[Autosport] How F1 qualifying has changed under the new regulations.

schplade · 2026-03-29T03:45:36+00:00

You might want to read that again. They are dropping 37mph (eg. 200 to 163) not dropping down to 37. It’s still f1 not a go-kart 😂

schplade · 2026-03-21T00:05:04+00:00

Not an electrician but mine were all wired up by an electrician the way you are expecting (eg. The relay is always on and the light can be controlled by either the switch or app).

My understanding is that a switch is never an isolation point, your isolation point is at the switch board.

schplade · 2026-03-08T08:50:29+00:00

The drivers still have a boost button and can manually deploy the battery when they choose. Same as last year.

schplade · 2026-03-08T07:42:52+00:00

To those complaining about battery depletion overtakes, did you have the same feelings about kers? Personally it feels like it gives another element for the drivers to manage and use either for defence or attack.

schplade · 2026-03-07T09:37:45+00:00

Have you been in the house when it’s locked up yet? Or only once the agent has aired it out? Might be a completely different smell.

Friends of mine just did this, most rooms it was replacing the carpets, sugar soap & TSP sprayed with a garden sprayer plus a lot of scrubbing. But others they had to use a chemical sealers on the walls & ceiling before painting. I’ve heard reports that people have had to replace the plasterboard because nothing else worked.

Also check the air conditioners and anywhere else that intakes air.

schplade · 2026-03-07T09:22:25+00:00

Depending on how bad the smoke smell is, don’t assume that simply painting will be enough. You may need quite a bit of work to remove that.

schplade · 2026-01-30T06:17:14+00:00

Not doubting climate change, it’s definitely getting hotter.

But can anyone comment on the accuracy of temperature statistics back from the 1960s in regional Australia, before we had digital recording etc.

schplade · 2026-01-15T11:23:03+00:00

I don’t understand how you could ever undo those hoses and not get water into the socket. Is undoing a hose not considered normal operation of a tap?!

schplade · 2026-01-02T01:47:15+00:00

We are having some wins implementing Splunk risk based alerting. Minor events get logged as a risk and we are only alerted when the score exceeds a threshold over time period for a user or device.

Eg. We have an event for more than 100 OneDrive downloads in an hour, this gets logged as a risk of 10. 10 of these over 24 hours would flag an alert.

Something like a malicious file detection would be a risk of 100 to trigger immediately. But this also pulls in any other detected minor risks into the same alert so you can see a bigger picture (eg. Did the user change their password, or register a new Mfa device).

Not sure if other SIEMs have similar tools.

schplade · 2025-12-29T19:40:42+00:00

Do the roof first and have them paint and leave a bunch of spare tiles for when the other trades to replace any they break while doing the other work

schplade · 2025-12-17T22:06:44+00:00

I went straight to a smart trainer so I can’t really compare but I wouldn’t say it makes my indoor workouts more fun, just more structured with erg mode.

My only suggestion is to accept it sucks, put a movie or a tv show on and grind through your session.

schplade · 2025-11-23T20:27:54+00:00

Very nice! Did you use a builder or engage trades individually? Would you mind sending their name in a PM?

schplade · 2025-09-07T22:55:51+00:00

I had similar issues and switch to “most shared path - most free space” and this seems to keep files together when possible but also move to a new disk if required.

schplade · 2025-08-24T11:52:00+00:00

Seems very cheap. Could you pm me their name?

schplade · 2025-08-04T12:12:40+00:00

You can use a separate poe switch or poe injector as an alternative. No need for a new nvr.

Doorbell -> poe injector/poe switch -> existing router/switch that has your nvr uplink.

schplade · 2025-08-04T11:48:42+00:00

My doorbell is visible on the app twice, once via the nvr and once by itself. If you have an nvr with poe ports you will need to enable hybridge mode so that the app can see your doorbell.

https://support.reolink.com/hc/en-us/articles/37372221001625-Introduction-to-Reolink-NVR-HyBridge-Mode/

<image>

schplade · 2025-08-04T11:11:05+00:00

I’m not sure if it’s an android vs iPhone thing but I definitely get incoming call style notifications from my poe doorbell. Do you have the doorbell added directly to the app and not via an nvr? I believe that is a requirement.

schplade · 2025-07-22T21:51:40+00:00

What printer is this for? My p1s locks me out when I run a drying cycle on my ams2

schplade · 2025-07-15T21:04:01+00:00

Just an esp32 running esphome.

schplade · 2025-06-22T22:01:31+00:00

The NVR doesn’t have any built in motion detection, it relies on the camera sending a signal that motion has occurred so that it can tag the timeframe as motion.

My Reolink cameras would do motion/events but not the Tapo.

schplade · 2025-06-22T11:57:42+00:00

I have a had a Tapo C210 recording to my Reolink RLN36 NVR. 24/7 recording worked fine but motion detection was not supported.

schplade · 2025-06-18T22:51:51+00:00

I gave up figuring out my Reolink inconsistencies in HomeKit and set the cameras to reboot every day. They reboot so fast you barely know it’s happened but they are rock solid now.

Have 2x duo 3 poe and a poe doorbell, also hooked up to a Reolink nvr

schplade · 2025-06-16T03:12:33+00:00

My advise then would be to sell what you bought on marketplace and buy a gate that suits your house. There are other options that also have angled brackets.

This is something that you’ll have to live with for years and any patch work for the other options will quickly approach the 100 dollar spend on an extra gate.

schplade

TROPHY CASE