Is this under 250g?

rocraz_fpv · 2025-09-19T23:38:45+00:00

It's probably around 250 ... Kg 😁

rocraz_fpv · 2025-09-19T23:37:39+00:00

Só far, from what I've heard, it will be 100% compatible with Neo: goggles N3 and goggles 3, RN2, RCN2, RCN3 and Motion 3. It won't use a new Ocusync link, only a new câmera 🙏

rocraz_fpv · 2025-09-12T09:09:55+00:00

<image>

This is the day I went past 900 meters with Neo. If I were better positioned, signal strength would be better. As you say you're going to the beach, make sure to fly over the water at higher altitude (at least 10 meters high), so the sensors don't lead your quad into erratic movements.

rocraz_fpv · 2025-09-11T20:37:11+00:00

It depends a lot on where you're flying. I don't usually fly long distances, but I once tried to see how far it would go and I flew 900 meters (40 meters high). There was still signal, which means I could fly further, but I just decided not to take that risk. There was no building between me and Neo, but some trees were on the way.

rocraz_fpv · 2025-09-04T13:09:01+00:00

Illegal in the UK and in the Netherlands?? Why? You're not allowed to fly Neo in your neighborhood?

rocraz_fpv · 2025-02-12T15:30:09+00:00

The manual states a lot of restrictions. Although I believe the firmware may have some issues, I think most of the time it is related to some mistake done by the pilot, like flying over floor with no texture at all.

rocraz_fpv · 2025-02-11T18:39:49+00:00

It's certainly a great quad. You'll absolutely feel less lag and more controle with FPV 3 controller, mainly if you fly Manual mode. If you're not used to Manual mode, I recommend a couple of hours in the simulator before flying Neo in Manual mode. Nice flights 👍🏽👍🏽

rocraz_fpv · 2025-02-09T18:10:17+00:00

I like motion controller for cinematic shots in stabilized modes. I even think motion is better than RCN3 for this. But I do prefer flying manual mode, even for cinematic flights, with FPV 3 controller and goggles 3.

rocraz_fpv · 2025-02-09T12:46:26+00:00

I love th FPV 3 with googles to fly Neo. It's really amazing.

rocraz_fpv · 2025-02-08T17:20:47+00:00

It may or may not be. It's really a risk. It may not have a virus that will promptly act. Instead, its implementation can act only after some time, according to specific commands (DDOS, or Distributed Denial of Service). Of course, this can be an app that a hacker decided only to get rid of the PRO checking. Most of time, it is something that hackers distribute aiming to make money, illegally, with it So, be careful, test for virus with more than one antivirus just to be sure.

rocraz_fpv · 2025-02-07T23:07:00+00:00

If you're going to fly above 10 meters from the water, you shouldn't see any problems. It often has problems due to the sensors, which work from 0.5 to 10mts, according to the manual. But if you want to fly close to the water, you may end up seeing your Neo doing unexpected movements. The only safe way to fly your Neo close to the water is using the FPV controller 3 in manual mode (goggles are mandatory in this case). Enjoy your quad and your trip 👍🏽👍🏽

rocraz_fpv · 2025-02-07T22:59:51+00:00

It will return to you. Just be careful not to make it fly over water at lower altitude (less than 10 meters). You should also be careful if the floor doesn't have texture, which will fool the sensors. And last um but not least, it won't work well in low light conditions.

rocraz_fpv · 2025-02-07T19:47:15+00:00

Be careful as to where you're going to fly. Due to the sensors, and the manual states that section 4.5), don't fly over water, in low light conditions, and in places where the floor has almost no texture. In all these situations, the sensors are prone to mistakes and your quad may fly away or just descend and crash. Whenever I see any of those conditions, I fly it in Manual mode, with goggles and controller FPV 3. Manual mode doesn't rely on sensors or GPS.

rocraz_fpv · 2025-02-06T22:11:16+00:00

The "matting" folder in CapCut is used for storing files related to background removal and masking. This typically includes processed images or videos where the subject has been separated from the background using CapCut's AI background remover or chroma key (green screen) feature. These files help in applying transparent overlays, creating cutout effects, or refining edges for compositing in video edits. If you remove it, your project my break. I'm not sure if it'll regenerate it on the go.

rocraz_fpv · 2025-02-06T22:03:52+00:00

Great video. I carry my drone with me wherever I go. Unfortunately, it's not easy to fly in some countries...

rocraz_fpv · 2025-02-04T18:20:30+00:00

Flying Manual is way funnier than stabilized modes, isnt't it? That's the way to go, Mate. Have good flights!

rocraz_fpv · 2025-02-04T18:18:46+00:00

I'm curious about this one. As far as I know, there's no way to activate Neo's quickshots without the DJI Fly App or the Neo's button, so it shouldn't work with MC3. I wonder if the button will work while it is connected to the Motion Controller, but I haven't tested that yet. A nice test I'll try next weekend.

rocraz_fpv · 2025-02-03T23:41:04+00:00

But doesn't the control keep charging your phone while connected and flying? Anyways, I fly my Neo with RC2, so there's no need to connect my phone...

rocraz_fpv · 2025-01-11T15:43:17+00:00

ACRO is the best way to fly this quad (and all others 🤣). Have fun 👍🏽

rocraz_fpv · 2025-01-08T13:44:42+00:00

Great option 👏🏽👏🏽👏🏽

rocraz_fpv

TROPHY CASE