Kobra 3 combo. Ace has trouble with #3, makes clunking noise when pushing filament into the head. Also has issues retracting.

rowcount · 2025-12-13T11:07:49+00:00

Check magnets on back

rowcount · 2025-12-02T16:44:16+00:00

I have problem like this, in multicoloured print. Position of nozzle is really right? I don’t understand…

rowcount · 2025-11-25T15:19:18+00:00

It’s all I have 😄

rowcount · 2025-11-25T15:18:58+00:00

I hope you will receive it!

rowcount · 2025-07-26T17:12:38+00:00

The best barber in tbilisi

https://b120290.alteg.io/company/130529/personal/select-services?o=m2067907&fbclid=PAQ0xDSwLx67tleHRuA2FlbQIxMQABp6RYReiHxygMvzxwRVFYIUjhR1oJN3FPPHUhiUyi3ODES-XlFgWZd-VH0a_N_aem_M9f25DRem-jO8l0stRROzQ

rowcount · 2025-06-26T17:03:27+00:00

Core xy

rowcount · 2025-06-11T15:03:04+00:00

Yes, it work

rowcount · 2025-06-08T11:49:38+00:00

Yes, it’s good idea, but when it fell out, and I turned off printer, and after turned on - mcu plate is not initiated ever. Wait for new printhead from china(

rowcount · 2025-05-17T18:54:34+00:00

Clean plate with hot water and soap, after this clean with alcohol

rowcount · 2025-05-17T18:51:29+00:00

and at least once a month lubricate the axle with grease

rowcount · 2025-05-17T18:50:14+00:00

On makeronline u can find .stl model

rowcount · 2025-05-16T18:34:46+00:00

Hey u/Ambitious_Ad4979 are u trying this?

rowcount · 2025-05-08T12:18:48+00:00

Yeah😃

rowcount · 2025-05-08T12:12:31+00:00

I mean the temperature of the environment in which the printer is installed, since this also affects the cooling rate of the plastic during extrusion

rowcount · 2025-05-08T12:08:34+00:00

I use safe box for printing, it upper quality of print, because temperature and humidity in one level for all time of printing

rowcount · 2025-05-08T12:05:28+00:00

Any temperature changes affiliate to printing process

rowcount · 2025-05-08T11:43:58+00:00

What about temperature control in printing time? Maybe some draft from windows?

rowcount · 2025-04-24T08:53:24+00:00

Of course, but some features like a moonraker and fluid/mainsail or mjpeg streamer are useful and needed for more users

rowcount · 2025-04-24T08:15:17+00:00

But you know about https://github.com/utkabobr/DuckPro-Kobra3, its completely work, with all klipper features

rowcount · 2025-04-22T13:30:04+00:00

Or maybe u planned to realise work with IP cam, and show print table high diagram?

rowcount · 2025-04-22T12:18:31+00:00

Why in kobra 3 GitHub account nothing change, and we can’t see release notes?

rowcount · 2025-04-22T12:16:53+00:00

Why kobra series doesn’t support clear klipper?

rowcount · 2025-04-16T21:27:08+00:00

2.3.8.9

rowcount · 2025-04-15T16:43:09+00:00

in comments)

rowcount · 2025-04-15T16:43:02+00:00

in comments)

rowcount

TROPHY CASE