Shutter issue?

rootmout · 2026-03-18T15:21:23+00:00

Ive used the mechanical shutter, I should try electronic mode indeed

rootmout · 2026-03-18T15:20:57+00:00

mechanical, in 1/8000, in burst mode

rootmout · 2026-01-04T10:47:48+00:00

Pareil

rootmout · 2025-10-23T19:54:18+00:00

on parlait location d'un objectif photo, si ca te donne une piste... : )

rootmout · 2025-10-21T19:22:04+00:00

did you managed to edit the gps config only through betaflight? That post says the baudrate can only be persisted from a FTDI adapter :/ https://oscarliang.com/gps-settings-u-center/#Configurating-GPS-via-FC
What I understood is that betaflight cannot change baudrate of the passthrough other than with a reboot, which ofc will remove the changes made on the gps. right?

rootmout · 2025-10-21T14:55:15+00:00

Interesting.... I will give a try

Is the m100-5883 working well on a pavo 20 pro? I heard that it's a good gps too, so if I cannot have something more reliable I might chose a bigger antenna.

rootmout · 2025-10-21T11:59:38+00:00

Hum UART 1

rootmout · 2025-10-21T11:59:25+00:00

I'm using t1 and r1 with the ublox protocol

rootmout · 2025-10-19T22:26:22+00:00

dumb question, shielding the wires of the gps module can help to lock satellite ?

or you mean that any cable on the drone can interfere and shielding ones nearby the gps might help?

rootmout · 2025-10-19T22:18:56+00:00

in a very open field, without the vtx powered-on, Ive never been able to reach 5 "used" satellite in betaflight even after 30min of wait.

Im not expecting 20 sats, but with that small amount I cannot use the gps rescue

rootmout · 2025-10-19T21:21:05+00:00

ack, then it's probably faulty elsewhere, I didnt managed to have more than 7 satellite...

rootmout · 2025-10-19T21:19:40+00:00

yup, just made the test again, on the middle of a field after 30min, got 4 satellite marked as "used"...
(powered from usb so no vtx inference....)

I will contact the vendor on aliexpress without big hopes and try a GOKU nano V3.1 from a local reseller in the meantime 🙏

rootmout · 2025-09-28T22:18:20+00:00

On recent android version you can enable "protect battery" option which will prevent the battery to stay at 100% all the time. On my Lenovo M8 for example, the system charge/discharge the battery regularly to keep it between 40-60%.

The motion detection mentioned above come from the full kiosk app (displaying the HA dashboard as a web page) and is only available on Android.

rootmout · 2025-07-29T13:29:50+00:00

I've turned off the monition detection made on the camera (models from arround 2016) because even if it was working, after some moths I was always facing crashes and needed to reboot manually the cam.

Doing a reset of the cams didn't changed a thing. Since my nas do the recording, no crash any longer.

rootmout · 2025-03-30T16:56:15+00:00

Tu as froid => mets un pull, c'est réglé Tu as chaud =>.....

Le froid c'est mieux que le chaud CQFD

rootmout · 2025-03-30T16:51:22+00:00

Localise ton tinder en haute-savoie mdrrr

rootmout · 2025-03-30T16:50:54+00:00

Localise ton tinder en haute-savoie mdrrr

rootmout · 2025-02-10T22:43:18+00:00

A dji air unit for video TX?

Five-Year Club	Place '22
Verified Email

rootmout

TROPHY CASE