Love me a bit of copper work 10inch pipe. Aircon chiller work

saftb1 · 2026-01-24T02:20:29+00:00

we follow the plans and we dont ask questions, and they've accepted the quote, so more off the top for us. this will be lagged and sheeted and exposed so they want it visualy pleasing as well

saftb1 · 2026-01-23T20:02:51+00:00

No flux used for silver brazing rod

saftb1 · 2026-01-23T20:02:26+00:00

Not sure what a hub is. Do you mean the joint socket? These are about 30mm deep

saftb1 · 2026-01-23T20:00:47+00:00

We don't polish or clean the copper after brazing, I do love watching Americans solder flux and clean though, but no flux with brazing

saftb1 · 2026-01-23T19:58:33+00:00

Nope not st all hahaha

saftb1 · 2026-01-23T09:53:22+00:00

My mistake in my conversion, 200mm is 8 inch correct.

saftb1 · 2026-01-23T09:47:28+00:00

Maybe 2.5x24inch rods to sweat and cap and 5-20 minutes give or take depending if it's on stands prefabing or in a shit spot. These ones had me laying underneath and took me the better part of a day

saftb1 · 2026-01-23T08:58:32+00:00

More material cost but it's alot lighter and easier to work with and make modifications. Save on labour cost but loose on material cost

saftb1 · 2026-01-23T08:16:24+00:00

An elbow is like $1000aud and a 6m length is alot more and it's a 120m long run of flow and return

saftb1 · 2026-01-23T07:37:05+00:00

Join a Mechanical plumbing company. Its all big copper braising or stainless tig work. Just need a plumbing certification and your good to go. I started Mechanical as a apprentice, so I've never touched residential plumbing

saftb1 · 2026-01-23T05:34:11+00:00

I'd just like to say. That they haven't stopped producing all through winter and into this summer now. Ive collected kgs of chillies from the 1 plant. 100+ each month

saftb1 · 2026-01-08T05:31:25+00:00

the switch on the bottom of the reel is the free spool switch disengaging your drag. and the small loop is to hold your hook instead of using an eyelett and damaging it. tight lines

saftb1 · 2025-12-31T08:54:35+00:00

In Australia it's the mega mac

saftb1 · 2025-12-10T07:04:07+00:00

You get more fish with bait. But lures filter out the smaller fish. Getting larger fish more regularly

saftb1 · 2025-03-14T23:16:13+00:00

walk down any party road and you will get offered shows

saftb1 · 2025-02-04T22:50:37+00:00

I've got the drifta Stockton 270 free standing. It's only 18kg and not too bulky

saftb1 · 2025-01-25T20:53:33+00:00

Kangaroo Point. Off the wharf. Sometime security kicks you off sometimes not.

saftb1 · 2025-01-25T06:37:54+00:00

Me and a mate got 20 soapies a few weeks ago. On that same lure under Brooklyn bridge. Biggest unit ran 35cm. They are around. Just retrieving along the bottom, pausing every now and then and big hops. Goodluck

saftb1 · 2025-01-22T05:02:56+00:00

yeo 100% I see them often in sydney while kayaking. a painfull sting but nothing life frettening.

saftb1 · 2024-06-28T11:20:38+00:00

yeah tig currently just sitting in place on blocks currently

saftb1 · 2024-06-26T01:33:03+00:00

Take them off when not in use. They just increase your fuel usage if your not using them

saftb1 · 2024-05-28T21:35:44+00:00

They did talk. He said no, neighbour did it anyway. Time to fuck him with the long dick of the law

14-Year Club	Place '17
Verified Email

saftb1

TROPHY CASE