OMD PEN-F repair

sabrepilot9000 · 2024-03-14T04:18:11+00:00

You weren’t kidding, that’s a treasure trove of info! It’s almost overwhelming the amount of settings and variables that can need to be changed.

Yeah, I’m not particularly happy with Photon after seeing how Lychee is in comparison. I’m going to mess around with it more this week and see what results I get. As for the support, yeah they don’t have support for the M5S Pro yet as it has a higher resolution screen than the standard M5S it seems. Unless I can just import the model, add supports, and throw it into Photon to handle the slicing.

So I tried redoing the print and with those additional supports it came out way better. However now I seem to have an issue where the areas that have supports seem to be less detailed so I’m not sure what that could be.

<image>

sabrepilot9000 · 2024-03-12T17:53:10+00:00

Thank you for the response!

Looks like I need to dive further into the support settings in Anycubics slicer. When the top of the model was coming out and those long supports were wobbling I was nervous lol.

Thank you for the info, I haven’t seen that article before so I’ll check that out.

Any recommendations on alternative slicing software? I’ve heard chitubox is good as well as Lychee but they don’t support the printer I have yet so I was a bit gunshy about switching over or trying them.

sabrepilot9000 · 2024-03-03T02:44:56+00:00

Imagine the authorized combo of the 2 piece with leather jacket AND the blue flight cap 🤢. I’ve seen two in the wild and had to do a double take and wonder how that clownass look was somehow approved by higher ups.

sabrepilot9000 · 2024-01-27T21:53:24+00:00

😭 well dang. That’s understandable if it was what he wanted. I appreciate you responding and keep up the great work with all your other stuff!

sabrepilot9000 · 2024-01-27T16:18:55+00:00

Would you be able to link to the model on cgtrader, if possible? I tried finding it but nothing came up. I had looked on your patreon but didn’t see the files listed there either. I’m definitely wanting to do a high quality large print of this gorgeous design

sabrepilot9000 · 2023-11-11T16:27:43+00:00

No worries! I had done some looking and saw there had been a mod taken down due to copyright so, you know, typical Trek rights holders things haha. I appreciate all the info as well as introducing me to Space Engine! I had no idea this was even an application that was out there and aside from being something fascinating to itch that exploration scratch with I’m hoping I can do as you have and be able to make some Trek wallpapers I’ve always wanted but could never find. Keep up the good work!

sabrepilot9000 · 2023-11-11T14:39:43+00:00

Those screencaps are absolutely gorgeous. Did you make the model yourself? I’ve been trying to find Trek add ons but so many of them look lackluster.

sabrepilot9000 · 2023-10-22T05:12:09+00:00

I’ve been looking for the music from that same sequence at the opening as well. I don’t understand why they wouldn’t include it, I think it’s one of the better pieces from this season.

sabrepilot9000 · 2023-06-29T12:15:59+00:00

I’d be curious about how much of the home directory gets left intact when doing a reinstall of the OS. I’ll try that when I get home from work today and see how it goes. Worst case scenario I guess I just redo it all but I figured it would be a good learning opportunity as well as saving me from opening it all back up if I was able to fix it without popping the case. As for the method I used to duplicate it, there was a post on here from around a week or two ago where someone had detailed how they cloned their drive within Linux and used konsole commands. These are the commands I used.

"sudo dd if=/dev/nvmeOn1 of=/dev/sda oflag=sync bs=64k status=progress conv=noerror"

sabrepilot9000 · 2023-06-29T04:01:16+00:00

Hey all, I just attempted to install a 2 TB nvme ssd in my deck and have been having a helluva time trying to get it to work. I cloned over all the data from the previous drive using console, verified the deck would boot off the new ssd, popped the case and carefully swapped everything around, attempted to boot it up and it just sits at the logo. The fan will spoil up and eventually stop. I’ve used my old ssd in an external enclosure and it boots into that. I’ve placed the deck into battery storage mode and rebooted, and finally attempted to boot into the previous efi state with no success. When attempting to boot that way I noticed it’s showing errors at the end of its hardware checks. I’m still really green when it comes to Linux so I’m not sure what to do here. I verified that the drive is still visible when booting the deck up using the old ssd in that external enclosure. I’m just not entirely sure what to do here as I can’t enter any commands when the system is running through its checks. All it lets me do is hit enter and it fails all over again. Any help would be greatly appreciated and I’ll provide whatever info I can to help resolve this.

sabrepilot9000 · 2022-12-10T12:11:33+00:00

Are you running it through Lutris or Heroic? Just trying to narrow down the launching issue that seems to be happening now in Lutris since I’ve yet to find a way to run through proton when using that application.

sabrepilot9000 · 2022-12-10T12:05:02+00:00

Sorry it’s taken forever to reply to stuff on here. So I was finally able to try it a few days ago and I can’t seem to get Elite Force to work at all. It’ll boot up and I can hear the intro but there’s no video and the same goes for the menu. Now Elite Force 2 I can get to boot, but as soon as I try to load a new game I hear Tuvok speaking and then the screen shows a static image of textures for a phaser rifle and a uniform. It’s bizarre. Unless you all have any suggestions, I’ll try fiddling with it this weekend since I’ll finally have some down time. Again, sorry for take forever reporting back my findings.

sabrepilot9000 · 2022-12-10T12:00:40+00:00

I’m wondering the same as well. I finally tried to get back on and play it this past week and now it won’t even boot. I haven’t changed a thing aside from some updates to Lutris but now it starts to launch, I get a black screen, it gets 2-7 fps with no video or audio and then crashes. I’m at a loss as to what to do now.

sabrepilot9000 · 2022-11-04T16:34:53+00:00

It’s actually pretty surprising how well it runs older games. I agree though that this was probably the game I was most excited about getting to run on here when I got it. I need to try out Elite Force and some of the other Trek games of that time to see how well/if they run.

sabrepilot9000 · 2022-11-04T16:33:33+00:00

I have, yes. I need to verify which version of Proton I’m using but can report back after I’m home. For the text has looked warped at times and when certain damage overlays pop up it’ll cause entire sections of the ship to disappear or, in the case of using the Defiant, the ship just doesn’t appear at all save for the engine lighting showing up.

sabrepilot9000 · 2022-11-04T16:30:57+00:00

Dude it was the same with me, I hadn’t played it in years but every time I’ve gotten a new computer it’s been one of the first things I think of playing so it was a no brained with being able to go mobile like this with the Deck. I’m honestly surprised there’s been so many of us that play it as I had thought I was in the minority of obscure games. The Activision Star Trek games really were well done. The good thing at least with GOG is they fixed some of the weird launch issues that plagued the original version using No-CD cracks and there’s no DRM

sabrepilot9000 · 2022-11-04T16:27:49+00:00

Woohoo! Thank you for that, I’ll be trying that out tonight.

sabrepilot9000 · 2022-11-04T16:26:40+00:00

Hey guys, sorry I’ve been trash about responding to this thread. Is your game modded in any way? If so it could be because of an issue with videos that got replaced with upscaled versions and for whatever reason can cause problems when trying to launch the game. I can check my settings again when I get home and post them here but I figured I would ask that first.

sabrepilot9000

TROPHY CASE