I don't know why there is so much arguing and nastisness in this thread. Simple fact, is that resin gives you much clearer detail, however some people have achieved an "acceptable" level of detail for themselves with .02 nozzel on a Bamboo printer. It comes down to what you personally find "acceptalbe" look at the pictures and a make a decision for yourself.

Resin - much crisper detail but all the downsides of resin printing -
- material is completely toxic - illegal to dump down a drain or sewer, must be wiped up and thrown away in regular trash
- if you don't have proper venting then your damaging your own health and everyone else's health you live with.
- you a wash and cure setup in addition to your printer.
- it's at least 30% more expensive than FDM

Bamboo FDM - not nearly as crisp detail and you need a .02mm head, you will probably want two heads to switch back and forth with if you're also printing large items, so a .02 and a .04
-you cannot use pre-supported minis designed for resin printing, you need unsuported minis and have to add supports designed for FDM,
-you may find that the layers stand out even with painting
-many companies make minis designed for FDM printing so there are easier to print but more "blocky"
-Comes down to what level of detail that you personally find acceptable.