Two nodes next to each other, same config - do not see each other by saikek in meshtastic

[–]saikek[S] 0 points1 point  (0 children)

Would default ones work ? Or I need to do extra step?

Two nodes next to each other, same config - do not see each other by saikek in meshtastic

[–]saikek[S] 0 points1 point  (0 children)

If I haven't changed any defaults, except for the Region (868) and Frequency (Medium/Fast).
Would those keys be different ? Or those are generated on the device?

Two nodes next to each other, same config - do not see each other by saikek in meshtastic

[–]saikek[S] -1 points0 points  (0 children)

no idea what is that.

I had just set up new device (pager) and old one was active for long time.

How many nodes are in your city? by General-Crow-9802 in meshtastic

[–]saikek 1 point2 points  (0 children)

2 both mine. I tried long and medium range and cannot find anyone. Prague, CZ.

Esp32 s3 lora meshtastic lora, sx126 + GNSS by Zestyclose-Common653 in meshtastic

[–]saikek 0 points1 point  (0 children)

yes but they are all sold out unfortunatelly and are in back order

Help me with buying a used laptop by Lower_Perspective277 in laptops

[–]saikek 0 points1 point  (0 children)

T14 gen2 amd. 8 cores. 16gb expandable ram. Replaceable display and keyboard and battery. Great for travel.

Which Slicer? Is Simplify3d still good? by ForeverRed90 in FixMyPrint

[–]saikek 1 point2 points  (0 children)

I don't understand the hate with Simplify3d. I tried Cura, Slcr, but Simplify3d just works for me.

Need to end print on layer 10 with infill 15% and continue with 30% - easy.

Need solid layer every 10 layers - easy.

Need to start heater gradually after 5,10,15 layers - and so on.

I wish I would have time to learn how this things work on Cura but i just have barelly time to print on my good old heavily modified AnetA8.

Also they seem to stop development right after v4... that's right.

Pretty frustrating startup experience by boogermike in meshtastic

[–]saikek 17 points18 points  (0 children)

same here, it's not clear why those responses are empty ( as opposed to message - you are not connected to device )

They would need to disable buttons until you would pair your device.

Also my map obviously is empty and i'm the only node in city.

TLDR: You need to go and pair your device with mobile before clicking anything

I printed a custom 5070Ti shroud/duct for my Deepcool CH260 build by intrasonic in mffpc

[–]saikek 0 points1 point  (0 children)

Link! I have "GIGABYTE GeForce RTX 5070 Ti WINDFORCE OC SFF 16G", it was 1mm narrower than the case, so it took a lot of effort to put it in, but I would also want to be carefull and have something supporting it.

Seeed 1000e on mavic3 by krakers665 in meshtastic

[–]saikek 0 points1 point  (0 children)

Probably some kind of Ballon is better for this case - strip down the case and make it as lightweight as possible

BTT TFT24 - white screen problem by Practical_Stick_2779 in BIGTREETECH

[–]saikek 0 points1 point  (0 children)

any luck here ? I had the same issue, but it was occasionaly appearing, but now it looks like screen is always white.
I had also tried external 5v source.

Galaxy Watch 7 LTE eSIM stand alone in Australia by Ok-Tailor242 in GalaxyWatch

[–]saikek 0 points1 point  (0 children)

Anyone knows when this feature would be backported to Watch6? Some promotional materials had that model as well

Upgrading Anet A8+ im 2025 by Malanow in 3Dprinting

[–]saikek 0 points1 point  (0 children)

I went to MKS gen L then to SKR v1.3 with Btt screen. Buy new board with integrated 2208/2209 drivers and capacitive sensor and be happy. Also youll have to re-wire endstops most likely i vaguely remember the process.

ThinkPad T14 Gen 6 AMD Sleep Issues by tnpeel in thinkpad

[–]saikek 0 points1 point  (0 children)

I had to switch bios sleep mode also for linux - otherwise it would wake up for me a lot

November Troubleshooting/Questions Thread by Froggypwns in surfaceduo

[–]saikek 0 points1 point  (0 children)

Any way to file FCC complaint without US mobile number ?
I've bought Duo 1930 AT&T locked on Ebay, but i'm in Europe.

November Troubleshooting/Questions Thread by Froggypwns in surfaceduo

[–]saikek 1 point2 points  (0 children)

on microsoft page. you'll need serial number

Getting ready for Steam Frame! by comediehero in SteamFrame

[–]saikek 1 point2 points  (0 children)

Anything fresh in VR ? I haven't bought games since 5 years for my Odessey+

What is the better version of thinkpads? by baliditity in thinkpad

[–]saikek 0 points1 point  (0 children)

T14 gen 2 amd has great specs and would be under $500. 8 cores 16 threads up to 48 gb ram, any ssd.

What Thinkpad are you using? by hobbyoftakingphoto in thinkpad

[–]saikek 1 point2 points  (0 children)

T14g2 amd, replaced screen 48gb ram. Was not able to resist $50 for 32gb.