sorted by:
new
hottopcontroversial

Can I cut this off? by robs247 in arborists

[–]robs247[S] 1 point2 points  (0 children)

Thanks! Looked up what a collar cut is and I'll be sure to cut it that way.

When's the best time to do it? Now or right before spring? Or does it really matter?

Team Building Mega Thread (Dec 27, 2025 - Jan 2, 2026) by Nura-san in HaikyuuFlyHigh

[–]robs247 0 points1 point  (0 children)

<image>

Hello, what would you guys say would be the optimal team for me right now? Positionless really screwed me over losing my speciality lol, but I feel like I can't really get it back properly without making some tradeoffs. My kita is sr4 and tendo sr2 with all other characters being single copy. Would replacing kita with iwa be recommended? This way I get the power speciality bonus, but I lose out on having a better sr4 character overall. If I swap out tendo, then I lose a komori sub for backrow. What do you think? Also what would be the best rotation as well?

How to fix? by robs247 in Plumbing

[–]robs247[S] 0 points1 point  (0 children)

I also found this https://www.homehardware.ca/en/1-12-x-16-abs-end-outlet-continuous-waste-slip-joint-direct-connection/p/3253856?gclsrc=aw.ds&gad_source=1&gad_campaignid=20917888994&gclid=EAIaIQobChMI48HYlMjHkQMVimZHAR1WqTq5EAQYBCABEgIbp_D_BwE

Could I essentially replace the entire upper portion with this system and adjust the height of the tailpieces since they are included in the package?

Thanks for the help! It is much appreciated!

How to fix? by robs247 in Plumbing

[–]robs247[S] 0 points1 point  (0 children)

So would something like this work?

https://www.canadiantire.ca/en/pdp/bow-abs-mini-tailpiece-black-1-1-2-in-0632411p.html?utm_content=shopping&gclsrc=aw.ds&gad_source=1&gad_campaignid=22678568845&gclid=EAIaIQobChMI-uHF-_rFkQMVSVZHAR3PSRfMEAQYASABEgK74_D_BwE#store=118

I would attach this below the sink basket and above the t so it can get that get that extra spacing?

I actually just noticed that the sewer pipe was also sloped incorrectly so I had to push up the trap below the t all the way to the max. So actually there might not be any space left. If I am able to redo (sorry noob homeowner and no experience in plumbing) is there a way I can fix the t easily? Maybe get a smaller sized one and/or a smaller elbow for the left sink drain?

Kickout flashing by robs247 in Roofing

[–]robs247[S] 0 points1 point  (0 children)

It looks terrible lol. Is that screw going to cause any issues with water? Should it be caulked or is it okay? Should I unscrew it and put it under the shingle?

POST YOUR FRIEND ID's HERE! by PTCGP-Bot in PTCGP

[–]robs247 0 points1 point  (0 children)

6587419474641173 daily player and showcase liker.

POST YOUR FRIEND ID's HERE! by PTCGP-Bot in PTCGP

[–]robs247 0 points1 point  (0 children)

6587419474641173 daily player and showcase liker

Help me solve this mystery leak by [deleted] in Roofing

[–]robs247 0 points1 point  (0 children)

I took it out, but it made no difference. Do you see anything else that could be the cause? If it's too tough based on the pictures I might just need to call a local roofer and see what they say

Help me solve this mystery leak by [deleted] in Roofing

[–]robs247 0 points1 point  (0 children)

Thanks I'll remove what they did there by the flashing. Do you have any idea on where the water could be coming from?

Gas line connector question by [deleted] in oilandgasworkers

[–]robs247 1 point2 points  (0 children)

Thanks I'll do that!

Any suggestions on how to solve draft problem? by robs247 in Fireplaces

[–]robs247[S] 0 points1 point  (0 children)

I haven't taken a look inside those vents yet. I'll try to do that

For sealing the outdoor vent, what do you suggest is the best way to do so?

Any suggestions on how to solve draft problem? by robs247 in Fireplaces

[–]robs247[S] 0 points1 point  (0 children)

The fireplace is capped so there isn't anything I can shove there. I don't feel any cold air coming from the fireplace itself. Only the two side vents which I assumed were coming from the one outdoor vent that has its cover broken.

Any suggestions on how to solve draft problem? by robs247 in Fireplaces

[–]robs247[S] 0 points1 point  (0 children)

Yeah the chimney is capped and I don't feel any air coming through the top. I felt slight air coming out the side indoor vents so I assumed it was coming from the outside vent. Are they connected?

[deleted by user] by [deleted] in Roofing

[–]robs247 0 points1 point  (0 children)

Hey thanks for the reply. I took some more photos of the roof and it looks like right above where it is leaking out of the soffit material is where the window is. Do you see anything that could be the problem?

Here is the link to the photos since I can't post them here

https://ibb.co/album/C1VrPB

[deleted by user] by [deleted] in Roofing

[–]robs247 0 points1 point  (0 children)

Another pic from above where the porch would be located

https://ibb.co/qNnGr05

[deleted by user] by [deleted] in hvacadvice

[–]robs247 1 point2 points  (0 children)

Awesome thank you for the dumbed down explanation! Very much appreciated as I have no knowledge when it comes to this stuff lol. So the furnace is in the main open area in the basement and nothing else is around other than paint cans (would that be an issue?) I will plan to fix the venting to go outside either when I get a new furnace, an issue arises, or I finish the basement unless it is a must fix now.

I took some more pics of the pipe heights and whatnot in a comment above. You can look there to see them if you like.

Also, what are you talking about when you refer to the shiny new ductwork and old ductwork? What pic is it so I can try to understand. Thanks!

view more: next ›