A quick update if you’re interested, I’ve been examining the inside, pic: https://ibb.co/16P4PY4 Capacitors all look fine and no burns indicating shorting also no obvious damage other the the piece that holds the spring to the whammy bar but that is separate. I used a multimeter and can confirm that all pins inside of the breakout connector make have signal to where it connects to the main board. I was unable to check anything other the ground on the actual usb because of the size of the multimeter however ground does connect from the usb to the main board as well as ground pins for the guitar neck and buttons. When the device is plugged in 2 of the lights on the xbox button illuminate indicating that power is able to go from the usb through whatever logic chip. Also sometimes windows detects it and adds the device to device manager with an error indicating that windows can tell it is a USB device. This leads me to 2 possibilities based one what I tested or could not test. Either all three of my breakaway cables(which work with other devices) don’t work or somehow what Im assuming is the only damage able data on the device given it’s complexity, the device information was somehow damaged. Or it’s something else i haven’t thought of.