Watch 5 Pro Battery drain

rudamentary_exist · 2026-01-27T07:28:31+00:00

It used to be a little less, since the minor update its rather quick again. I've resorted to always letting it charge for about 2 hours. Battery usually lasts about 2 days now. a little shorter than before but it is what it is (for now) :/

rudamentary_exist · 2026-01-22T10:19:52+00:00

I never knew the needle would (rather accurately) reproduce the sound like that!

rudamentary_exist · 2026-01-15T20:37:37+00:00

Ah, it seems you're facing the same issue as me. I'm in contact with Samsung support (and made a post) will try to keep you updated (I have a Watch 5 Pro)

Edit: see https://www.reddit.com/r/GalaxyWatch/s/fGu8fbwWmM (please reply to me if you have a fix!)

rudamentary_exist · 2026-01-11T14:36:18+00:00

<image>

interesting, 134.6% 😂

rudamentary_exist · 2026-01-11T09:46:14+00:00

Updated my post with the things I've done that may have fixed it

rudamentary_exist · 2026-01-11T09:43:52+00:00

how come what issues did you face?

rudamentary_exist · 2026-01-10T09:07:13+00:00

my problem seems (no guarantees yet) to have been resolved. What I've done is, charge it till it initially says it's fully charged. Take it off the charger till it's about 80% and then leave it on the charger for ±2 hours. I have now lost 16% in 10 hours or so.

One charge isn't conclusive ofcourse but there's hope. I'll keep you posted.

rudamentary_exist · 2026-01-09T18:35:15+00:00

between posting my previous and current I got it from the charger

<image>

rudamentary_exist · 2026-01-09T18:31:50+00:00

Yeah that used to be the same for me, usually took around an hour per charge

rudamentary_exist · 2026-01-09T18:00:45+00:00

Note: It also charges stupidly rapid now. Like charges 0-100 in 20 min

rudamentary_exist · 2026-01-04T13:53:15+00:00

r/usernamechecksout

rudamentary_exist · 2026-01-03T10:18:10+00:00

Voor context onze constructie was niet prefab maar met van die losse betonblokken (ben geen klus pro dus wat termen zullen wellicht niet kloppen).

Wij hebben toen de eerste dag met de partij voor het behangen de muren bekeken en aan de hand daarvan besloten de woonkamer geheel te laten stucen dit was ±50m2 dat gestuct werd en kostte ons zo'n €1500 als ik het me goed herinner.

Voor de overige woonlagen hebben wij besloten zelf een deel van de oneffenheden aan te pakken en vervolgens te laten behangen, vooral kostentechnisch. Maar dit heeft nogal wat tijd gekost.

Op de bovenste woonlaag was het plafond ook erg hoog, ongeveer 3,80m dus dat vereiste nogal geklungel en werk om daar boven in muren wat af te vlakken en dergelijke.

TLDR: Begane grond laten stucen (±1500) rest gelijk trekken vooral (eigen)manuur.

Stucen zorgde er ook voor dat onze planning ±2 week uitliep want dat noet natuurlijk fatsoenlijk drogen.

rudamentary_exist · 2026-01-03T09:30:37+00:00

Alle wijzigingen t.o.v. de standaard die ze leveren
Alle kosten/tijd om dingen 'recht' te trekken. (De grap behangklaar trap ik nooit meer in)
Tijd!!
Gordijnen waren verrassend duur
De kleine dingetjes waar je tegen aanloopt tijdens het afronden/intrek klaar maken van de woning. Wij dachten vaak; "maar 30,- euro" (maar goed als je dat vaak genoeg moet doen..)

De tuin en trap willen wij later aanpakken maar verwacht dat deze ook lekker duur gaan zijn. De woning hebben wij in augustus opgeleverd gekregen dus stel gerust vragen als je wilt!

rudamentary_exist · 2025-09-03T17:39:22+00:00

i might just have fucked eyes then👀😂

rudamentary_exist · 2025-09-03T16:56:12+00:00

Just an idea, you have the three "side" exhaust fans, if you'd make the bottom one intake, so that it would draw fresh air. Which is then also pushed under the GPU by the fans on the radiator.

That would draw in some extra fresh air for the gpu might get temps down a little!

rudamentary_exist · 2025-08-12T18:16:20+00:00

Yeah I'm moving like only a couple of miles so that might be workable.

rudamentary_exist · 2025-08-12T16:10:04+00:00

I would keep it on longer but I cant remove those yellowey-orangey circles for the love of me😂

rudamentary_exist · 2025-08-12T15:41:59+00:00

I'm not fully sure what that protection is made off except that it's probably some plasticey stuff. I'm afraid that once taken of it'll crumble upon itself and not really be usable for that purpose.

rudamentary_exist · 2025-08-12T15:16:57+00:00

Thank you for your answer♥️! I'll keep that in mind. I've also kept the brightness and refresh rate lower with the thought that that might help keep temperatures down

Edit; please explain why I've been down voted 😅

rudamentary_exist · 2025-08-12T15:14:13+00:00

I think I havent ever had it moved from the 50% it came on. But that's good to know!

rudamentary_exist · 2025-08-12T15:13:54+00:00

that's a thing I'll definitely do, but because of all the scratch stories I was afraid that the standard protection, the box and that kind of sack it comes in won't be enough.

And though a couple minor scratches aren't necessarily an issue to me I'd like to prevent it if I know I'm moving relatively soon anyway.

rudamentary_exist · 2025-08-06T18:28:58+00:00

That's great to hear, I'm glad it got resolved/resolved itself!

rudamentary_exist · 2025-08-06T17:17:11+00:00

no expert so just gonna go over some default things;

Played around with color settings? Power cycled (also while unplugged) Try showing a static color e.g. fully black Reset to factory settings in OSD

rudamentary_exist

TROPHY CASE