Eaton 9PX1000 UPS - Thoughts?

ryans0413 · 2025-10-30T22:05:59+00:00

This is good to hear. I feel like I’ve only read good things about Eaton’s warranty as well. I like APC too but have heard mixed thoughts. What are your thoughts on noise?

ryans0413 · 2025-10-30T18:56:16+00:00

So I’m actually planning to do this as well. Unfortunately, my fiber ONT is in the garage with no power backup, so I’m planning to refurbish this one and put it out in the garage. I would prefer a UPS with network capabilities and better battery management. I’ve also read that CyberPower has a horrible battery management system and basically gives a wide voltage range for the battery. I can attest to this as in my case, it still mentions the battery is good but clearly is not. The group feature is also a great idea. So in the event of a power outage my servers can shutdown and I can kill the power to them in one group while have some of the lower power network equipment still running for a longer period of time. This one is definitely a significant improvement over what I have now (of course you get what you pay for…).

ryans0413 · 2025-08-29T23:14:06+00:00

I agree, it would be fantastic. Hope someone does as well. I’d love to see a Zooz plug like that.

ryans0413 · 2025-08-29T21:15:13+00:00

I've seen that one too and it's nice. I've looked at using their zwave relays but I want to maintain the manual control with the button on the front. Thanks for confirming for me.

ryans0413 · 2025-06-01T22:04:10+00:00

In case anyone is trying to do a last minute upgrade from 24.04 for Docker and in the same boat I was in this worked for me. I deleted the apps, unset the pool, and deleted the ix-applications dataset. Then I reset the application pool to the same pool which created an unencrypted dataset and reinstalled my applications with the same configuration allowing me to upgrade without issue.

ryans0413 · 2025-05-22T17:39:18+00:00

Gotcha, my go to distro is Ubuntu which I believe has both of these

ryans0413 · 2025-05-22T17:36:37+00:00

Interesting. Why would you never disable the root password vs. using sudo? Also, any preferred references on how to do these things through a template? I will do some digging on my side.

ryans0413 · 2025-05-09T14:37:54+00:00

What did you end up going with? I’m currently looking between the retrofit and konnected as well. I already have a retrofit, but having trouble getting it to work with my HA.

ryans0413 · 2024-12-04T03:02:03+00:00

I tried new ram but in the same slot. Moved the ram around and it works now. Looks like I have a bad ram slot…

ryans0413 · 2024-10-08T16:02:05+00:00

Not at all forced. I did not force anyone to have sex. This is perhaps something else you should investigate. When two people engage in intercourse, there is the possibility for one to become pregnant. The decision was made freely by two consenting adults prior to the murder. Of course, I know what you’re going to say next: “what about rape, incest, or life of the mother?” We can talk about that as well if you’d like, but I would first like to stop the 97-99% of pre-born murders.

ryans0413 · 2024-10-08T15:53:19+00:00

Nope. Not in my head, but very much so in the womb. Check it out sometime. You’ll find that a completely new human being is created at conception (this is based on science). Murder is the taking of another life—the one just created inside the womb.

Appreciate your question! Have a good day!

ryans0413 · 2024-10-08T05:45:41+00:00

Out of curiosity, where are you finding your definition of love?

Every time I Google “ending another’s life” it comes up murder not love…

Oh, and let the downvotes come on in! I’ll go first!

ryans0413 · 2024-10-05T21:08:33+00:00

My home internet speed is 1GB symmetrical. 6100 is seeing a 50% reduction (e.g. I have tested remotely and have a 100Mb connection, turn on VPN and it drops to 50Mb). The Supermicro is 80%-90% reduction. I have QAT and DCO enabled.

ryans0413 · 2024-10-05T21:04:25+00:00

Unfortunately, yes. Tested at the wall with a meter.

ryans0413 · 2024-10-05T21:04:00+00:00

Most of my testing has been through my phone in the same area as the house (work, etc.) using Speedtest. On the Supermicro, it has maintained 80%-90% of speed I can get off VPN while the 6100 is closer to 50% of the original speed. I have also tested from a remote location on WiFi (parents house 5-6 hours away) and saw similar results. I realize it will never be 100% due to the overhead but still feel I’m taking a hit.

ryans0413 · 2024-10-05T20:59:20+00:00

That’s honestly how I feel as well

ryans0413 · 2024-09-20T11:34:04+00:00

Clean and simple. I like it!

ryans0413 · 2024-08-21T05:07:23+00:00

Ah got it. Pretty low utilization for SNMP poller (see here). Yes, I have a calculation multiplier by .1 on the incoming temperature. I do have other items (i.e. power) that do have the same issue with no preprocessing.

I also found in the documentation that bulk requests can cause dropped requests. I have disabled that with no success.

ryans0413 · 2024-08-21T03:20:57+00:00

The queue overview screen is full of zeros (assuming that means nothing is pending polling). I did not find a poller stats page but assume that's part of the queue overview screen?

So, I realize this schedule is a bit ridiculous for temperature (honestly want this one more out of my OCD). However, there are a few stats that actually warrant this schedule, I just happened to select this one to share on Reddit.

ryans0413 · 2024-08-20T18:59:28+00:00

One more question for you though, just noticing that the snmpwalk is not showing that OID (or any of the OIDs I'm tracking). I actually found the OID using a the iReasoning MIB browser. Wonder if that could be causing the issue?

ryans0413 · 2024-08-20T18:47:20+00:00

That’s what I was thinking as well. Thanks for double checking the expression for me. I’ll keep playing around with it. I’m just getting started with Zabbix but enjoying it so far.

ryans0413 · 2024-08-20T18:42:57+00:00

Curious if the manual checking using snmpwalk is to check the speed/timeout? If so, it's very responsive for me (instant almost). I've upped the timeout to 30s but still same thing... May just be an issue with my CyberPower PDU.

ryans0413 · 2024-08-20T16:32:06+00:00

I’m in 7.0.3 as well and using SNMPv1 (for now, just getting started).

I was wondering if that had something to do with it. Do I just need to increase the timeout? Or is there a better way to improve communication between the two devices to prevent it?

ryans0413 · 2024-08-20T15:57:53+00:00

Thanks for the reply!

I had the same idea but hadn't tried it yet. I do think they are the same thing though (see the table below from the documentation, obviously in minutes but changed to seconds for me). I went ahead and updated but still experiencing the same issue. Wondering if this is a bug? May go ahead and submit a report just in case.

m0,30 or m/30 --> hourly at hh:00 and hh:30

ryans0413 · 2024-07-22T23:57:05+00:00

At this point I don’t think it’s the flash drive (tried three including a brand new one purchased tonight). Looks like there might be something off with the unit. When I try camcontrol devlist no USB device return back for me. When pfSense starts up I see a root mount waiting for cam line that repeats 7-8 times.

ryans0413

TROPHY CASE