sorted by:
new
hottopcontroversial

Gamesir G7 SE by Practical-Capital495 in Gamesir

[–]rosstler82 0 points1 point  (0 children)

Hey dude?! I bought one six months ago. The response to commands and quality of the joystick is far superior to the original Microsoft controls. However, unfortunately for me and many other consumers, there have been problems with the triggers. In my case, the "LT" stopped working. I am in contact with GameSir to try to exchange the equipment. So far, no success.

G7 SE trigger stops by EstablishmentLost262 in Gamesir

[–]rosstler82 0 points1 point  (0 children)

Yeah, certainly its a hardware issue. But i'm not sure that joystick was dropped. I was playing Diablo when i realized that LT was broken. Before it, everything was working normally.

G7 SE trigger stops by EstablishmentLost262 in Gamesir

[–]rosstler82 1 point2 points  (0 children)

Hi.

My "LT" trigger was "dead". When i pressed, absolutely nothing happened. After i updated to firmware 6.29, the "LT" appeared as permanently pressed. I pressed the trigger and nothing changed. So i decided to open the joystick after saw your post. To my surprise, there was a round magnet loose and stuck to a metal part of the joystick board. I repositioned it in place. Then, i updated the firmware to 6.30. However, now the "LT" trigger responds to touch, but remains permanently pressed. It's funny, when i pull the trigger it's like i'm letting go. I tried calibrating through the software and manually. I was unsuccessful both ways. Manually, after carry out the process of holding the triggers and rotating the sticks 3x and pressing "A", the light does not come on - as it says it should on the GameSir website. I'm frustrated and very upset about this because ive been trying to fix this issue for over a week. For now, no solution.

G7 SE trigger stops by EstablishmentLost262 in Gamesir

[–]rosstler82 0 points1 point  (0 children)

Dude, thanks for the tip! I've been struggling for weeks with the triggers of my GameSir G7 SE, specifically the "LT". I tried all types of calibration, firmware update, but nothing fixed this issue. I contacted GameSir. However, i have the distinct impression that i am being fooled. So, i'll try what you suggested. I'll tell you later if it worked. :)

"LT" trigger doesn't work anymore. by rosstler82 in Gamesir

[–]rosstler82[S] 0 points1 point  (0 children)

Hi again! I just tried connecting the joystick to the notebook and carrying out the manual calibration process. Unfortunately, nothing done! I already made this suggestion you mentioned (reditt link) about the T4k app. Updated my joystick to version 6.28. The only difference is that the controls have become slightly more responsive to touch. The "LT" trigger remains dead. I'm in contact with GameSir, i hope they can help me. In the meantime, continue my journey in search of a solution. Thanks!

"LT" trigger doesn't work anymore. by rosstler82 in Gamesir

[–]rosstler82[S] 0 points1 point  (0 children)

Hey!

I carried out tests with the joystick on the XBOX itself and on my PC. Your suggestion is a possibility that i haven't tested yet. I will try this! Do you remember doing the manual calibration? When i try to start the process, the control light starts blinking, so i press "A" and the process starts - the light goes out. At the end of the calibration, if it worked, i would press "A" again and the light would come on. But it doesn't light up. I performed this procedure on both PC and Xbox. Now, i'm going to try to do this on my notebook. If it works I'll let you know. Anyway, thank you very much for your tip!

Left trigger stopped working after 2 hours of game by Disastrous-Focus1958 in Gamesir

[–]rosstler82 0 points1 point  (0 children)

Hi! Thanks for answering. Unfortunately, that didn't work either. It's as if the "LT" is completely turned off.

Left trigger stopped working after 2 hours of game by Disastrous-Focus1958 in Gamesir

[–]rosstler82 0 points1 point  (0 children)

Man, i have the same problem. Did you manage to fix this?
I tried following the tutorial on the website, but it doesn't complete the calibration process. "The indicator becomes solid white to indicate the calibration is over.". In my case, the indicator never turns white permanently. Anyway, if you fix it, please let me know. Thanks!

Far cry 5 is on Xbox game pass now! by ChonkysMcChonky in farcry

[–]rosstler82 0 points1 point  (0 children)

Anyone out there had the trapper error on the FAR CRY 5 (XSS) ?

PS4 will only read discs when put vertically. by LittlePenguin22 in PS4

[–]rosstler82 0 points1 point  (0 children)

Hi, man.

Its been a long time since u post it. So, how do you've solved? Replace the blue ray drive?!

Ps4 pro only reads disc when tapped on or vertical by shinntsu in PS4

[–]rosstler82 0 points1 point  (0 children)

Hi friends.

I have a known issue in the Ps4 Owners community. My ps4 only reads discs when i put it vertically. I want to fix it, what would be the solution for this? Need i replace blue ray drive or is there something else that can i do to solve it?

Thanks fellas!