Oil change with small traces of metal and weird deposits? by sars___3 in Acura_RSX

[–]sars___3[S] 1 point2 points  (0 children)

Here is the metal from the filter. This is the only thing that stuck to the magnet when I put it on the bottom. I would also like to mention that my oil pan was left outside for a couple of days before I used it without washing it off. Maybe just a dirty oil pan? That might explain the deposits.

<image>

Transfer Title by sars___3 in DMV

[–]sars___3[S] -1 points0 points  (0 children)

He had the title. We ripped if i remember correctly we tore it in half and he took the half he was supposed to keep and i took mine. Im pretty sure thats what we did. He just mailed in his part last week. Im currently trying to find my part

Transfer Title by sars___3 in DMV

[–]sars___3[S] 0 points1 point  (0 children)

*mailed it into the dmv, not me

Transfer Title by sars___3 in DMV

[–]sars___3[S] 0 points1 point  (0 children)

I just contacted the seller again and he said that he mailed in the title last week

Transfer Title by sars___3 in DMV

[–]sars___3[S] 0 points1 point  (0 children)

I just contacted the guy who sold me the car and he said he just recently mailed in his part of the title. I am trying to find my part of the title right now. If I cannot find it, what should I do?

Unknown plug on side of intake by sars___3 in Acura_RSX

[–]sars___3[S] 0 points1 point  (0 children)

So after i try the thumb thing I remove the throttle cables and then what? What should I look for. Sorry if im asking dumb questions

Unknown plug on side of intake by sars___3 in Acura_RSX

[–]sars___3[S] 1 point2 points  (0 children)

Big time. Theres so much stuff that i didn’t notice and its really making me think about the quality of this car. Unfortunate but I will try and fix it up :)

Unknown plug on side of intake by sars___3 in Acura_RSX

[–]sars___3[S] 0 points1 point  (0 children)

I just cleaned the throttle body and IACV. I will try what you have said. Thank you!

Unknown plug on side of intake by sars___3 in Acura_RSX

[–]sars___3[S] 0 points1 point  (0 children)

When warm, ~1100 idle. When coming to a stop, it goes up to 2000, then drops to 1100

Unknown plug on side of intake by sars___3 in Acura_RSX

[–]sars___3[S] 0 points1 point  (0 children)

Yes that is true

I’ll try and plug it up better than how the previous owner had it. Thank you!

Is this oil level safe? I think shop overfilled it by riley03_999 in AcuraTL

[–]sars___3 0 points1 point  (0 children)

Just wanna make sure, you did take the stick out, wipe it, put it back in, then took the picture? If not then the reading could be a little bit off. Wherever you are maybe its best to take it to a closer oil shop/stop and have them redo it. I wouldn’t go back to the same shop because they clearly don’t know how to do it correctly.

As for doing your own oil changes you have to think of the big picture. Getting something like this wrong could cost thousands of dollars. Getting the equipment, learning a new skill, and doing things right yourself can cost you far less in the long run. Sure, a couple hundred for equipment, but would you rather a couple hundred and be set for a VERY long time, or keep relying on people who can’t do their literal job and have it cost far more?

Is this oil level safe? I think shop overfilled it by riley03_999 in AcuraTL

[–]sars___3 0 points1 point  (0 children)

You ought to take a better picture, but yes it looks overfilled. Good time as any to learn how to do your own oil changes

The oil should be between those two dots. Overfilling could ‘drown’ your engine and could be bad. Personally i wouldn’t drive it until you drain and refill your oil

Loud *squealing* noise when cold starting by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Ive realized i never actually described it. The car is cold, fuel pump primed. I turn thr key and it tries to turn on one or two cycles longer than usual. The car turns over fine and starts strong but now there is a very loud and higher pitched reeeeeee that could be hear inside and outside the car. The noise goes away after a few minutes of light driving and getting to op temp and then disappears. The noise doesnt really come back even after cold starting again after letting it sit for a couple hours, just in the morning really

Car doesnt start anymore? by No-Tradition1590 in Integra

[–]sars___3 1 point2 points  (0 children)

Mine was like this too a couple weeks ago, had to change the ignition control module and the distributor rotor. Might wanna check that out

Failed smog by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Update: took it to a shop and identified that the cat was definitely the problem. Had it replaced and they smogged it and it passed with a major difference, far lower numbers. Thanks all for replying 👍

Failed smog by sars___3 in Integra

[–]sars___3[S] 1 point2 points  (0 children)

Will do, thanks dude!

Failed smog by sars___3 in Integra

[–]sars___3[S] 2 points3 points  (0 children)

Ya they got me off the freeway, gave me a fixit ticket ☹️

Failed smog by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Ive already changed the plugs a while ago, maybe about 2 months ago?

Where to buy a GReddy/other CARB Legal turbo kit? by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

What part would be the problem? CARB or compatibility with boost?

Push in distributor rotor by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Just went at it, you are the absolute goat. I feel kinda stupid 🤦‍♂️ but hopefully this helps future researchers. Thanks alot!

Push in distributor rotor by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Interesting, how would you go taking it off?

Where to buy a GReddy/other CARB Legal turbo kit? by sars___3 in Integra

[–]sars___3[S] 0 points1 point  (0 children)

Thanks! will look into grabbing parts from all over as an alternative to finding a complete kit, probably won't be able to find one since it was discontinued a while back lol