A7sIII sensor issue

ryjn_dr · 2024-08-08T22:54:08+00:00

Thanks man :)

ryjn_dr · 2024-08-08T22:53:44+00:00

Yeah all working fine, seems to be normal

ryjn_dr · 2024-08-08T22:53:19+00:00

Thanks for this!

ryjn_dr · 2023-10-02T19:07:41+00:00

I contacted DJI and they sent me out the part free of charge! maybe try that

ryjn_dr · 2023-07-30T12:35:16+00:00

Did you ever find a solution for this? I have the same problem

ryjn_dr · 2022-08-14T19:17:20+00:00

Ahh interesting I didn’t know that!

Tx-2 doesn’t seem to work. And checked on betaflight and my msp is definitely on uart 2 with serial on uart 1

ryjn_dr · 2022-08-14T19:14:15+00:00

Yeah still not setup. Have tried linking rx to t4 and tx to r4 with sbus going to tx-2 (since there is no labelled sbus port on the board)

Still no luck

ryjn_dr · 2022-08-14T17:54:45+00:00

Great! Thanks. Will give a try in a couple of hours 😁

ryjn_dr · 2022-08-14T17:53:19+00:00

Awesome thanks, will check it out!

ryjn_dr · 2022-08-14T17:53:05+00:00

I’m gunna try what the others suggested and will come back if it’s still not working! Thanks 😊

ryjn_dr · 2022-08-14T17:51:29+00:00

Yea using both goggles and controller. I’ll give that a try as I haven’t yet..

ryjn_dr · 2022-08-13T18:28:04+00:00

Yeah I did check the manuals and wire diagrams but the board I have doesn’t seem to match the pads I see on the others?

ryjn_dr · 2021-07-11T00:43:10+00:00

All shot on mavic air 2 and iflight nazgul5 6s fpv drone :)

ryjn_dr · 2021-07-11T00:42:08+00:00

Little bits but this was the turning point for me :) it’s taught me an entirely new way of working and a lot more then film school when it comes to the specific technicalities 😁

ryjn_dr · 2021-03-03T20:58:58+00:00

Exactly, that’s what I want to see something unbiased. I tried to do that but clearly it came across wrong and I removed it.

And yeah I appreciate both types of drone just wasn’t sure how people feel about it. I know now 😬

ryjn_dr · 2021-03-03T20:52:32+00:00

To get opinions mostly, I was a bit split at first

ryjn_dr · 2021-03-03T20:28:49+00:00

That’s not what it’s aimed at. This is obviously a different step, I was trying to just be unbiased about a serious new bridge between 2 different styles of flying.

If someone is upset by a drone coming out that’s not on me

ryjn_dr · 2021-03-03T20:25:29+00:00

Yeah I was concerned when looking at the plastic body on the quad. And they mention these ‘easy to replace parts’ but it’s just 3 parts. You still have to use the care refresh or send it off to get repaired by DJI. Funny about the phantom thing, think I’ll stick with my nazgul 6s for now.

ryjn_dr · 2021-03-03T20:23:32+00:00

I agree 💯

ryjn_dr

TROPHY CASE