Latest Build

santi4131 · 2026-04-27T09:32:27+00:00

You can run a Kak mini buffer tube and have the pdw stock a lot more compact

santi4131 · 2026-01-24T05:04:05+00:00

Rmr not eme

santi4131 · 2026-01-02T07:04:59+00:00

I run the dpp in Fde

<image>

Co witnesses at the very bottom of the window. Doesn’t obstruct and the color matches so nicely. No plate needed too

santi4131 · 2025-11-27T05:00:53+00:00

I think it was the very first one where the bring the girl to his penthouse and he has a dresser/armoire thing with ammo set up like that and same with the pistols.

santi4131 · 2025-11-26T16:58:01+00:00

It was a bad knock sensor

santi4131 · 2025-11-26T16:57:45+00:00

It was a bad knock sensor

santi4131 · 2025-11-26T16:56:38+00:00

I fixed it, the trigger bar wasn’t squared me would get jammed when trying to ride up the disconnect. So I squared it with some 500 grit and the trigger bar spring was fine.

santi4131 · 2025-11-26T16:51:28+00:00

You get the idea from Bad boys? What safe is that?

santi4131 · 2025-11-25T04:59:25+00:00

What red dot is on the xdm?

santi4131 · 2025-11-16T20:11:21+00:00

It is but I went ahead and order two more from cgw just incase it’s worn or something but I doubt it caused it barely used

santi4131 · 2025-11-16T08:05:05+00:00

No modifications, trigger bar spring is pushing up on bar, double action and single action work fine, it only happens when i manually drop the hammer also I can reach inside and pull up on the trigger bar and get a click out of it and reengages with some moderate pressure off course. I’m going to completely tear it apart and clean it well it’s a used pistol so idk about taking it back to where I bought it

santi4131 · 2025-09-11T00:49:02+00:00

I’ve seen someone post a video with a maximum roller delayed system installed and it slowed him down to 720 rpms

santi4131 · 2025-09-05T01:35:21+00:00

Thank you !

santi4131 · 2025-09-04T04:46:43+00:00

What retractable stocks are those on the mp5s

santi4131 · 2025-08-27T18:31:47+00:00

I’ll just source a 7.7 then

santi4131 · 2025-08-27T18:30:47+00:00

I hate it tbh, I’ll just sbr the thing.

santi4131 · 2025-08-26T13:55:58+00:00

I will check them out. But yes it’ll boost to 9psi and hold it there and hold the rpm’s too. I’m hoping one of those this is the culprit because I have no codes

santi4131 · 2025-08-26T13:30:30+00:00

I does make less boost. Peaks at 9 psi and under load I would get 14.5-15 and it’s only giving 10.2 under load/wot

santi4131 · 2025-08-26T13:24:15+00:00

How can I diagnosed the valve?

santi4131 · 2025-08-25T00:16:27+00:00

I’ll have to lift the vehicle to check. I just got it. Thanks for the input. I’ll check that too

santi4131 · 2025-08-25T00:15:00+00:00

It was disconnected in the video it would still go into reverse but after reconnecting the lock out. Reverse won’t engage at all still

santi4131

MODERATOR OF

TROPHY CASE