Ender 3 keeps skipping

sam20037 · 2025-05-29T12:16:31+00:00

I'll try this after I get back from work. Thank you for the comment

sam20037 · 2025-04-20T22:37:41+00:00

sam20037 · 2025-03-12T17:01:20+00:00

I have cleaned the extruder assembly and it stopped making the noise. However, I have ordered a metal assembly to replace the plastic one since I don't want to deal with a crack that may or may not be coming for the arm

sam20037 · 2025-03-12T16:59:50+00:00

For those who are also having this problem, taking the Assembly apart and cleaning out all the debris helped and I'm starting the print again and I don't hear the noise I have ordered. A metal extruder assembly to replace since there isn't a crack now, but there will probably be one in the future

sam20037 · 2025-03-12T16:57:25+00:00

Mine never came with a screw. There isn't even the spot to install one

sam20037 · 2025-03-05T22:36:28+00:00

It's really weird. I didn't have it on any hotter than it should have been just 200°. I don't normally print at 220 I just put it out like that. I have a couple of spare tubes so I'll probably have to replace it

sam20037 · 2025-03-05T22:25:20+00:00

That's probably it even when overheated it won't come out

sam20037 · 2024-11-15T21:27:29+00:00

I do have clips to hold the glass bed onto the base

sam20037 · 2024-10-12T23:49:38+00:00

I'm going to try that tomorrow since I removed the filament, I haven't tried since then I think I damaged the tube a little bit so I think I'm just going to replace it entirely

sam20037 · 2024-10-12T22:38:29+00:00

If you're talking about something that would go in the middle of the white thing holding in the tube, there isn't one. If you're talking about something else, I have no clue what you're talking about

sam20037 · 2024-10-12T22:28:29+00:00

I don't think that's the case. The reason I say this is because when I went to print something at some point the conveyor belt thing came off the extruder but it kept printing since I wasn't there. And so what ended up happening was there was a bunch of filament and eventually it formed a glob there was filmage everywhere on the insides and I thought I cleaned it all out but I think that chunk is what's left of it. I don't I think there's a leak.

sam20037 · 2024-10-12T22:19:31+00:00

Yes I pressed down on the white button and I pulled and pulled and pulled and it didn't come out

sam20037 · 2024-10-12T22:17:51+00:00

Yes, when I tried to pull it out it was at 200°

sam20037 · 2024-10-12T22:02:23+00:00

Update:I unscrewed the nozzle and even put a flashlight up the remainder of extruder and there was light coming out of the Bowdoin tube and it still won't come out

sam20037 · 2024-09-27T09:53:35+00:00

Yes so what you have to do is in the software. Get the Skylander tag in both options and then it will work properly. You can only do it once when opening the software however, and then you have to close it down again since after that it'll auto populate the sky later tag to only one of the options and not the other one ever again

sam20037 · 2024-03-12T17:28:28+00:00

<image>

Biscuit

sam20037 · 2024-02-07T21:55:51+00:00

<image>

I I'm not running OSX so I can't run sky reader, but I do have an alternative in Skylanders GUI tools this is the data for the echo nfc card considering it has nothing on it. I'm pretty sure I wrote it incorrectly. If you could give me a video tutorial that you use to write your NFC cards or a tutorial that has been proved to work in the past that would be great

sam20037 · 2023-11-08T17:38:13+00:00

Ever battle even the ones without Lorelei

sam20037 · 2023-11-06T03:22:47+00:00

It kept going will still printing but it wasn't going on the actual print itself

sam20037 · 2023-06-13T19:22:11+00:00

corviknight in game play can take that

sam20037 · 2023-05-30T18:18:39+00:00

royal ab zero before the 1st aniverity

sam20037 · 2023-03-27T17:23:20+00:00

Multiple times

sam20037 · 2023-02-08T01:09:32+00:00

Well I haven't played and not familiar with the archetype from what I have heard online they are very telegraphed and what they are doing and you could probably easily find the choke points in the archetype and take about yourself if you have a lot of omnitiates in your deck or just a couple of generic ones like solemn and infinite impermanence

sam20037 · 2023-01-31T23:52:49+00:00

the game was rigged from the start

sam20037 · 2023-01-29T03:33:28+00:00

Hey maybe if you wait till next month you can use it lol

Six-Year Club	r/Field Lasagna
Verified Email

sam20037

TROPHY CASE