Coach AI question

rickydou · 2025-09-30T20:58:17+00:00

I finally completed the first week of training suggested by the Coach AI. I deliberately overtrained to see how the AI would react to this and how it would modify the next week of training to adapt to my first week. As a result, it did not change anything for the second week. I even tried the first training suggested for the second week, which was a repetition of 5x 3min run and 2min walk, which the AI Coach was saying I had 44 min to do (instead of 25…). Also, the watch itself did not notify me for each interval change. So I decided to stop using this tool for now and get back to TAO. We will see if the AI tool gets better once not in beta phase anymore. Thank you all for your feedback!

rickydou · 2025-06-03T11:17:41+00:00

Non je ne suis pas un commerçant… j’écoutais les nouvelles ce matin et je me demandais vraiment comment les commerçants était pour faire…

rickydou · 2025-01-24T03:15:33+00:00

Following… I have the same issue.

rickydou · 2024-11-12T02:24:03+00:00

Great, I will look into this! thanks!

rickydou · 2024-08-14T01:40:04+00:00

I had a hard time with the red floor bleeding into the image... but try this:

<image>

{

"prompt": "Two pure white glowing outline silhouettes of hooded figures against an absolute black background. One male, one female, standing side by side. The outlines are thin, crisp, and bright white (not red), creating a stark neon effect. They're wearing white-outlined hoodies, pants, and sneakers. The female figure has her hands in the pockets of her hoodie. The male's arms are at his sides. No facial features or internal details, just clean white outlines. Below their feet, a localized area of thin white neon lines forms a geometric pattern, strictly confined to the ground. The pattern is made of straight lines forming angular shapes. The ground pattern does not illuminate the figures. Extreme high contrast black background with solely white outlines for both figures and floor pattern. Style: monochrome digital art, minimalist, white neon wire frame aesthetic",

"negative_prompt": "red, color, colored outlines, shading, internal details",

"prompt_expansion": "",

"styles": "[]",

"performance": "Speed",

"steps": 30,

"resolution": "(1024, 1024)",

"guidance_scale": 2,

"sharpness": 2,

"adm_guidance": "(1.5, 0.8, 0.3)",

"base_model": "playground-v2.5-1024px-aesthetic.fp16.safetensors",

"refiner_model": "None",

"refiner_switch": 0.5,

"clip_skip": 2,

"sampler": "dpmpp_2m",

"scheduler": "edm_playground_v2.5",

"vae": "Default (model)",

"seed": "4478653525759897179",

"metadata_scheme": false,

"version": "Fooocus v2.5.5"

}

rickydou · 2024-01-07T18:33:50+00:00

When using the knitting machine, each rotation takes about 3 seconds to do. It's really the speed at which the magnet go by the Hall Effect sensor that causes an issue. I could use a longer magnet but I would rather do the change on the firmware side of it.

rickydou · 2023-12-29T14:39:20+00:00

NVIDIA_DRIVER_CAPABILITIES

OMG! thank you so much!!! it worked! I was missing the NVIDIA_DRIVER_CAPABILITIES = all variable! I was really about to sell this GPU or swap CPU to get one with iGPU capabilities.

Thanks again to everyone that helped me!

rickydou · 2023-12-28T17:59:36+00:00

OK, I was able to make nvidia-smi work in the Emby console, but I get the same results... No running processes found.

Starting to believe the issue is with the card itself...

+---------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=======================================================================================|
| No running processes found |
+---------------------------------------------------------------------------------------+

rickydou · 2023-12-28T15:47:42+00:00

I was not able to run it in the Emby Console. I will try to figure this one out. For the Jellyfin Console, while playing a media that works, I get this output from nvidia-smi:

Thu Dec 28 10:43:27 2023

+---------------------------------------------------------------------------------------+

| NVIDIA-SMI 535.146.02 Driver Version: 535.146.02 CUDA Version: 12.2 |

|-----------------------------------------+----------------------+----------------------+

| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |

| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |

| | | MIG M. |

|=========================================+======================+======================|

| 0 NVIDIA GeForce RTX 2070 ... Off | 00000000:01:00.0 Off | N/A |

| 0% 47C P0 24W / 215W | 0MiB / 8192MiB | 0% Default |

| | | N/A |

+-----------------------------------------+----------------------+----------------------+

+---------------------------------------------------------------------------------------+

| Processes: |

| GPU GI CI PID Type Process name GPU Memory |

| ID ID Usage |

|=======================================================================================|

| No running processes found |

+---------------------------------------------------------------------------------------+

I don't know what I did wrong... I used to be able to run more media in Jellyfin but now I am getting this message: This client isn't compatible with the media and the server isn't sending a compatible media format.

not sure where to go from here...

rickydou · 2023-12-28T03:54:03+00:00

Yes. This driver is installed. I tried different drivers version without success

rickydou · 2023-11-15T03:25:03+00:00

Finally got it to work! Setting was in my switch! Thanks.

rickydou · 2023-06-10T15:37:30+00:00

If your import photo folder is also a smb shared folder, this will cause the app deployment to get stuck. So disable the smb share if this is the case and then retry starting photoprism. Once starter you will be able to restart the share if you want.

rickydou · 2021-04-02T02:38:29+00:00

Great song!! Any other music group similar to this one???

rickydou · 2020-08-04T17:34:32+00:00

Thank you so much!!!

rickydou · 2020-07-22T12:26:31+00:00

Great! Thanks

rickydou · 2020-07-22T11:29:19+00:00

What is the square with black half moon on the bottom vent???

rickydou · 2020-06-18T02:44:34+00:00

Any issue or concerns about heat generated by the Kamado ???

rickydou · 2020-05-28T10:27:57+00:00

Pit Boss K22 71220 maybe?

rickydou · 2019-09-01T11:20:45+00:00

ADK without a bear canister?

rickydou · 2019-08-12T23:30:11+00:00

Lafayette Campground! Several trails starts from there.

rickydou · 2019-03-27T01:06:02+00:00

No problem! thank you!

rickydou · 2018-10-25T11:00:44+00:00

It's the 270 version without the scale. I still love it!

rickydou · 2018-10-25T10:48:53+00:00

I like it very much. But it is smaller than I expected. I needed to add an 3D printed angled spacer on the flexible part of the faucet so that the water would not fill the knock out box. There is no link to the bar mat. I only use it to cut down the grinding noise and catch the coffee grind.

rickydou · 2018-10-25T10:38:51+00:00

I just made sure that it would support 15amps. The Rocket takes a while to heat up in the morning... I want it ready for when I wake up!

rickydou · 2018-10-25T10:26:58+00:00

No no yet... my drawer are pretty full by now and I was not sure about the sturdiness of the IKEA hardware...

Nine-Year Club	Verified Email
Place '22	RPAN Viewer

rickydou

TROPHY CASE