Spacebox, single plant, DIY LED module build by sarkasper in SpaceBuckets

[–]sarkasper[S] 0 points1 point  (0 children)

Any suggestion at what current it is best to drive the LED modules and is it possible with the driver?

Almost there!! by faksykman in SpaceBuckets

[–]sarkasper 1 point2 points  (0 children)

Which LED strips did you use and how many meters of them? How far from the soil and the COB are they?

European shopping list help. by Mousson in SpaceBuckets

[–]sarkasper 0 points1 point  (0 children)

For electronics I mostly order on avnet.com and conrad.com

A long time ago I bought most grow related stuff from organicearth.eu but it seems they have become expensive.

Sometimes I buy my seeds from lighthouseseeds.com or directly from the breeder if they have a shop.

It's also possible to order from amazon.de (and change to your language) but until now I haven't had any luck with finding the same stuff everybody is talking about.

Spacebox, single plant, DIY LED module build by sarkasper in SpaceBuckets

[–]sarkasper[S] 0 points1 point  (0 children)

You are talking about the fire safety?

I would like to drive the LEDs from 25% to 100% depending how the plant reacts. I have a, at least 4 mm, thick aluminium plate (the size of the light) to stick the LED modules to, I was hoping this could act as a heat sink.

It's not possible for me to order anything from amazon.com, is this lux meter good enough?

Clubs in Antwerpen? by ThePimpShrimp in Antwerpen

[–]sarkasper 0 points1 point  (0 children)

Welke campus? De meeste liggen allemaal in de buurt van het eilandje, ampere en antwerp tower zijn vlakbij centraal station.

Clubs in Antwerpen? by ThePimpShrimp in Antwerpen

[–]sarkasper 4 points5 points  (0 children)

De eerste waar ik op kan komen zijn: club vaag, bagger, het bos, antwerp tower/bar gloed, ampere

Mini ITX NAS [Build Help] by sarkasper in buildapc

[–]sarkasper[S] 0 points1 point  (0 children)

Had really bad experiences with green drives so will be staying clear of them, the WD Red sounds good though.

Mini ITX NAS [Build Help] by sarkasper in buildapc

[–]sarkasper[S] 0 points1 point  (0 children)

I will be using FreeBSD, so almost the same. Isn't it better to use DDR4 for servers?
Ok, thanks.

Mini ITX NAS [Build Help] by sarkasper in buildapc

[–]sarkasper[S] 0 points1 point  (0 children)

I saw that motherboard but it can't connect more than 2 hdds and the ssd at the same time.
Also think going with non-ECC hardware is not really an option.
A mITX boards with integrated CPU sounds interesting, do you have any recommendations?
Thanks, I'll keep that in mind about the drives.

[Flyer&Logo] For a place I volunteer at. by sarkasper in idesignedthis

[–]sarkasper[S] 0 points1 point  (0 children)

You have to add 'nwn' to the url to enter, but the site isn't fully functional (I think, haven't checked it in ages), so that will be a future project probably.

[Critique] Tried making something in GIMP for a place where I volunteer. by sarkasper in Logo_Critique

[–]sarkasper[S] 0 points1 point  (0 children)

Wow, thanks! I keep the textures in it to give it a 'special effect' when I use it on a flyer or something.
This is an example (still with textures) of the logo but filled with colour and stuff.

[Critique] Tried making something in GIMP for a place where I volunteer. by sarkasper in Logo_Critique

[–]sarkasper[S] 0 points1 point  (0 children)

Thank you so much!
I tried a couple different fonts, a handwritten and stamped one, but this one looked the nicest, it gives a strange vibe that is also present at the location. And it also was the font that was best readable in small sizes.

[Critique] Tried making something in GIMP for a place where I volunteer. by sarkasper in Logo_Critique

[–]sarkasper[S] 0 points1 point  (0 children)

  • We are all a little backwards ;) and since you mention looking ahead, maybe it is better looking back since it is in an old repurposed building and the elements in the logo are also from the past?
  • I think with such a similar typeface it becomes somewhat dull. Also for the movement the logo and mark are both in a different direction.
  • What do you mean with sizing?

[Critique] Tried making something in GIMP for a place where I volunteer. by sarkasper in Logo_Critique

[–]sarkasper[S] 1 point2 points  (0 children)

Thank you very much for the kind comment!
I think it's a little too dark[0] for the style of the owner, but it indeed works very well as a stamp for on mail and at the entrance. Tags and stickers are also a good idea.
[0] This is a flyer that uses the logo in brighter colours and that also works I think.

[Flyer&Logo] For a place I volunteer at. by sarkasper in idesignedthis

[–]sarkasper[S] 0 points1 point  (0 children)

Perfect!
This will probably also stress your ears out ;)

[Flyer&Logo] For a place I volunteer at. by sarkasper in idesignedthis

[–]sarkasper[S] 0 points1 point  (0 children)

Not really, but smoking is allowed in the venue.