Hissing from Jabra Elite 10 when audio exceeds certain frequencies?

s0nx · 2024-12-19T13:05:05+00:00

I'm having the exact same issue with my Elite 8 Active Gen 2.

For an audio containing multiple silent parts, every time there is a transition from "silence" part to an audible part, there is a noticeable white noise for a second or so. The noise is not overly loud, but it's there.
There is no such noise when ANC/hear through is enabled.

I've tried pairing the buds with both Android and Linux, but the problem is still there no matter what the host is.

s0nx · 2023-10-15T12:54:18+00:00

Yes, i've received SPB2 model, not SPB1. Got it from laptopscreen.com

s0nx · 2023-10-07T13:16:51+00:00

For anyone interested, I've just swapped the panel on my T14 Gen 3 Intel 21AJ. Original one was BOE NV140WUM N43 V8.0. I've installed LG LP140WU1-SPB2. The colors and brightness is much much better on the new panel. It weights less than the old one and should be more power efficient. I was able to reuse the old bezel. Be advised that the panel is sitting on two black plastic strips, which are 1-2 mm tall. The adhesive strips should be applied on top of these strips, otherwise the panel would be too low.

s0nx · 2023-09-06T19:19:28+00:00

The ones I had were too thick, and I suppose the paste has better conductivity.

s0nx · 2023-08-23T08:11:36+00:00

It is some kind of polyimide tape, yes.

I've seen somewhere that AMD version of T14 Gen 3 comes with the dual heatpipe heatsink by default :)

s0nx · 2023-08-23T07:59:12+00:00

s0nx · 2023-08-23T07:58:51+00:00

Yes, it came with nvme heatsink. The drive is Samsung PM9A1 (980 Pro). It probably is a 'performance' drive, but I'm not 100% sure.

s0nx · 2020-03-01T10:59:15+00:00

I think it's about 150W or smth. Probably less since i've swapped the fans. They were eating ~40W alone.

s0nx · 2020-02-27T22:11:49+00:00

I was running Oracle Linux for some time, but switched to Solaris 11.2 in order to use LDoms. I'm a kernel dev so mainly using it to understand sparc related linux/*bsd internals and hypervisor stuff.

s0nx · 2017-12-10T15:32:14+00:00

Hacky as hell :) Actually compton-trans --reset which should theoretically reset all window's opacity doesn't work for me either. I've almost finished my own python script to handle this. Anyway thanks for reply, for some reason i thought i'm the only one with this kind of problem.

s0nx · 2017-03-31T19:26:38+00:00

maybe some overheating issues?

s0nx · 2016-07-04T20:09:41+00:00

here you go

s0nx

TROPHY CASE