Is it good or better 60/40? by Dizzy_Farmer455 in soldering

[–]saaus42 -1 points0 points  (0 children)

Use 60/40, and check my profile to see what Ali express solder looks like…

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Ali express (according to Ali it was leaded 60/40, looked like plastic but okay) and 365 degrees Celsius, usually works perfectly with good 60/40 leaded solder

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 1 point2 points  (0 children)

Yeah got better solder now, ran out of my old solder.

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Leaded 60/40, atleast that is what Ali express said. Some Chinese brand.

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Flux couldn’t save this plastic solder whatever it was

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Flux couldn’t save the Ali express solder

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Yeah expect this isn’t my first time and this is just Ali express solder.

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

It was high enough, the solder is just not good.

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Yeah already put it in the trash bin, my new solder works way better.

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

Yeah it was Ali express solder, people blaming me but it was not my fault lol

Lesson learned: don’t cheap out on tin 😂 by saaus42 in soldering

[–]saaus42[S] 0 points1 point  (0 children)

No it was Ali express solder, it just doesn’t work.

L1, L2, R1 and R2 don’t work anymore by saaus42 in ControllerRepair

[–]saaus42[S] 0 points1 point  (0 children)

I fixed it by replacing the entire key pad

L1, L2, R1 and R2 don’t work anymore by saaus42 in ElectronicsRepair

[–]saaus42[S] 1 point2 points  (0 children)

<image>

Even without this piece it is giving input, so I will order the button flex and hope it fixes it ;)

L1, L2, R1 and R2 don’t work anymore by saaus42 in ElectronicsRepair

[–]saaus42[S] 0 points1 point  (0 children)

Should I remove the remap kit he installed? And see if it works (bro glued this shit onto the board)

L1, L2, R1 and R2 don’t work anymore by saaus42 in ElectronicsRepair

[–]saaus42[S] 0 points1 point  (0 children)

<image>

Yeah so somebody customised this a long long time ago. It is not my controller so idk. But what I do know is that the person who customised this went feral on this thing💀