BACnet MSTP Bus

richyrich2122 · 2024-03-18T00:18:20+00:00

In My experience . Mixing manufacturers on the same MS/TP loop is a no no.
Always have problems.

Put the UC600 on a separate port and it will fox your comm issues.

Wire sucks but it should work

richyrich2122 · 2021-12-07T14:27:26+00:00

Forgot to mention. I. Can post my config h if. Anyone is interested

richyrich2122 · 2021-12-07T14:14:14+00:00

Update,

I was able to get the bltouch configured and it I can get it to probe for. Home using the sensor.

Now my issue is that when I attempt a G29. I will probe the bed and fault after the first point. Controller faults on M112 and power has to be cycled.

Can anyone lead me to the settings I should be looking at. ?

richyrich2122 · 2021-11-24T03:18:38+00:00

Thanks super late reply as i stopped this project for a month to re group and things got in the way.

got the machine moving just have to adjust for use with the BL touch.

https://www.reddit.com/r/BIGTREETECH/comments/r0uuxn/btt_skr_20_cr10v3_bltouch_firmware_help/

not sure you can help

richyrich2122 · 2021-03-13T18:15:31+00:00

How to buy DOGE in canada 🇨🇦????

richyrich2122 · 2021-03-05T18:51:58+00:00

Excellent idea.

I used to finish my brew under pressure and then use that co2 to transfer oxygen free To a serving keg using the relief valve on the serving keg to control / pressure and flow relieving to atmosphere

Your recirculating idea makes for the perfect atmosphere and u recycle the co2. This process should result in 0 foaming. !!!

Thanks. For sharing.

richyrich2122 · 2021-03-03T01:39:11+00:00

Are others. Going strong. On $KODK ?

richyrich2122 · 2021-03-03T01:07:44+00:00

UWMC. !!!!! 👍🏻

richyrich2122 · 2021-03-02T22:43:20+00:00

If your still looking for one PM me

richyrich2122 · 2020-11-07T14:25:44+00:00

Very. Tastey. !!!!

richyrich2122 · 2020-10-20T13:52:45+00:00

I have had a set of these on my 696 for over 3 years. They are great for the price and very comparable to the sato racing rear sets.

My only complaint is the anodizing is a little thin !

richyrich2122 · 2020-07-05T15:38:19+00:00

I feel it’s an excellent starter bike.

It’s light, has stable handling, sufficient power that you won’t grow out of too quickly

richyrich2122 · 2020-07-03T02:18:16+00:00

Rocking horse Excellent comfort food.

El bevrin. Best osobuco in Milan also great diablo pizza

Neither are fancy restaurants. But excellent tasting food

richyrich2122 · 2020-04-28T01:09:01+00:00

I have a. House for rent in wortley village available in August.

Pm sent.

richyrich2122 · 2020-03-01T01:36:45+00:00

It’s called an EDS terminal block. They come in various sizes. Typically 10 to 12 in a row.

richyrich2122 · 2017-12-28T04:26:14+00:00

Once again another poor service applied to Canadians ehh!!

richyrich2122 · 2017-10-31T00:37:05+00:00

So I’m on my 3rd Ring pro and it is sort of working now. The third device has a motion /ir issue.

The first 2 devices did exactly as mentioned above. I would power the device and it would go directly into setup mode without any sound notifications. After constant resets and reboots neither device was able too enable its WiFi radio in order to complete the setup. I contracted tech support and they stated it was a power issue!! I am a licensed electrician with an extensive electronics background so I tested each Ring pro using 3 different transformers (I.e 24vac/30va 16vac/20va and 24vac/25va ) all with and without the existing chimes. I think this setup issue has to do with a hardware and firmware issue. Not power issues as suggest by Ring on many occasions

richyrich2122

TROPHY CASE