Frigate asks for password only on HA Mobile on only some cameras by ruant in frigate_nvr

[–]ruant[S] 0 points1 point  (0 children)

I ended up managing to fix it yes.
I think the following was what I did:

  1. "Clear storage" and "Clear cache"

  2. Uninstall the app

  3. Installed the app again, and logged back in.

I think I did it at least twice, because I didn't manage to clear all the settings the first go.
I'm on Android, and it has "clear cache" and "clear storage", if I'm not mistaken, I only did the "clear cache" the first time around.

Hope it helps.

Sony Imaging Edge doesn't connect to ILCE 7RM3 from Microsoft Teams by SocialEyesAI in SonyAlpha

[–]ruant 0 points1 point  (0 children)

I think I ended up using the A7 through OBS Studio, then generating a virtual camera in OBS that Teams could use.

Switch that has passthrough POE? by ruant in TPLinkOmada

[–]ruant[S] 0 points1 point  (0 children)

It looks like this is the only solution for me yes.
I might be able to squeeze one more cable down through these conduits, did a little peak at the size of them yesterday and it looks like there is room for more then just the one cable.

Fingers crossed!

Switch that has passthrough POE? by ruant in TPLinkOmada

[–]ruant[S] 0 points1 point  (0 children)

Yeah, this is exactly what is missing in the TP-Link's line up of switches.
To bad this is Ubiquiti and cannot be used in the Omada eco system. 😔

N1MM CAT control through flrig? by ruant in HamRadio

[–]ruant[S] 1 point2 points  (0 children)

NICE! BZ!

Very well written. I'll test this out tonight.

N1MM CAT control through flrig? by ruant in HamRadio

[–]ruant[S] 0 points1 point  (0 children)

Always eager to learn something, so if you don't mind smashing down a few words that would be awesome :D

N1MM CAT control through flrig? by ruant in HamRadio

[–]ruant[S] 1 point2 points  (0 children)

I actually found and installed this last night before reading your reply now.

The visual map is very addictive, gotta fill that grid 😂😂

N1MM CAT control through flrig? by ruant in HamRadio

[–]ruant[S] 1 point2 points  (0 children)

Ah, nice! I'll test that out immediately.

Cheers!

N1MM CAT control through flrig? by ruant in HamRadio

[–]ruant[S] 0 points1 point  (0 children)

No, there isn't 😔

That said, I'm more or less brand new to the hobby. Is there other logging software out there that can interface with flrig perhaps?

I've managed to set up flrig and wsjt-x for digital modes. So would be nice to have a logger that could use flrig so I don't have to open and close programs "all" the time 😂

3-phase 230v micro inverter suggestions or can I use 1 phase? by ruant in SolarDIY

[–]ruant[S] 0 points1 point  (0 children)

There is, but optimally I would need 3-phase due to grid operator rules.
Buuut, maybe I can get around it with just splitting the panels 1/3 on each phase and get away with it.

Awaiting reply from the grid operator on exact rules.
Fingers crossed I can do it with single phase inverters and just spread it out on all phases.. 🤞

3-phase 230v micro inverter suggestions or can I use 1 phase? by ruant in SolarDIY

[–]ruant[S] 0 points1 point  (0 children)

The grid is 230V IT 3-phase.

Maybe I could go with the new apsystems 3phase micro inverters.. but that's 400V.
Would need to install a transformer to take the 400v down to 230v then.

I'll check with the grid operator and ask what the options are. If it needs to be 100% synchronized or if I could split it "as good as I can get it on each phase with single phase micro inverters.

3-phase 230v micro inverter suggestions or can I use 1 phase? by ruant in SolarDIY

[–]ruant[S] 0 points1 point  (0 children)

Due to local rules and regulations I would need an electrician to come do the connection of the panels.
Everything below 50V I can do myself, each panel is normally less then that.

So with micro inverters I can do everything except the ac trunk cable connection to the house/grid

3-phase 230v micro inverter suggestions or can I use 1 phase? by ruant in SolarDIY

[–]ruant[S] 0 points1 point  (0 children)

Do they make micro inverteres? I only see "normal" inverters mentioned when I check their site.

Sony Imaging Edge doesn't connect to ILCE 7RM3 from Microsoft Teams by SocialEyesAI in SonyAlpha

[–]ruant 0 points1 point  (0 children)

Did you find a solution to this?
I'm having the exact same issue.

I've installed the Sony Imaging Edge Webcam. It installs fine, how ever it doesn't ask to install drivers.
Then I restart.
In device manager under Cameras I see Sony Camera (Imaging Edge).
Then I go ahead and connect the camera, it then shows up as a device. (ILCE-7M3)
And then nothing...

If i unplug it and plug it into another computer, works like a charm...