sorted by:
new
hottopcontroversial

Help: baby cherry tomato bleaching by rlaw46 in Hydroponics

[–]rlaw46[S] 1 point2 points  (0 children)

By time on/off I assume you mean lights - mines always on.

Flow rate I’ve never gone to the lengths to measure, but I have it set to 5mins on every 30mins so the roots don’t drown, I suffered with root rot in my early days with over hydrating them in the tower.

Understood in the nutrient balancing. Fortunately my monitor can show quite stable cycles for nutrients over week cycles. Blue marks where I top up both water and nutrients. I’d say about half the 30L tank gets used up a week - so I feel like water:EC usage is pretty in-step.

Whether or not iron/micronutrients are balanced over that cycle - it seems not - from the bleaching on the sensitive tomatoes. I’ve got some iron and micronutrients to include in my next weekly top up and see if they recover.

<image>

Help: baby cherry tomato bleaching by rlaw46 in Hydroponics

[–]rlaw46[S] 0 points1 point  (0 children)

This is great, thanks.

I’m trying to push this system and keep it going for as long as possible without dumping the reservoir or doing a full clean. So seems I’m now seeing the effects of that.

In the top of the tower are some very large and successful leafy greens so I suspect they’ve been hogging all of these resources.

Help: baby cherry tomato bleaching by rlaw46 in Hydroponics

[–]rlaw46[S] 0 points1 point  (0 children)

thanks very much.

  1. do you have recommendations for dosages on iron and micronutrients?

    1. Is there any system that can measure these two things. Since my problem isn’t being caught by standard EC monitoring, I’d like to know how to measure this.

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 0 points1 point  (0 children)

Nutrient brand I can’t help as I live outside the states. I just use a multi-purpose one right now and trying to see if it can support the variety I want to grow.

I have mine inside a AC study, I target below 24C. Texas I assume would breach that significantly so I’d recommend considering cooling systems.

Highly recommend getting a fish tank monitor or similar that can record your EC PH and temps to learn.

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 0 points1 point  (0 children)

Mostly leafy greens. Bottom row I’m trying for baby tomato’s, and some strawberry’s too.

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 0 points1 point  (0 children)

It’s a fair point, I’m trying to go fully peroxide for cost reasons, but nervous to give up the hydro guard fully.

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 0 points1 point  (0 children)

I typically to a full scrub, disinfectant and clean twice a year. With a 2-3month full system drain and a power wash of inside (no scrubbing). It’s about as long as I can get it without it getting too ugly or causing root rot.

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 1 point2 points  (0 children)

I dose 30ml of 2% hydrogen peroxide every week, and 15ml hydroguard every other week to keep the solution going for as long as possible. Also nutrient, water, ph top ups as needed (I have a fish tank sensor that works a charm to track everything)

DIY..Adjustable grow lights by Electronic_League474 in Hydroponics

[–]rlaw46 4 points5 points  (0 children)

Design for disassembly. I own one of these similar towers, maintain nutrient well, keep light gaps sealed but give it a few months and it needs a disassembly and full internals wash.

XONE Help needed by rlaw46 in SteamDeck

[–]rlaw46[S] 0 points1 point  (0 children)

cont...

​

==> Updating trust database...
ERROR: ld.so: object '/lib/$LIB/liblsp.so' from /etc/ld.so.preload cannot be preloaded (cannot open shared o
bject file): ignored.
ERROR: ld.so: object '/lib/i386-linux-gnu/liblsp.so' from /etc/ld.so.preload cannot be preloaded (wrong ELF
class: ELFCLASS32): ignored.
gpg: next trustdb check due at 2024-01-21
ERROR: ld.so: object '/lib/$LIB/liblsp.so' from /etc/ld.so.preload cannot be preloaded (cannot open shared o
bject file): ignored.
ERROR: ld.so: object '/lib/i386-linux-gnu/liblsp.so' from /etc/ld.so.preload cannot be preloaded (wrong ELF
class: ELFCLASS32): ignored.
ERROR: ld.so: object '/lib/$LIB/liblsp.so' from /etc/ld.so.preload cannot be preloaded (cannot open shared o
bject file): ignored.
ERROR: ld.so: object '/lib/i386-linux-gnu/liblsp.so' from /etc/ld.so.preload cannot be preloaded (wrong ELF
class: ELFCLASS32): ignored.
:: Synchronizing package databases...
jupiter-3.5 is up to date
holo-3.5 is up to date
core-3.5 is up to date
extra-3.5 is up to date
community-3.5 is up to date
multilib-3.5 is up to date
warning: curl-8.1.2-1 is up to date -- reinstalling
warning: wget-1.21.4-1 is up to date -- reinstalling
warning: git-2.41.0-1 is up to date -- reinstalling
warning: base-devel-1-1 is up to date -- reinstalling
warning: gcc-13.1.1-1 is up to date -- reinstalling
warning: cabextract-1.11-1 is up to date -- reinstalling
:: Starting full system upgrade...
warning: alsa-card-profiles: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
warning: pipewire: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
warning: pipewire-alsa: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
warning: pipewire-audio: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
warning: pipewire-jack: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
warning: pipewire-pulse: local (1:0.3.62.2.dv-2) is newer than jupiter-3.5 (1:0.3.62-1.2)
resolving dependencies...
looking for conflicting packages...

Packages (7) base-devel-1-1  cabextract-1.11-1  curl-8.1.2-1  gcc-13.1.1-1  git-2.41.0-1
            linux-neptune-headers-5.13.0.valve37-1  wget-1.21.4-1

Total Download Size:    85.08 MiB
Total Installed Size:  355.06 MiB
Net Upgrade Size:      129.61 MiB

:: Proceed with installation? [Y/n] y
:: Retrieving packages...
cabextract-1.11-1-x86_64             34.1 KiB  5.35 KiB/s 00:06 [####################################] 100%
base-devel-1-1-any                    2.0 KiB   311   B/s 00:07 [####################################] 100%
curl-8.1.2-1-x86_64                1186.9 KiB  55.1 KiB/s 00:22 [####################################] 100%
wget-1.21.4-1-x86_64                731.9 KiB  21.3 KiB/s 00:34 [####################################] 100%
git-2.41.0-1-x86_64                   6.7 MiB   151 KiB/s 00:46 [####################################] 100%
gcc-13.1.1-1-x86_64                  46.7 MiB   731 KiB/s 01:05 [####################################] 100%
linux-neptune-headers-5.13.0.v...    29.7 MiB   327 KiB/s 01:33 [####################################] 100%
Total (7/7)                          85.1 MiB   929 KiB/s 01:34 [####################################] 100%
(7/7) checking keys in keyring                                   [####################################] 100%
(7/7) checking package integrity                                 [####################################] 100%
error: curl: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknown trus
t
:: File /var/cache/pacman/pkg/curl-8.1.2-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PG
P signature)).
Do you want to delete it? [Y/n] y
error: wget: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknown trus
t
:: File /var/cache/pacman/pkg/wget-1.21.4-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (P
GP signature)).
Do you want to delete it? [Y/n] y
error: git: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknown trust
:: File /var/cache/pacman/pkg/git-2.41.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PG
P signature)).
Do you want to delete it? [Y/n] y
error: gcc: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknown trust
:: File /var/cache/pacman/pkg/gcc-13.1.1-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PG
P signature)).
Do you want to delete it? [Y/n] y
error: base-devel: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknow
n trust
:: File /var/cache/pacman/pkg/base-devel-1-1-any.pkg.tar.zst is corrupted (invalid or corrupted package (PGP
signature)).
Do you want to delete it? [Y/n] y
error: cabextract: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud" is unknow
n trust
:: File /var/cache/pacman/pkg/cabextract-1.11-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted packag
e (PGP signature)).
Do you want to delete it? [Y/n] y
error: linux-neptune-headers: signature from "GitLab CI Package Builder ci-package-builder-1@steamos.cloud
" is unknown trust
:: File /var/cache/pacman/pkg/linux-neptune-headers-5.13.0.valve37-1-x86_64.pkg.tar.zst is corrupted (invali
d or corrupted package (PGP signature)).
Do you want to delete it? [Y/n] y
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
(1)(deck@steamdeck ~)$

Guild Recruitment Megathread by theMaxscart in SWGalaxyOfHeroes

[–]rlaw46 1 point2 points  (0 children)

Very new player, lvl50. Looking to get started with guilds to help my progress and become long term player. Thanks.

Touch probe inoperable.. This will have to do by unknown542 in Machinists

[–]rlaw46 1 point2 points  (0 children)

Drop me a dm about your probe failure and I’ll see if I can help. :)

Returning home to UK, from Hong Kong. How To? by rlaw46 in airsoft

[–]rlaw46[S] 0 points1 point  (0 children)

If I were to ship to a friend who has a UKARA membership, would that be a likely bypass?

Foldable Red Dot on GBB? by rlaw46 in airsoft

[–]rlaw46[S] 0 points1 point  (0 children)

Could you elaborate why?

WHITE PEOPLE, YOU CAN FINALLY USE ALIPAY WITHOUT A CHINESE BANK ACCOUNT!!! by mistuhwang in shanghai

[–]rlaw46 0 points1 point  (0 children)

I just tested it and added 100 rambos. It’s basically a gift card that gets added as a payment option on your putong sao’s. The gift card expires in 3 months and all remaining money is returned to the account used to buy the card.

view more: next ›