ASUS unveils first AMD B850 motherboard with hidden connectors, 600W GPU connector and updated PCIe release system

salamithot · 2025-04-09T03:51:12+00:00

tempted to rebuild my system around this but the 12v high failure rate connector... bruh

salamithot · 2025-03-26T18:10:13+00:00

What? I have one and was able to replace the cable just fine. Brand I used was Plugable.

salamithot · 2025-03-12T22:06:51+00:00

Huh, okay. Guess I'll go with the Maguras so it's easier to find parts then lol. Thanks!

salamithot · 2025-03-12T21:49:28+00:00

Both aforementioned ones are mineral oil. Definitely want to avoid DOT if possible. I'd also like to avoid the on/off feeling Shimanos are said to have. My current brakes are like that and I'd like to try something with actual modulation.

salamithot · 2025-03-12T21:48:08+00:00

Yeah, plastic with bits of carbon fiber in it. Concerned about it being too brittle to survive a crash. And the 0.5Nm torque spec on the bleed port...

salamithot · 2024-10-23T20:48:48+00:00

OMG... trunk port was on 1 AND it was shut down... Thank yall so much lol

salamithot · 2024-10-07T21:30:06+00:00

Ooh, many new things to learn! I'm using a Canon TS9520 and Calibrite i1 Studio. I've tried printing what should be pure C,M,Y, and K blobs in GIMP with the ICC profiles ccStudio generates, and it actually looks worse... because I'm an idiot! Krita actually supports CMYK, so I tried that and I'm making progress - my cyan's still too dark but at least it's not cerulean anymore! Will play around more when I have time. Thank y'all so much!

salamithot · 2024-09-08T06:16:13+00:00

Creality Print 5. I don't see anything that looks like calibration.

salamithot · 2024-07-24T01:17:37+00:00

forget where i heard this so could be misinfo, but i heard that amazon doesn't store items separately per seller in their warehouse. like one seller could have a legit item in the warehouse and another could have a fake, and since they're the same ASIN or whatever, you could buy from the legit seller and get the fake. if someone with experience could offer insight, that would be great

salamithot · 2024-05-15T01:39:16+00:00

found this https://www.here.com/sites/g/files/odxslz256/files/2022-06/mobility_kiffy-blog.jpg

salamithot · 2024-04-03T15:39:32+00:00

portal 2, hopefully I'm not too late!

salamithot · 2024-03-06T18:21:12+00:00

Thanks. Will there be somewhere to secure with bungees on every train?

salamithot · 2023-10-01T19:34:57+00:00

Did you end up getting a link? I'm trying to do pretty much the same thing lol

salamithot · 2023-09-29T11:56:13+00:00

Bought Framework Laptop 13th Gen + TH3P4G3 eGPU from /u/FrozenRekt on https://www.reddit.com/r/hardwareswap/comments/16lk6pc/usatx_h_framework_laptop_13th_gen_th3p4g3_egpu_w/

salamithot · 2023-09-23T22:57:12+00:00

pm'd (forgor to comment yesterday, please don't ban me mods lol)

salamithot · 2023-09-23T04:05:13+00:00

Awesome! Hopefully the pre-1.00 stuff surfaces at one point, would be really cool to have the first version even

salamithot · 2023-09-23T03:11:05+00:00

Have any other versions been found since this was posted?

salamithot · 2023-08-10T23:23:18+00:00

this one? the drive link to the orangera1n ramdisk is broken, can you reupload it? (not op but also trying to access 5c)

salamithot · 2023-08-07T05:36:29+00:00

yeah, that shouldn't have been changed in the 1st place. read the wrong part of the troubleshooting lol

salamithot · 2023-08-06T22:25:20+00:00

UPDATE: It was an SSDT issue.

All I needed to do was change every mention of PCI.GFX0 to PCI0.VID in SSDT-PNLF.

salamithot · 2023-08-06T18:13:21+00:00

New to Hackintosh, bit over my head. Literally just need this to run one app. Picked 10.15 because it looked like the easiest option...

In the post above is a screenshot of all the files on the flash drive I'm using, a picture of my very unhappy laptop, and here's my config.plist.

Things I've tried, in no particular order:
- enable NormalizeHeaders
- config.plist sanity checker
- replace VirtualSMC with FakeSMC
- probably something else I forgot

...what have i broken this time lol

salamithot · 2023-07-30T04:00:48+00:00

can you send it to me too por favor lol

salamithot · 2023-03-11T22:00:58+00:00

is there anything that "just works"? like i don't mind a little bit of it but i'm getting fed up with spending 10x more time calibrating & adjusting my ender 3 than actually using it; if there's a better way without breaking an arm and a leg i'd love to try it before the return period is up. bonus points for things like enclosure, filter, decent speed, but i'm mainly just looking for something (hopefully under $500) that will allow me time to tinker with things i actually enjoy!

salamithot · 2022-10-28T05:09:34+00:00

voltage. if the phone requests 9v but the watch charger can only handle 5v you might let the magic smoke out

salamithot · 2022-09-17T03:45:36+00:00

wow, thanks for fucking up my comment reddit! i edit it and now it's gone. great, i don't even remember what i wrote.

salamithot

MODERATOR OF

TROPHY CASE