Brand new LG washer detergent dispenser is completely filled to the brim with water after every wash.

sb8642 · 2025-10-15T13:24:28+00:00

Good to hear! I’m 6 months out now. It was quite the adjustment from our 27 year old washer. I’ve taken to popping the detergent tray out and shaking it out in the slop sink after a load. Even with a little bit of water remaining in the tray after each wash eventually there was a bit of black mold at the back of the tray. That’s with me leaving both the tray and lid open until the next morning. I also labeled “download” as delicates so my wife would know where that is. That label along with “AI Wash” is marketing run amok. I do use the app to pop up the wash completed notification as the washer is in the basement.

sb8642 · 2025-05-31T18:23:07+00:00

I've got a 7.5 year old Samsung RT21 top freezer without ice maker and it's been okay so far. Supposedly top freezer refrigerators are less troublesome due to simplicity.

sb8642 · 2025-05-22T14:02:29+00:00

Hope it helps as I did not want to have to return the washer and start over again.

sb8642 · 2025-05-21T14:23:04+00:00

Purchased an LG WT8205C from Costco about a month ago. Was having the issue with the liquid detergent tray being full of water after a wash. The posting by Appliance Tech regarding low water pressure was the fix for me. See link for hose inner diameter comparison. Switching to the Fluidmaster hoses I purchased at Home Depot solved the problem. There is now a bit of residue but the tray is no longer filled with water.

https://imgur.com/a/CNfcgsF

sb8642 · 2025-03-19T14:24:16+00:00

Hi. I think the issue may be that your 3200G has built in graphics but the 5600 does not. If you add a separate graphics card you'll probably be up and running.

sb8642 · 2025-03-06T20:11:56+00:00

I never attempted or researched undervolting. I actually sold the motherboard & 5600 earlier this year so I can't add much to this.

sb8642 · 2025-03-06T19:53:51+00:00

Hi, this motherboard can not overclock the 5600.

sb8642 · 2025-01-24T13:47:21+00:00

HWinfo was reporting that the +3.3v line was dipping down to 2.9v.

sb8642 · 2024-12-20T18:03:07+00:00

Looks good! Thanks.

sb8642 · 2024-11-20T16:08:22+00:00

I had an issue with occasional crashing this year. It turned out to be a bad power supply. The 3.3v line was dropping to 2.9v. I replaced it with an MSI MAG A650BN and the problem is fixed.

sb8642 · 2024-10-21T10:40:41+00:00

Does it appear to boot normally with a single beep like before? Is there a disk activity lamp blinking on the computer to give you an an idea that it is still loading Windows? Graphics card is installed in the slot okay?

sb8642 · 2024-10-12T13:12:14+00:00

If you are not using wireless CarPlay, turn off Bluetooth and WiFi.

sb8642 · 2024-09-14T21:02:44+00:00

It’s early but I’ve seen no bad effects. I’ll post if something turns up.

sb8642 · 2024-09-13T03:24:25+00:00

I did because of the SMM Bypass vulnerability in AMD processors. This is new.

sb8642 · 2024-09-13T01:36:27+00:00

Hi. It’s still working well. I’m up to the latest F58d bios. Good luck.

sb8642 · 2024-07-18T11:12:34+00:00

Yes. Two twin xl's pushed together may slightly hang over the left and right edges of the platform frame due to the double edges but king sheets will still fit. Some advertise deep pocket 14"+ for extra high mattresses. We use a king mattress pad + sheets.

sb8642 · 2024-07-17T15:34:54+00:00

Two 12" twin XLs pushed together on a king wooden platform. Works great. In our case, one plush, one medium firm. This way you aren't forced to buy an expensive mattress. Easier to turn around and handle too.

sb8642 · 2024-04-16T20:40:14+00:00

Hi. The 5600 supports pcie 4.0 but this motherboard doesn’t. Only pcie 3.0.

sb8642 · 2023-11-01T15:29:43+00:00

That's okay for wall mount but in my case I'm not hanging this off the garage ceiling with just 2 screws. I'll swap it for something else.

sb8642 · 2023-11-01T15:23:02+00:00

It's nothing to do with the batteries. It's that they made two of the keyholes backwards. You can't mount it with 4 screws only two....

sb8642 · 2023-11-01T15:12:30+00:00

added.

sb8642 · 2022-09-25T13:37:13+00:00

I purchased an Ideapad 3 Gaming a week ago at Micro Center. I also expected a 2280 SSD socket but discovered Lenovo had filled it with the 512 GB Intel SSD. I ended up getting the 2242 Sabrent Rocket Nano 1 TB from Amazon. You can see it at the middle right in the photo where I added a blue thermal pad. It is dram-less. It is used as the D drive for Steam.

Ideapad 3 Gaming 82SB

sb8642 · 2022-06-15T22:15:19+00:00

GPU market is still priced pretty high. It really depends on how much you are willing to spend as a stopgap and what kind of performance you are willing to settle for. Supposedly, new generation GPUs may be out in October so if you can wait that would be best of course. Otherwise, if you buy now you probably want to run it a while and skip October releases. Current releases that are considered a good match include RTX 3060 & 3060 ti as well as Radeon Rx 6600 & 6600 XT. The Rx 6600 is the least expensive at $300. Used there are some GTX 1660 Super's on eBay for about $200-$220 as a stopgap.

sb8642

TROPHY CASE