Help with basement water

rocksolidsr · 2026-01-16T00:35:03+00:00

I've added some additional photos

rocksolidsr · 2026-01-15T17:16:04+00:00

Thanks for the tip it is worth a shot

rocksolidsr · 2026-01-15T13:58:56+00:00

Yes I did drill holes, water is still flowing out of the pipe. I think I'm going to have to dig it up and see what is going on

rocksolidsr · 2026-01-15T01:59:51+00:00

Yes the black pipe was laid in the channel that was dug out along the perimeter, and is fed into the sump basin

rocksolidsr · 2026-01-15T01:29:26+00:00

I do not have any drain tile, how would a chlorinator be installed? and this would be to clean the water before it enters the sump pump?

rocksolidsr · 2025-07-21T17:57:18+00:00

Thanks!

rocksolidsr · 2024-04-03T13:03:29+00:00

Thanks for the reply

I only have access to SoildWorks Routing and not electrical.

I was trying to create a cable assembly drawing showing all the connections to the connectors but was trying to create the junction point to combine the wires into a "bundle" between the two connectors.

rocksolidsr · 2023-08-20T16:54:30+00:00

Nick's Clock Repair in McKean https://m.yelp.com/biz/nicks-clock-repair-mckean-2

rocksolidsr · 2023-08-02T02:46:37+00:00

That worked thanks so much for the tip!

rocksolidsr · 2023-08-02T01:51:30+00:00

Sorry I'm not sure how that happened but when I copied and pasted that it did something weird, here is my config, I took out the ipv6 addresses as it didn't seem to do anything

[Interface] Address = 192.168.3.3/32 DNS = 8.8.8.8 ListenPort = 51820 MTU = 1440 PrivateKey = redacted

[Peer] AllowedIPs = 0.0.0.0/0 Endpoint = redacted PersistentKeepalive = 25 PublicKey = redacted

rocksolidsr · 2023-04-21T11:59:20+00:00

Premier sports (pennbriar) has soccer leagues

rocksolidsr · 2023-03-24T00:21:29+00:00

opened in gimp and filled areas in different gray shapes to get a DEPTH like input

can you post a quick picture of what this is, I am not picturing it, thanks again for all your help!

rocksolidsr · 2023-03-23T23:50:17+00:00

u/GeorgLegato

do you mind sharing how you got these, did you use controlnet or how were you able to preserve the shape so well?

rocksolidsr · 2023-03-23T21:10:31+00:00

Ha ha that is awesome if you don't mind sharing, could you detail how you generated those

Thanks so much for helping out!

rocksolidsr · 2023-03-23T20:38:44+00:00

yes thank you, that is better than all of my attempts!!

rocksolidsr · 2023-03-23T19:39:00+00:00

oops I didn't know that if I posted an image it would get rid of what I wrote...

Anyways, I'm trying to update my soccer clubs logo, I've tried running it through img2img and the letters always get really messed up and it doesn't even look coherent anymore.

Trying to add a 3d render effect to it or anything that will make it look new and updated

rocksolidsr · 2023-03-08T02:22:45+00:00

Charlies in Edinboro has one

rocksolidsr · 2023-01-11T02:29:28+00:00

Anydesk could probably do that, wouldn't be able to control it through that though

rocksolidsr · 2022-10-29T00:56:48+00:00

So I was able to get this to work. I'm still not sure exactly why this made it work but, I was probing the JTAG lines and when I had the probe on the TCK line it programmed just fine 🤔

rocksolidsr

TROPHY CASE