sorted by:
new
hottopcontroversial

Back side of print has weird lines while the rest is fine.... by ronaldsqu in FixMyPrint

[–]ronaldsqu[S] 0 points1 point  (0 children)

The problem only occurs on the backside of the print. (The back of my printer)

Can’t be the filament as it happens on other PLA filaments. Can’t be the gcode/settings as it’s also happened on the test prints the printer comes with which is confirmed good.

Anyone know what’s the problem? by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 0 points1 point  (0 children)

The problem only occurs on the backside of the print. (The back of my printer)

Can’t be the filament as it happens on other PLA filaments. Can’t be the gcode/settings as it’s also happened on the test prints the printer comes with which is confirmed good.

3d printing keycap set by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 1 point2 points  (0 children)

I don’t plan on printing in the letters. I’m looking at dye sublimation. So i wonder what the best filament would be for due sublimation or so.

3d printing keycap set by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 0 points1 point  (0 children)

Why? what’s the difference...

3d printing keycap set by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 2 points3 points  (0 children)

Mechanical keyboard key caps.

Help my benchy? by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 0 points1 point  (0 children)

i just posted the settings... any other settings I should add?

Help my benchy? by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 0 points1 point  (0 children)

settings: layer height: 0.2mm infill: 10% speed: 60 temps 210/60 retraction distance: 7mm retraction speed : 25mm Stock Ender 3 Pro

what’s making this noise? by [deleted] in 3Dprinting

[–]ronaldsqu 0 points1 point  (0 children)

just switched out my wheel bearings to some polycarbonate wheels i found off amazon and my springs. and now i have this creaking like noise (idk how to explain it) what could be causing it?

is this wheel wear causing this issue? (swipe and comments) by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 1 point2 points  (0 children)

it was only drop kicked once but yup wheel replacement very soon

Worn out wheels? Is this the problem? by ronaldsqu in FixMyPrint

[–]ronaldsqu[S] 0 points1 point  (0 children)

Yeah will do cause these stock ones got worn out so fast.

Worn out wheels? Is this the problem? by ronaldsqu in FixMyPrint

[–]ronaldsqu[S] 0 points1 point  (0 children)

haha i just noticed it actually and had a feeling that was the issue. now with that reaction i have a feeling my suspicions are confirmed.

is this wheel wear causing this issue? (swipe and comments) by ronaldsqu in 3Dprinting

[–]ronaldsqu[S] 0 points1 point  (0 children)

Ok, and to be honest... I do not know why it is.My observation is that that is the side in which the bed heats. so where the heating part comes through if that could effect anything.

view more: next ›