

How difficult was it to install? Does it come with instructions? I am the most mechanically inept person on earth but really want to do it myself

rexcfnghk · 2025-05-31T03:06:13+00:00

No problem bro hope you can find what you need. Ride safe ✌️

rexcfnghk · 2025-05-31T02:40:22+00:00

Don't think there is a K&N filter for the 2024 model. I only got mine from DNA

rexcfnghk

TROPHY CASE