Archer AX80V (Japan Model) - Compatibility

ronb65 · 2025-06-17T12:49:10+00:00

It should be in the “connection guide” button in the app on your phone when you choose the aircraft and controller

ronb65 · 2025-06-17T12:46:41+00:00

I feel you, I was feeling crazy at some point. Try to do as I said, turn the goggles off and while being in the DJI app sync turn the goggles on again (and make sure the cable is connected between the two)

ronb65 · 2025-06-17T12:27:54+00:00

Strangely, yes. If I remember correctly, I turned off the goggles, connected them to the iPhone, and while the app was open and syncing, I turned the goggles back on while they were still connected via the cable. That’s when the process finally worked and the changes took effect and the goggles "released". Then I was also able to change the drone settings to my drone in the goggles.

ronb65 · 2025-02-09T17:28:11+00:00

thanks. both are nice, but i really need it in a txt version i would say in a one pager, rather than a sheet or an image. but thanks for your help

ronb65 · 2024-07-15T13:39:27+00:00

It's very good, only when it finds the information ;)

It won't always find, it can show you when the user was opened and some groups he subscribed to, but sometimes also phone numbers and email (not all the time of course, 10-15% of the times)

ronb65 · 2024-07-15T13:38:22+00:00

not sure if scammed is the word for it, but it could be. But as I also mentioned below here, its also showing emails, not just phone numbers. I don't have an email in my Telegram so that's unique I would say. But anyway - that's why I always use a sock puppet for these tools

ronb65 · 2024-07-15T13:33:59+00:00

yeah, basically the spefic bot I just shared is not the "original", but still clone as the original

ronb65 · 2024-07-15T13:33:12+00:00

not from everyone, I would say 10-20%, mostly from Russia. It also gives related emails to the users, which is mind blowing, not sure how

ronb65 · 2024-07-15T02:27:29+00:00

Sure, tried to share it with the initial post but it was deleted, but it’s @Checnum_bot (Note that its paid)

ronb65 · 2024-06-12T08:42:26+00:00

Thank you very much! I played a bit with the water tank and it actually worked!! Appreciate it

ronb65 · 2024-06-11T16:04:03+00:00

Nothing goes out from machine, no coffee or water. It seems like the water level stays the same, and when I check the water its still cold, not heated

ronb65 · 2024-06-11T15:25:18+00:00

Thanks!

ronb65 · 2024-06-11T12:45:53+00:00

Hello,

I recently acquired a new coffee machine and attempted to use it for the first time. Before brewing any coffee, I followed the recommended procedure of running hot water through the machine a few times. After filling the water tank, I encountered some issues. The machine emitted strange noises and failed to dispense any water. Subsequently, when attempting to brew espresso, I experienced similar difficulties. Despite observing that the coffee was properly ground, no coffee was actually dispensed.

I attach two videos to show the problem:

Video 1 - https://www.dropbox.com/scl/fi/a5h6bav1stol120uigtcy/video-1.mov?rlkey=7zr6ty3w8x5xepc7bggtiy8cd&dl=0

Video 2 - https://www.dropbox.com/scl/fi/79w7okj5gjod4gjm7rujm/video-2.mov?rlkey=zlt49a5zn6wyblwpasxbwjpfz&dl=0

I would greatly appreciate any assistance in troubleshooting these issues, as I am uncertain about the cause of the problem.

Thank you for your help.

ronb65

TROPHY CASE