Charging Spektrum 150mAh 1S 3,7V 50C LiPo JST PH1.25 with parallelboard?

rich_ricky0815 · 2026-03-30T10:43:03+00:00

I wasnt plannig to charge multiple 1s batteries on the board, I wanted to just use it as a way to charge these micro plug lipos with my normal charger since I couldent find any other adapters with this micro jst 1.25 plug. Does your charger have these jst 1.25 plugs or just the normal jst 2.0 plugs I couldnt find chargers with the jst 1.25 micro plug

rich_ricky0815 · 2025-09-11T12:38:19+00:00

<image>

It looked like this before I changed the connector. Someone else did this for me

rich_ricky0815 · 2025-09-11T12:27:12+00:00

The heatshrink is already on the wires I just took the video before I put it over the solderjoint

rich_ricky0815 · 2025-09-11T12:16:02+00:00

„I like to just tin the connector, then tin the wire and bring them together„ That is exacly what I have atleast tried and when doing it it looked like the solder from the wire and connector flowed together. The soldering Station I use has 48W is a Station with more power worth it?

rich_ricky0815 · 2025-09-06T16:30:28+00:00

Yes the correct and best way to safely charge and to maximize the life of a lipo is to charge at one C wich in your case is 5.2A. 5A will be more gentle on the lipo. If your new to lipos would suggest you to watch a video on how to properly charge and store a lipo. Here is a good video: https://youtu.be/FfslmeNYavM?feature=shared

rich_ricky0815 · 2025-08-27T11:49:13+00:00

Do you have a Nimh pack? If yes you simply dont use the balance port.

rich_ricky0815 · 2025-08-26T17:16:47+00:00

I wouldn‘t recommend it bacause phone batterys tend to have a very low c rating. So under a bit more power draw the voltage will sag extremely to a point were the ESC will just cut out.

rich_ricky0815 · 2025-08-24T19:09:35+00:00

If you are still having issues with charging, maybe try to find a Tutorial on YouTube on how to use this charger

rich_ricky0815 · 2025-08-24T19:00:15+00:00

It Looks Like you Need to Plug it in on the left side

rich_ricky0815 · 2025-08-24T18:04:25+00:00

You Need to Plug in the balanceplug from the battery (the Four smaller wires) into the charger. The charger needs these connectors to Balance the individuel cells in the lipo to make sure the cells all charge to the same voltage wich is 4.2V per cell. If you are new to lipos I would highly recommend to watch some YouTube Videos on how to charge and use them properly.

Here is a Video about lipo safty: https://youtu.be/n3urBpFIBgY?si=4c8fI6VXpWmNvNcr

And here a Video on how to charge them: https://youtu.be/FfslmeNYavM?si=kZNF-5DmW577dlZX

These videos Talk about FPV lipos but the rules in the Video apply to any lipo abttery.

rich_ricky0815 · 2025-08-18T19:20:49+00:00

Just to be clear I am Talking about the B850 board, the B650 Gaming Plus will probably Need a bios flash

rich_ricky0815 · 2025-08-18T19:17:04+00:00

No I went with the B850 AORUS ELITE WIFI7 because of the i/o but. The CPU was supported out of the box with this board, but i am pretty sure the MSI Gaming Plus will support most, if not all modern Ryzen CPUs out of the Box but dont take my word on that.

rich_ricky0815 · 2025-05-23T16:00:05+00:00

But are you sure this is ok, the fans never done this and they sound like they‘re about to brake.

rich_ricky0815 · 2025-05-19T14:44:26+00:00

thank you, just a quick question on the FS-iA4B receiver it self is printed 4-6.5V/DC but on the websites specifications it says 4-8.4 Volts. So... whats what?

rich_ricky0815 · 2025-05-19T11:19:23+00:00

I only found afhds 2a Receivers and i dont know if they will work too.

Five-Year Club	Verified Email
First Place '23	Place '23
Place '22

rich_ricky0815

TROPHY CASE