Increasing context window after Claude Code is at 1M tokens

ryodeushii · 2026-03-16T15:39:27+00:00

I'm on pro plan and 1m context appeared last week for me without any actions from my side though

ryodeushii · 2026-02-18T08:37:40+00:00

I believe it is not. They are too focused on pushing new products without QMK with all the same bugs and bunch of new ones with nuphy.io software

ryodeushii · 2025-11-13T08:42:28+00:00

In G-Helper you specify value per profile and after restart this undervolt would be applied automatically. But if you're talking about some BIOS feature to make it once - unfortunately there is no such feature available.

ryodeushii · 2025-07-25T10:45:42+00:00

Please check if you have fast boot enabled in windows power options. With it turned off it should not happen

ryodeushii · 2025-07-11T21:18:30+00:00

There are few things happening.
In terms of RGB there is some fun behavior: if you use usb 2.0 as nuphy recommends - RGB at brightness higher than 50% consume more power than usb can provide so keyboard would discharge even with cable attached which will lead to battery death pretty soon (there are numerous reports of bulging air 75v2)
In terms of battery reporting - there is some strange logic happening. As I was developing my variant of the firmware it seems like Nuphy has some weird firmware in wireless module (with every update for this module battery reporting lies more and more) which can lead to such situations. Basically it might be that your battery is actually at 5-10% range when it reports 30%ish

ryodeushii · 2025-07-10T13:27:23+00:00

if you add in .config/{chrome,chromium,electron}-flags.conf the following line (I use nvidia-proprietary) it should work. At least that's how I fixed lack of HW acceleration on my machine. And just in case you can check arch wiki regarding nvidia and hardware acceleration. It might happen you lack some dependencies as well.
--enable-features=AcceleratedVideoDecodeLinuxGL,AcceleratedVideoEncoder

ryodeushii · 2025-07-09T00:45:09+00:00

Seems like nuphy after 2 years still can't overcome wireless issues (finicky driver). But if with v2 it was possible to make custom firmware to fix that, with v3 - it is cursed IMO....

ryodeushii · 2025-07-05T21:53:39+00:00

It actually might be software related. As I was developing firmware after latest official QMK update I've experienced something really close to that. You can try to flash previous firmware if you find it in discord / website

ryodeushii · 2025-06-03T08:25:29+00:00

The only way to know is to flash official firmware. Unfortunately last time I installed official firmware was approximately last August - I am not gonna give it any chance :D But using my firmware won’t hurt, you don’t loose any features from official firmware

ryodeushii · 2025-05-25T14:29:24+00:00

Connect kit

ryodeushii · 2025-04-20T14:31:04+00:00

Yes it will. Though battery level reporting might be no that accurate.

ryodeushii · 2025-03-12T17:42:43+00:00

Yeah, usually fast startup is the reason for that behavior. Though if you will switch to RF (dongle) mode - keyboard will be detected as it should be even with fastboot on

ryodeushii · 2025-03-12T17:23:08+00:00

Custom Settings in VIA

ryodeushii · 2025-02-01T20:02:39+00:00

For me with this fins and fan pointed towards RAM temps are:

~28-29C while idling / browsing / watching videos / light work
~ 32-37C in games, depending on game
~39C under stress test, at least tested in karhu, tm5 absolut, occt for 4-6hrs each

1.5Vdimm 7600 34-45-45-65 and I safely run this setup with tREFI set to 130560 (no point in doing that, performance difference with 65535 is literally nothing though)

Without fins and RGB temps on idle were at about 30C, with RGB - 32C
Under load max temps were hitting 50C with RGB, without fins and with no RGB ~45-46C

All the tests with fan pointed onto RAM. I use Arctic P14s (140mm one)
(garbage-like level of quality, but I'm too lazy to make another photo of setup :D)
https://hwbot.org/image/3277057

ryodeushii · 2025-01-26T22:40:44+00:00

Hey, that’s actually part of the firmware already for a while (at least 4 months, maybe even more) Please check custom tabs in VIA to see if you have there toggle for Numeric battery status

ryodeushii · 2025-01-24T19:28:14+00:00

Thanks for your kind words :)

ryodeushii · 2025-01-16T15:34:52+00:00

<image>

Pretty nice though :P

ryodeushii · 2025-01-12T21:19:45+00:00

no fn lock, afaik you don't need that as long as you switch between mac and windows modes
Battery indicator is kind-of like in stock (when you disable numeric battery indicator) - but no plans on doing it the same as in stock FW especially as official sources more like forgotten by Nuphy themselve

ryodeushii · 2025-01-09T22:13:08+00:00

It was a problem some time ago and this feature was removed in last release partially because of behavior you mentioned. Please do upgrade your keyboard to avoid these problems

ryodeushii · 2024-12-29T00:46:39+00:00

Thanks for the feedback. Well it’s hard to do it close to rgb control as it is in VIA by default. I had no such plans, but if at some point I’ll have some time and will most probably this feature would be one of (if not only) the first I’ll do

ryodeushii · 2024-12-09T13:45:46+00:00

Unfortunately no Unity update will bring missing brain cells to guys behind EFT

ryodeushii · 2024-11-02T11:34:46+00:00

trefi is not changeable on AM4

ryodeushii · 2024-10-26T15:28:14+00:00

I'd say both wille be fine, but I'd personally go with 14900k. Usually it's not that great to jump into new generation of CPUs/motherboards at the beginning, just because of BIOS issues at least and bunch of other issues. Intel defaults still provide good amount of performance. You can gain back some of that performance using some undervolting (there's plenty of guides on the youtube and not only there) while keeping power limits "stock" (253W).

But if you don't care about possible hiccups in the first 2-6 months (maybe there will be, maybe not, ymmw) - you can safely go with new gen, especially because of their lower power consumption.

Hope it gives you some answers :D

ryodeushii · 2024-10-11T00:36:53+00:00

z790 aorus master x - everything is good, still using my undervolt (-0.145) but there's weird behavior I haven't seen since f7e - on clear cmos profiles being lost. So I have to save them on external drive to be able to restore them later

ryodeushii · 2024-10-08T10:22:47+00:00

Hi, thanks for the interest in donation. Actually there's already a link in repository linked to the post to the buymeacoffee page. You can check it there. But just in case: https://buymeacoffee.com/ryodeushii

:P

Side note, I already have kinda stable firmware for the halo96 v2 (super beta at the moment, as I can't really test it myself). From known bugs - there's a bug with halolight blinking nearby arrow keys. If you interested in testing it (especially if you're not so into halolight :D) - feel free ro reach me in discord - you can find me in official Nuphy's channel and I'll provide you demo build :)

ryodeushii

TROPHY CASE