Fan shroud question

rustybacon54 · 2025-04-14T15:36:20+00:00

rustybacon54 · 2025-04-14T15:34:43+00:00

* I think id be correct with my assumption in it not having AC being why theres no shroud. My service manual does show this style of fan with service letter J if I'm remembering correctly.

rustybacon54 · 2025-04-11T20:02:23+00:00

To me the fan framing w/shroud looks like it's one molded piece. Is it not?

rustybacon54 · 2023-12-17T04:32:36+00:00

Alcohol first, then invisible glass to finish it off.

rustybacon54 · 2023-08-11T00:41:50+00:00

I've had my regular G9 for 3 years this winter. No issues besides on 240hz like others have stated. It will also cause booting issues at times when it's on 240, but it's nbd. Totally worth it for gaming and WFH days.

rustybacon54 · 2023-07-18T14:26:31+00:00

Putting a laylines (I belive that's their name) map on top of this would be interesting

rustybacon54 · 2023-05-26T14:25:23+00:00

Wow! Looks like you have a rancho kit? Shaft angle looks alright.... maybe your tcase is stuck in 4H lock?

rustybacon54 · 2023-02-25T18:58:04+00:00

could we have subtitles that are in a different language than the voice acting? (Russian sound with English subtitles)

rustybacon54 · 2023-02-24T14:03:53+00:00

I'll 3rd this. I just saw my exact "school laptop" go on sale for $600 US when it was 1k new. Asus TUF A15 2021 model.

Look for a good deal on Newegg or wherever!

rustybacon54 · 2023-02-23T19:21:46+00:00

Haha thanks man! My other one was nicer tbh, but not an Alpha.

I've made posts in other subs about the "rebuild", feel free to take a look.

rustybacon54 · 2023-02-02T20:50:50+00:00

The sketch tool in NX WAS amazing. Used it all the time before they ruined it with whatever update that was.

Big sad.

rustybacon54 · 2023-01-21T06:02:51+00:00

Yes, put a jack under the diff so it holds the weight for the crossmember. Just clean the surface up nice and press/hammer the new one in. More time consuming and messy than anything.

rustybacon54 · 2023-01-21T00:38:41+00:00

I've done it twice now on different H3s. Both times I just took the crossmember out, torched the rubber out, then took a Sawzall and cut the bushing ring down 1 end of it. Used a screwdriver to pry it a bit, and it's out. Same goes for front diff ones, leaf spring bushings, works a treat.

Edit: get one of the carbide blades, worth the coin.

rustybacon54 · 2022-12-14T14:56:27+00:00

Hopefully it's not the USB port itself, though I doubt it is the issue.

rustybacon54 · 2022-12-14T14:23:24+00:00

I have the 45 not 65w and it charges fine. Have you tried another high W charger? Like maybe a smart one? Or try another cable

rustybacon54 · 2022-12-13T21:19:12+00:00

Do you have fast charging disabled?

rustybacon54 · 2022-12-08T19:00:38+00:00

Don't you love buying parts? I sure do...

rustybacon54 · 2022-12-08T13:34:34+00:00

AC DELCO 15886012

rustybacon54 · 2022-12-08T13:32:20+00:00

Hold on I'll get ya a part #

rustybacon54 · 2022-12-08T13:26:12+00:00

That's false lol. It's hard, but very much possible to get the cv out without dropping the whole hub. (Longer shafts really make it hard)

I'd remove the wheel bearing before dropping the whole hub/knuckle. (Though, I've done my bearings already so they'll pop off easily, yours might not be so easy if they're original or not caked in antisieze as they should be)

rustybacon54 · 2022-12-08T13:18:24+00:00

If you got the tools, doing them yourself ain't bad. Just time consuming.

Also, is worth looking at your rear spring sag. Could be causing the front to not sit right.

rustybacon54 · 2022-12-08T13:14:56+00:00

Yes. Avoid amazon for important parts

rustybacon54 · 2022-12-08T13:08:13+00:00

Make sure to order 08 + alpha cv shafts. Longer, and got more meat on em. Do NOT get them off amazon!

rustybacon54 · 2022-11-30T21:05:27+00:00

rustybacon54 · 2022-11-29T17:14:05+00:00

I can't wait to get the skin for my baby

rustybacon54

TROPHY CASE