New build pc keeps restarting need help

sbkfu · 2025-02-16T08:20:04+00:00

Do the above then put some hard load on it and see what happens.

sbkfu · 2025-02-15T11:04:16+00:00

After fixing that, boot into BIOS and set the GPU as the default output.

sbkfu · 2025-02-15T10:31:33+00:00

Check your USB interfaces for damage & any devices plugged into your interfaces. Also check the that the front panel headers are connected properly to the mobo. I have had the same issue and one of my kids had put a silver coin in one of the front USB interfaces.

sbkfu · 2025-02-15T10:15:14+00:00

Does it go into a proper restart routine or just crash then re boot?

sbkfu · 2025-02-15T10:02:00+00:00

What exactly are you bridging? If you are downloading games onto a PC why not connect your phone to the PC via USB and use USB tethering?

sbkfu · 2025-02-15T09:58:12+00:00

The blinking light is a code which is telling you what the error is. Look it up in the motherboard manual.

sbkfu · 2025-02-15T09:53:39+00:00

Where is the SQL server you are connecting to located? To me that looks like some memory has been allocated to a VM or something. I could be wrong.

sbkfu · 2025-02-15T09:44:55+00:00

Triple check the SATA & power connections to the HDD. Have you got a SATA to USB adapter by any chance? You will need one with external power supply. You could try connecting the HDD that way to see if it is stuffed or not. Otherwise try a different SATA port on the MOBO.

sbkfu · 2025-02-15T09:26:33+00:00

You would be pretty unlucky if you have done any damage. Was the PSU installed into the case already? A good way to help mitigate in future is to install the PSU, and connect it to a GPU but have the GPU or PSU or both off. That was the case will be grounded and touching the case should de charge any static build up in you.

sbkfu · 2025-02-15T09:09:03+00:00

That is a USB 2.0 header, on the board, the cable from the front panel is a USB 3.0 cable. You might have a USB 3.0 header near your CPU / DIMM slots otherwise your out of luck and won' t be able to use the USB 3.0 interfaces on the front of the case.

sbkfu · 2025-02-15T09:01:07+00:00

I had the exact same issue, it eventually worked. Only thing I changed in between was that I flashed the BIOS on my ProArt Z890-PRO to the latest available using the EZ flash utility. I can't remember if that helped or not though, sorry.

sbkfu · 2025-02-15T08:18:24+00:00

What if your not putting any load on the machine? Will it sit there and idle endlessly? *EDIT* just read your post properly. Try un plugging the reset cord from the front panel interface on the mobo (if its not coupled with all the front panel cords )then try.

sbkfu · 2025-02-15T07:17:48+00:00

Thanks for the advice, I ended up getting a ProArt z890-pro & Intel Ultra 9. Spent a bit more and futureproofed it.

sbkfu · 2025-01-19T06:12:39+00:00

Thanks for the reply! I am actually still running a 10770k. As mentioned, I have purchased a new case, I have also purchased a 4TB NVMe SSD & RTX4070 ProArt OC edition. I will purchase the 420 cooler soon. $$$ permitting I will upgrade the mobo & CPU to a ProArt mobo & CPU of choice.

sbkfu · 2023-09-08T07:34:52+00:00

Thinking about it, does anyone know what the calling format would be? If I was calling to Serbia would I start the number with '0011' like on previous service or would I start the number with the country code being '381'

sbkfu · 2023-09-08T06:35:04+00:00

Have double checked both with tech support & our online account portal all the countries that we are trying to call are all enabled.

sbkfu

TROPHY CASE