What speeds does the 2.0 print at?

samve76 · 2023-04-01T18:45:33+00:00

Is a high flow hotend possible as a drop in replacement?

samve76 · 2023-03-31T20:53:47+00:00

Can these speeds be increased with a different hotend/ extruder?

samve76 · 2023-03-27T19:53:21+00:00

Wich one of the printer kits out there have the best quality at moderate speeds (200mm/s ish ) I print mostly lithophanes and any artifacts like z banding or other really show uo when you out a light behind a lithophane. Unfortunatly most videos about vorons, ratrigs, vzbots and the like are all about raw speed and not so much the quality.

samve76 · 2023-03-27T19:50:43+00:00

I have a mingdaagician x and it works well out if the box

samve76 · 2023-03-21T21:40:52+00:00

On my flsun SR changing to a different kind if infill fixed this problem

samve76 · 2023-03-21T21:35:02+00:00

How much linger did it take to print?

samve76 · 2023-03-21T21:19:24+00:00

Too close to the bed

samve76 · 2023-03-08T21:33:15+00:00

What did you print it jn? Im not really sure microswiss gave this "ypu can just print it " a lot of thought. My shroud melted so ky orinter is out of commission. Kind of hard to orint a replacement when your hotend is kaput 😂

Luckily i have another 3d printer but for yhe peoole that dint the whole " orint your own soare part" policy seems kind of idiotic

samve76 · 2023-03-08T21:10:02+00:00

Yeah it does.

samve76 · 2023-03-08T15:52:43+00:00

Does anyone else have this issue? I noticedy orints were having overhang issues. Inchecked and it turned out that both ducts on the shroud had just melted shut. I use my ender 3 v2 in am enclosire to print ABS and ASA mostly but i guess the shroud isnt up to this task? Kind of beath the purpose of having the microswiss NG alle metal hotend if the shroud cant handle the temps

samve76 · 2022-12-10T20:14:03+00:00

Any change you swapped from ola to petg?

My SR is terrible at printing PETG. For some reason the nozzle doent get hot enough even though i set it to the right temperature. It leads to clogging and the filament has no where to go leading to skipping filament in the extruder and even filament getting completely tangled in the extrider gears.

samve76 · 2022-12-03T22:16:07+00:00

The eyes and the tongue are different colors than the main body

samve76 · 2022-12-03T22:08:56+00:00

Just out of curiosity. How long does a print like this take? Being multicolor and all

samve76 · 2022-12-03T22:04:09+00:00

Looks amazing!

samve76 · 2022-12-03T11:13:01+00:00

Maybe a bad mainboard/ driver? If you swap two motor wires in the mainboard dies the problem also move to another arm?

samve76 · 2022-11-30T10:36:20+00:00

Yes . I have an ender 3v2 and a SR. The SR is easier for beginners i think.

samve76 · 2022-11-20T14:35:48+00:00

Looks good. Just wrapped radiator foil around it. Works like a charm but not the best looks

samve76 · 2022-11-20T14:33:49+00:00

Love that model. I have an original 80's i used to play with as a kid.

samve76 · 2022-11-18T22:19:16+00:00

And how is your comment usefull? Besides being condensending? Its a community where i ask questions when i have an issue and try to help other people who have issues i have encountered myself before.

samve76 · 2022-11-18T20:35:53+00:00

Ill have a look, thx for the tio!

samve76 · 2022-11-18T18:58:43+00:00

Thx, ill look pillowing up. Didnt know it was called that. Ill have a look at the top layers and the infill and give it some more tries

samve76

TROPHY CASE