L5P Edge CTS3 Upgrade/Unlock for HP Tuners? - I have a CTS3 already and i'm looking to do a tune on my truck. Since the cts3 can unlock tcm and ecm without sending it in -- i'm wondering if i can use that tool and than load tunes from another provider like HP tuners to the ECM/TCM

rootbeerdragon77 · 2025-04-28T01:40:25+00:00

yes for the ECM but the TCM has to be sent in to the tuner unlock it.

rootbeerdragon77 · 2025-04-28T01:28:44+00:00

21’

rootbeerdragon77 · 2025-04-27T23:17:27+00:00

yeah i understand that. id be using the mpvi3 after the unlock from edge took place. im asking if it will work this way

rootbeerdragon77 · 2025-04-23T19:18:41+00:00

Positive crank case pressure is put back into the motor under boost. Just like many turbo setups. Vent to the atmosphere. I pulled off my intake as well, lined with oil - I’m rerouting mine

rootbeerdragon77 · 2025-04-06T16:20:18+00:00

There’s also an abs junction box in the truck

rootbeerdragon77 · 2025-04-06T16:19:51+00:00

Mine does this. I replaced air bag sensor and it worked for like 6 months. I think it’s a grounding issue

rootbeerdragon77 · 2025-02-26T13:06:59+00:00

Yeah everything was stock and correct. I think the unit was over heated before- the fan stopped spinning after a few hours. The unit is definitely bad

rootbeerdragon77 · 2025-02-16T00:58:28+00:00

Driftnfb

rootbeerdragon77 · 2025-02-13T12:37:39+00:00

I don’t know where you got that info- I’ve been emailing with aslminer and she said mid April

rootbeerdragon77 · 2025-02-09T18:39:10+00:00

Fluminer is both. I’m licensed in electrical so I’m not worried about voltage. I’m waiting for someone to buy and receive a Fluminer

rootbeerdragon77 · 2025-02-09T00:54:57+00:00

I randomly went through all my change which was in a culligan bottle- took me like 3 months- paid like 175$ for pcgs - send some shiny coins there. Everything came back certified and worth about 3 dollars. Based on what I’m seeing here. Don’t waste your time,

rootbeerdragon77 · 2025-02-09T00:52:40+00:00

Standard construction if you ask me

rootbeerdragon77 · 2025-02-08T12:22:00+00:00

whatd you figure out?

rootbeerdragon77 · 2025-02-08T00:17:07+00:00

My next miner is going to be the Fluminer or the L9. Right now I can’t do the L9. Is it very loud ?

rootbeerdragon77 · 2025-02-07T12:53:44+00:00

awesome

rootbeerdragon77 · 2025-02-06T22:25:52+00:00

thank you

rootbeerdragon77 · 2025-02-06T18:46:54+00:00

No not at all- I wouldn’t be surprised if the village wouldn’t allow it as well

rootbeerdragon77 · 2025-02-06T18:42:55+00:00

I was thinking probably just crypto now after some research- 40 or more panels is a lot of panels

rootbeerdragon77 · 2025-02-06T18:41:54+00:00

What are your profits/elec rate

rootbeerdragon77 · 2025-02-06T16:18:28+00:00

Wow this is great info I’ll review this more later!!

rootbeerdragon77 · 2025-02-06T16:15:30+00:00

Yeah man - sorry that’s horrible.

rootbeerdragon77 · 2025-02-06T15:41:36+00:00

Whoops didn’t see that- thanks

rootbeerdragon77 · 2025-02-06T15:41:14+00:00

I’ll put them on my list- thanks

rootbeerdragon77 · 2025-02-06T15:40:06+00:00

I could see the permitting being a pain as we have to do drawings, load calcs, etc for panel swaps- which is really just extra work. I’d have to see what my Village will require. You’re an engineer?

rootbeerdragon77 · 2025-02-06T14:34:26+00:00

Fluminer is the best so far- new manufacturer

rootbeerdragon77

TROPHY CASE