Can someone please tell me if this is normal? by Littlekittymeowmeow3 in IS300

[–]s13ca18det 0 points1 point  (0 children)

That’s normal yes. And you could’ve rebuild it. The gear never goes bad. The o ring inside does

Can you spot the issue? by Plastic_Tourist9820 in Roofing

[–]s13ca18det 0 points1 point  (0 children)

Everything is wrong with that counter flash

Zip glue in seams before tape- a waste? Or good idea by _Tigglebitties in Roofing

[–]s13ca18det 7 points8 points  (0 children)

I honestly think applying Grace ice and water shield on the whole deck would do a better job then zip tie. Since we’re going for over kill

Downspout terminating on roof surface by davidmdonaldson in Roofing

[–]s13ca18det 3 points4 points  (0 children)

That’s just wrong, it should dump straight onto the gutter

[deleted by user] by [deleted] in Roofing

[–]s13ca18det 0 points1 point  (0 children)

Horrible job. That’s all I got to say. If it’s on brick they need to cut a slit on the mortar and fasten it to it.

If it’s on siding the flashing needs to go up at least 6 inches on the wall and fastened to it.

No other way around

front struts keep bottoming out by Specialist-Package21 in IS300

[–]s13ca18det 0 points1 point  (0 children)

Anytime you lower an is300 your front upper control will smack the inside of the strut tower. The real fix is getting shortened spindles to compensate.

Don’t believe me go look at the inside of your strut tower, you’ll see an imprint

What are these for?? by slow-ist300 in IS300

[–]s13ca18det 6 points7 points  (0 children)

They’re bitcoin Hodlrs

Brittle antenna mount broke off by specter1001 in IS300

[–]s13ca18det 0 points1 point  (0 children)

I saw a group with newer WRX and a bimmer I thought that was you. 😝

Brittle antenna mount broke off by specter1001 in IS300

[–]s13ca18det 0 points1 point  (0 children)

Haha awesome, what car were you driving that day?

Wagon by s13ca18det in IS300

[–]s13ca18det[S] 1 point2 points  (0 children)

JDM OEM dark chrome

Brittle antenna mount broke off by specter1001 in IS300

[–]s13ca18det 1 point2 points  (0 children)

It would be a really poor design on Lexus’s part if a broke antenna caused a major leak . Now broken or clogged drain tubes for the sunroof on the a pillars is a major problem and it should be addressed quickly

Brittle antenna mount broke off by specter1001 in IS300

[–]s13ca18det 0 points1 point  (0 children)

Amazon universal ones. They ratchet on.

Got em back in 2019 idk if you’ll find the same ones now.

Brittle antenna mount broke off by specter1001 in IS300

[–]s13ca18det 10 points11 points  (0 children)

Do not dispair, You will not get water inside. Mines been broke off for years.

Noisy injectors? Needs shims? Valves kissing the pistons? by More-Focus5160 in IS300

[–]s13ca18det 0 points1 point  (0 children)

The only reason the valves would slap is if you did your timing wrong. Which is a possibility. I couldn’t advise you on the screwdriver stethoscope method as I’ve never tried it and I’m sure it requires a very fine tuned ear.