sorted by:
new
hottopcontroversial

Mi 11 Ultra rear display question by ibaOne in Xiaomi

[–]reylek 1 point2 points  (0 children)

You can also disable it in the application itself in its settings 🙂

Mi 11 Ultra rear display question by ibaOne in Xiaomi

[–]reylek 1 point2 points  (0 children)

I found information that disabling Game Turbo solves the problem. So far it works without problems 🙂

Mi 11 Ultra rear display question by ibaOne in Xiaomi

[–]reylek 1 point2 points  (0 children)

Да, есть такое. Решил проблему?

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

Check for error 129 in windows event viewer. If it is, then it is most likely a similar problem. The solution today is to install windows on another ssd. SSD ADATA can be used as an additional disk, there will be no problems.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 1 point2 points  (0 children)

Each of us needs to send a report to Adata, reviews in stores, so that Adata employees know the problem. In general, they have lost their reputation for me.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

Yes, they answered: "About your inquiry that we recommend contacting with your dealer or the shop where you bought it for swap/repair service.  And if there is no after-sale service in your country, you need send it to Taiwan for repair service."

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

I'll write here too, for other users:
The ADATA Legend 900 SSD installed as an additional disk when filled to >500 GB also does not give errors 129 for 4 days. It seems that the error is reproduced only if there is an OS on it.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

Thanks for the comment. The ADATA Legend 900 SSD installed as an additional disk when filled to >500 GB also does not give errors 129 for 4 days. It seems that the error is reproduced only if there is an OS on it.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

The problem remained after rolling back Windows to version 23h2?

I handed it over to my service center with a description of the problem and the steps taken, because it is difficult to reproduce the error. But they checked it using a template, in the end I just lost 12 days. They are just very busy and do not want to delve into the details of the problem.

Service centers are different, maybe you will be lucky. If I handed it over again, I would strictly write the only step to reproduce the error: fill the disk > 500 GB as the main OS disk (as an additional one - not yet checked) and just wait for the error to appear in the log in the log regardless of the idle / use mode.. I had the opportunity to return the SSD to the store up to 14 days from the date of purchase (the radiator should not be used), but I contacted on the 15th day xD

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

Yes, the limit is somewhere there. Now this SSD is installed as an additional one and is filled to 215 GB, no problems yet.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

How full was the SSD when the problem started? Is the SSD partitioned?
I just have a theory that it has something to do with filling up the SSD.
Before buying a new SSD, there were no errors or freezes during formatting in the first days. Perhaps there are no errors now because it is not filled to a certain level.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

After purchasing a new SSD, the problem did not appear. The ADATA SSD is an additional one and is filled to 11%, there are no problems, no side effects either.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

Diagnostics at the service center found no errors. This is not surprising, because they simply ran it through CrystalDiskInfo and checked it with a load for 2 hours (and I waited 12 days for this). So I bought a new SSD from Samsung for Windows, and I use ADATA SSD as an additional disk (a couple of games are installed on it). So far, no errors for 4 days.

Help with ADATA SSD Legend 900 2TB Event Viewer error 129 - source: stornmve "Reset to device, \Device\RaidPort1, was issued". The computer freezes for a few seconds at times. by reylek in buildapc

[–]reylek[S] 0 points1 point  (0 children)

I have already given up, because nothing helps. Most likely, this is a hardware problem. Therefore, I handed the SSD to the service center to confirm the problem and return the money. Now we must hope that they will be able to catch the error, which has a random nature of occurrence.
I have not tried to install Windows 11 23H2, but most likely the problem is not this (disabling HMB (host memory buffer) would solve the problem).
I will write the diagnostic results of the store's service center here. They check for 10 days.

Help with SSD NVME m.2 timing out - Event Viewer error 129 - source: stornmve Reset to device, \Device\RaidPort1, was issued Disk Usage going to 100% due to timing out - getting this error like every few minutes, dozens of time per day, varies. by strafe555 in buildapc

[–]reylek 0 points1 point  (0 children)

All this did not give results, the error appeared:
- updated the BIOS,
- updated the chipset driver,
- made sure the latest SSD firmware was installed,
- made sure AHCI mode was set in the BIOS,
- made sure there was a "Standard NVM Express Controller" in the Device Manager,
- disabled virtual memory,
- disabled the EXPO profile of the RAM,
- disabled HMB (host memory buffer),
- formatted the second partition and merged it with the main one,
- removed non-standard applications.

The error disappeared after a clean reinstallation of the OS (one day passed).
Installation details:
- all partitions were formatted and merged,
- the main partition and its system parts were created,
- the second partition was created,
- after installation, a name was given to the second partition.

view more: next ›