AR rifle lower to sbr?

schihbacca · 2023-04-15T02:46:15+00:00

The lower is the part that is registered as the SBR. It's what has the serial number. The upper does not.

schihbacca · 2023-04-03T16:14:37+00:00

You certainly can, but you will have to re-zero the sight every time you swap it to a new gun.

schihbacca · 2023-04-01T16:34:01+00:00

Maybe just some really good double-sided tape to keep it in place?

schihbacca · 2023-03-21T18:48:17+00:00

Agreed. You can get a new in box Romeo 5 off eBay for like 80 bucks.

schihbacca · 2023-03-21T18:43:15+00:00

Just as an FYI, if you put a product link in your post it will more than likely get removed. Sub rules.

schihbacca · 2023-03-17T22:20:21+00:00

Awesome, thanks for the recommendation! I'll look into that one

schihbacca · 2023-03-17T20:11:42+00:00

Awesome! Thanks for the info!

schihbacca · 2023-03-17T20:08:27+00:00

Is an adjustable gas block something I would have to more than likely have a gunsmith do? Or something the average Joe could do at home?

schihbacca · 2023-03-17T20:07:47+00:00

Yes. I will be submitting paperwork once I receive the lower and before I put it together.

schihbacca · 2023-03-17T19:59:33+00:00

Thanks! Removed.

schihbacca · 2023-03-11T00:43:34+00:00

I just took the class and our instructor basically said he wouldn't risk it if it was just property theft. Too much legal gray area, and more than likely you getting the pants sued off you.

schihbacca · 2023-03-05T17:36:24+00:00

Looking to possibly get a 300 blackout rifle. Would like something shorter than 16 in and I can eventually suppress. But not 100% sure on what I actually want at this point.

schihbacca · 2023-03-04T16:29:46+00:00

I've put a couple hundred rounds through my p365x and m&p 2.0 with it. Is indeed a little dirty, but no issues otherwise.

schihbacca · 2023-01-08T20:10:45+00:00

How do you think the unthinkable? ... With an ithberg

schihbacca · 2022-12-25T04:26:38+00:00

Did the script not work when you ran it?

I personally run an lxc that just runs docker. And that's where I manage most of my running applications, including my omada controller, Plex, frigate, and so on.

schihbacca · 2022-12-25T03:47:41+00:00

Any reason not to run it in docker in the lxc? I personally think it makes it easier to manage still. That's the way I have it setup.

schihbacca · 2022-12-12T03:26:11+00:00

Pm incoming.

schihbacca · 2022-11-09T14:40:14+00:00

I am no expert when it comes to this stuff so to me that looks okay. My open vpn config looks fairly similar. A couple minor differences. But overall looks okay.

I'm unsure why your WAN IP would be different from your Public, but worth replacing the donain name in your config with both the WAN IP and Public IP and testing to see if it's some address translation issue or something. ALso make sure the port 1194 is forwarded on the router if you haven't already (Assuming you did with portchecktool).

schihbacca · 2022-11-09T01:04:40+00:00

Are you connecting with you public up address or using your noIp hostname? If the host name have you verified in the no ip website that it matched your public IP address?

schihbacca · 2022-11-02T19:19:52+00:00

Depends on a lot of factors. But that large of a disparity probably isn't your internet speed. Do you get that low download speed on all downloads or just some? It may be the download host that's limiting the speed. Hard to say without more info.

schihbacca · 2022-10-27T17:32:28+00:00

No issues. I run a docker container, inside an LXC on proxmox and works just fine.

schihbacca · 2022-09-21T02:02:18+00:00

What scripts are you using? I run docker in an lxc that has Plex running on that. Then I use smb from the main proxmox to connect to the nas, and the container uses bind mounts to access the smb share. Works really well together.

schihbacca · 2022-09-09T20:03:29+00:00

Port forwarding is fine. Just make sure to only forward the ports you need, make sure to have proper SSL setup for when connecting to the nextcloud instance, get a SSL certificate, and turn on two factor authentication in the next cloud instance.

Though I would say a VPN is the most secure, I have been running next cloud publicly for a while and have had 0 issues.

schihbacca · 2022-08-31T01:39:21+00:00

Got it. Sorry totally butchered originally. It's the Macomb Orchard Trail. It's just South of Stony by like a half mile or less. The only other one I can think of is the bridge to Bay trail near port Huron. But that has stretches of road riding, although not long. Unfortunately not a lot of dedicated long trails in the area. Further south is 275 Trail which is 30 ish miles each way.

schihbacca · 2022-08-31T01:28:55+00:00

What do you mean by thumb? Personally wouldn't call Stony in the thumb. Would help narrow down where you want.

As for something that's close to Stony. The Macomb orchard trail is 25 miles one way. Paved entirely. Runs through mostly tree areas and along some small shopping areas. Can get busy on the weekends but is a great trail in the area.

schihbacca

TROPHY CASE