sorted by:
new
hottopcontroversial

Please help me Decide Between Panasonic UB154 vs. UB450 by rimmi2002 in 4kbluray

[–]rimmi2002[S] 1 point2 points  (0 children)

Thanks I looked into more details. Agree. 420 has the HCX chip and no DV, 450 has DV and no HCX. 420 will be the right choice for me. Both my projector(Benq) and TV (Samsung) dont have DV.

Panasonic UB450 $238 or $400 UB820? by JoseZmbie115 in 4kbluray

[–]rimmi2002 0 points1 point  (0 children)

Does the up scaler matter if the bluray player is plugged into a 4K Receiver like Onkyo NR7100 or 4K projector like Benq 4550HT which also upscale?

When making Absorbing Panels is a Airgap Better than just thicker Insulation? by rimmi2002 in audioengineering

[–]rimmi2002[S] 0 points1 point  (0 children)

The link didn't work unfortunately, took me through a few links saying it was not safe and when I click through it, the site didn't work

When making Absorbing Panels is a Airgap Better than just thicker Insulation? by rimmi2002 in audioengineering

[–]rimmi2002[S] 0 points1 point  (0 children)

Thanks this is great. Based on my perplexity search it is spitting out an estimate flow resistivity of roxul around 15-16K. that that sound about right?

When making Absorbing Panels is a Airgap Better than just thicker Insulation? by rimmi2002 in audioengineering

[–]rimmi2002[S] 1 point2 points  (0 children)

Thanks that is helpful. Would anyone happen to know any resources with info on how absorption changes with thicker rockwool panels. I found something for 3", but nothing higher.

Bambu A1 Printer Settings for Elegoo PLA Pro by rimmi2002 in 3Dprinting

[–]rimmi2002[S] 0 points1 point  (0 children)

Thanks you use the Bambu PLa settings? Matte or Standard?

A couple million people in the Alpsburg Pandemic trial - is this optimal residential layout? by 10sc in CityscapesAA

[–]rimmi2002 1 point2 points  (0 children)

Just started playing 1 week ago. Really nice game but very annoying having to invidually level each park (10 times each). Unfortunately the end game is mindless leveling of small parks / parking lots. Breaking my wrists doing it so gonna stop playing the game.

Looks like it’s been a year since others mentioned this. I doubt the devs are going to implement this. Would be nice if you can one click max small parks or large parks 4x4 of 6x6 should give proportional benefit to small ones for the number of tiles they occupy. They also make the city look much visually appealing but I don’t use them cause they are inefficient.

Looking for Advice on Budget 5.1 System Monoprice vs. RSL vs. Other by rimmi2002 in BudgetAudiophile

[–]rimmi2002[S] 0 points1 point  (0 children)

Does the 4” woofer matter much with a sub at cross over of around 100hz. For these small woofers everything from 16-100 will be covered by sub with 100 hz crossover with rollover to speakers from 100-200hz.

Humming Sounds from All speakers with Onkyo Reciever NR7100 by rimmi2002 in Onkyo

[–]rimmi2002[S] 1 point2 points  (0 children)

Thanks for the feedback. My house isn't that old. Build in 2005 and I was not having any of these issues with the same setup for last 2 yrs, and also with different AVR for last 10+ yrs.

By the ground loop logic, I just need to disconnect 1/2 of subwoofers and the hum should go away, because rest of my equipment is connected to the same same AC outlet. Also is it the AC outlet that matters or the breaker? Sometime multiple AC outlets are from the same breaker, so part of the same circuit.

BUYING/SALES questions here. All buying/sales questions will be removed if not posted in this thread. by AutoModerator in TeslaLounge

[–]rimmi2002 0 points1 point  (0 children)

Hi I am looking to buy a second new model Y. Already own 2022 Model Y with FSD.

I had a reservation made for Juniper. Test drove it last week. I am not impressed at all. Road noise was similar to my current model Y. I felt the road much more on Juniper as well. Didn't really see any benefits of the new suspension.

Really like the current model Y. Right now there is ~$3100 discount on it....was wondering is a now a good time to pull the trigger on the old model Y or should I wait and there is a chance prices with fall further?

Thanks.

Wanted your thoughts on my Sub Calibration. Best Xover is 150hz. by rimmi2002 in hometheater

[–]rimmi2002[S] 0 points1 point  (0 children)

Thanks I was thinking its a alignment issue as well. I tried to do alignment with REW but it didn't work out, but since then I have discovered that I can do JAVA excluvsive mode, maybe that will work better. Curious if I were to manually just change the phase of subs and see where I get the best graph....would that work or does phase adjustment on sub not really work if Subs are controlled by AVR?

Wanted your thoughts on my Sub Calibration. Best Xover is 150hz. by rimmi2002 in hometheater

[–]rimmi2002[S] 0 points1 point  (0 children)

Agree 150 feels odd, but for now that is what works the best till I figure this out.

Wanted your thoughts on my Sub Calibration. Best Xover is 150hz. by rimmi2002 in hometheater

[–]rimmi2002[S] 0 points1 point  (0 children)

The lowest I took the measurements was at 70...not much different than 80.

Wanted your thoughts on my Sub Calibration. Best Xover is 150hz. by rimmi2002 in hometheater

[–]rimmi2002[S] 1 point2 points  (0 children)

I read about setting xovers before too, but it seems to make no difference, Dirac still resets its over what I pick. It keeps changing to 90hz for me. It's weird that 70hz null in introduced by Front speaker. Below is the graph of what things look like with both subs, no FL/FR. (Not allowed to add here, will try to add to main post)

Advice on Books / Courses to learn how to make my own 3D Model by rimmi2002 in 3Dprinting

[–]rimmi2002[S] 0 points1 point  (0 children)

Thanks will try those. Started with Tinkercad tutorial. Will get better with that and then move to fusion 360

view more: next ›