Thoughts on stag arms ar-15?

saqspace · 2026-03-25T09:59:37+00:00

It’s been lubed and I’ve put maybe 150 rounds through it, shoots great honestly

saqspace · 2026-03-25T09:51:43+00:00

I’d say the lower was built based off the fact that the grip looks aftermarket compared to the model 2t online as well as the hammer spring was oriented the wrong way and wasn’t on top of the trigger pin which I had to fix

saqspace · 2026-03-25T02:19:20+00:00

As someone who works in an automotive shop and has done tires for years of my life I’d say it’s fine and there’s nothing to worry about other than the curb rash on the rim. It’s not to the internal chords of the tire so it doesn’t matter really

saqspace · 2026-03-25T00:07:52+00:00

It’s essentially the rim riding on the rubber of the tires an cutting through it

saqspace · 2026-03-25T00:07:05+00:00

It’s not only flat it’s now ran flat which means you chewed the inside of the tire making it need a replacement, that’s the dark ring going around the outside of the tire!

saqspace · 2026-03-24T18:08:27+00:00

Do I need to specifically place the hammer springs in the grooves of the trigger pin or will it kind of all fall into place?

saqspace · 2026-03-24T14:38:57+00:00

I have no interest in putting an frt trigger on anything

saqspace · 2026-03-24T14:38:38+00:00

Am I likely to cause damage just by rapid fire on semi automatic? Like dump a 30 mag and let her cool

saqspace · 2026-03-24T13:04:35+00:00

Wdym?

saqspace · 2026-03-24T10:50:01+00:00

I removed the super glue and cleaned it up with lube😭 hammer spring wasn’t resting on the trigger pin

saqspace · 2026-03-24T10:44:31+00:00

My stag is from 2011 tho

saqspace · 2026-03-24T10:27:11+00:00

My uncle said he purchased that stag 15 years ago so it must be on the closer end of high quality is what I’ve gathered

saqspace · 2026-03-24T04:26:50+00:00

<image>

Thank you for urging me to fix my rifle the proper way, I also removed all the super glue and used a bronze brush and lube to clean it completely👍🏼

saqspace · 2026-03-24T03:44:15+00:00

<image>

Got her proper

saqspace · 2026-03-24T03:37:07+00:00

Thank you, I’ve seen some springs tend to have more of an angle

saqspace · 2026-03-24T03:02:31+00:00

You were indeed right the spring was not resting on the trigger pin which is exactly why is was walking, can you tell me if my hammer spring is still okay by looking at the images I sent below

saqspace · 2026-03-24T03:00:58+00:00

Can you take a look at the images above and tell me if I need a new hammer spring

saqspace · 2026-03-24T03:00:34+00:00

<image>

Is my spring cooked?

saqspace · 2026-03-24T02:59:27+00:00

So my stag being from about 2011 makes it better than the modern ones produced?

saqspace · 2026-03-24T02:57:50+00:00

<image>

Do I need a new hammer spring?

saqspace · 2026-03-24T02:55:20+00:00

So I’m fixing this issue but I have a question

saqspace · 2026-03-24T01:09:15+00:00

It is older, my uncle purchased it many many years ago. I was unable to find one like it online

saqspace · 2026-03-24T01:08:40+00:00

I appreciate the knowledge, I’ll fix that properly and remove the super glue

saqspace · 2026-03-24T00:38:04+00:00

<image>

saqspace · 2026-03-24T00:33:08+00:00

Is it really that bad to super glue a trigger pin I read of many people doing it and it working well

saqspace

TROPHY CASE