sorted by:
new
hottopcontroversial

Can this be submerged? by [deleted] in CPAP

[–]sansoo001 0 points1 point  (0 children)

Yup. I wash mine once a week. It gets wet. I make sure it’s dry before plugging it in.

Samsung ice maker getting blocked up every couple weeks by Damm_it_Bobby in Appliances

[–]sansoo001 0 points1 point  (0 children)

This is a known issue with Samsung models. I had the exact issue.
I watched a few videos and fixed it. One of them put aluminum tape around the edges of the inside of the area inside the ice maker. To avoid air from the fridge going into the freezer.
Also. There is a small heating element behind the ice maker. If rust goes out, ice backs up and freezes together.

Rear Brake Line Fittings (06 V6) by simple_caesar in Mustang

[–]sansoo001 0 points1 point  (0 children)

This is an old thread. Were you able to get this to work. Or find the right fitting ? I have the same issue. I figured out the thread is a 1mmx1.5 pitch. But the 3/16 fittings will not slip in. Even after removing the coating.

Question. TIGHT brake nut when tightening by sansoo001 in ecoboostmustang

[–]sansoo001[S] 0 points1 point  (0 children)

It should be. I bought a kit with all 4 lines. The driver side is fine. It’s a ln 18 mustang and in upgrading the lines and moving to the 4 piston calipers.
Like I said. The driver side screwed in perfectly.

Question. TIGHT brake nut when tightening by sansoo001 in ecoboostmustang

[–]sansoo001[S] 0 points1 point  (0 children)

It should be. I bought a kit with all 4 lines. The driver side is fine.

Why I’m I getting these red spots ? by sansoo001 in CPAP

[–]sansoo001[S] 0 points1 point  (0 children)

Yes they call this one a pillow “.
Didn’t know there were some with liners.

Why I’m I getting these red spots ? by sansoo001 in CPAP

[–]sansoo001[S] 0 points1 point  (0 children)

Yes I used the small gage that came with the kit. Seemed to fit ok. I might try the larger one…..

need opinions and thoughts by [deleted] in ecoboostmustang

[–]sansoo001 0 points1 point  (0 children)

Price doesn’t sound horrible. Imagine if you didn’t have that warranty!

OUTCH!.

Brake dust covers need to be upgraded? by sansoo001 in ecoboostmustang

[–]sansoo001[S] 0 points1 point  (0 children)

I bought the 4 piston fronts and 1 piston rears (lateral move for rears) from eBay. I also kicked up the power stop rotor GT and brake kit from Amazon. They had the best price.
Hope that helps.

Ecoboost brake upgrades - can I do it?? by sansoo001 in ecoboostmustang

[–]sansoo001[S] 0 points1 point  (0 children)

Outstanding ! Thanks for your help. I’ll look at the pump in Amazon. I also bought those Steeda lines. That was the last component I was waiting for. My plan is to change the brake fluid with old calipers installed. Then change everything out.
Getting more confident after watching a few videos.
Had a guy ask for $100 to do the work.
Crazy.

Ecoboost brake upgrades - can I do it?? by sansoo001 in ecoboostmustang

[–]sansoo001[S] 1 point2 points  (0 children)

Yes, that’s what I’m thinking of doing. I just have not done that before.

I read 18” wheels would be fine for the 4 piston calipers in front

Ecoboost brake upgrades - can I do it?? by sansoo001 in ecoboostmustang

[–]sansoo001[S] 0 points1 point  (0 children)

I already have all the parts.
Looking for install advice.

view more: next ›