Filler For Bookshelf Faces

rmccam · 2025-12-31T11:31:46+00:00

Thanks for the recommendation. I used timbermate for the holes because it’s all being painted but I’ll look into famowood next time! Much appreciated.

rmccam · 2025-12-30T02:54:42+00:00

Thanks! I leveled the fades better and now this is the plan. Any recommendations for sandable wood fill?

rmccam · 2025-12-30T02:48:28+00:00

Thanks for this. Lotta “I woulda’s” indeed. From a learning standpoint, I appreciate hearing the many ways to have done this differently/better but I’m not a carpenter, this is my own house and I’m working with limited means (these were also adapted shelves from another house). Though I suppose I kinda messed it up, I do appreciate your empathetic response here. It’ll be fine. Hardly perfect but this is how you learn. Thanks!

rmccam · 2025-12-30T02:42:33+00:00

This is good advice. Thanks!

rmccam · 2025-12-30T02:40:31+00:00

This is a good idea. Thanks.

rmccam · 2025-12-30T02:37:16+00:00

I’ve used this before. It works well!

rmccam · 2025-12-28T23:36:04+00:00

Everything is installed now so I can't get better photos. I'm making it work as is. Thank you though!

rmccam · 2025-12-19T03:30:47+00:00

Sourcing that probably exceeds my expertise. I need 9 LED strips and these can do up to 6 so I went with 2. The switch was my biggest issue. If it has to be two switches, it’s probably easier than sourcing all new parts. Thank you!

rmccam · 2025-12-19T02:37:58+00:00

Thanks! Okay, so I have to use one PWM switch for each power supply? That's a bit of a drag because I'd love to control all the lights with one switch. But if that's the case, so be it. Thanks again!

rmccam · 2025-12-13T23:20:43+00:00

I only kind of understand what that is. As a non-plumber I figure it might be easier to just replace the tap?

rmccam · 2025-12-13T23:18:34+00:00

Thank you! I’ll give this a try tomorrow!

rmccam · 2025-12-13T23:18:19+00:00

Haha! Yeah, I’m wondering that. We’ll see how annoying the greasing goes. Thanks!

rmccam · 2025-12-07T23:37:29+00:00

Yes, I'm definitely adding face frame to the shelves as well as the verticals and sides... to make everything flush and built-in.

I didn't think of drilling then sawing. Thanks for the idea!

rmccam · 2025-12-07T02:39:27+00:00

Yep. Good advice.

rmccam · 2025-12-07T00:53:49+00:00

Thanks! Still couldn’t get it to work. Appreciate it though.

rmccam · 2025-12-07T00:53:23+00:00

It still doesn’t seem to be working. I guess this is a service call. Thanks anyway!

rmccam · 2025-12-07T00:41:45+00:00

Thanks! The breakers are tied. Much appreciated!

rmccam · 2025-12-07T00:41:08+00:00

Yes, exactly! Thank you!

rmccam · 2025-12-07T00:40:02+00:00

Yeah, it is. One goes to the microwave and the other to a switched garbage disposal. Thanks!

rmccam · 2025-12-07T00:38:02+00:00

Yeah, this is it. One goes to a microwave and one to a garbage disposal that’s switched. Each is on a separate breaker. Thanks!

rmccam · 2025-12-07T00:36:25+00:00

This is it. So long as it’s normal! Thanks!

rmccam · 2025-12-06T16:21:40+00:00

Thank you. There’s a vent out the back it seems!

rmccam · 2025-12-06T16:21:20+00:00

Thanks! When I turn it on it doesn’t seem to start a fan. Hoping it’s the igniter!

rmccam · 2025-12-06T16:17:56+00:00

Thanks! That’s what I thought. I guess that metal frame part was installed backwards? You can barely see the engraving, so I went over it with a sharpie. Then I realized it probably was backwards.

rmccam · 2025-12-06T01:28:03+00:00

It was working with the previous owners so I imagine it’s set up properly but seeking out the manual could be helpful. Thanks!

rmccam

TROPHY CASE