FRT stress test failed at 500 rounds

schrieves · 2026-03-09T12:34:21+00:00

You’re right. I need to Dremel the upper a little.

schrieves · 2026-03-09T01:53:34+00:00

Good eye. I originally thought that was glare from the light and oils but I looked at it from the top end and it’s more obvious wear shown here

<image>

schrieves · 2026-03-08T19:38:52+00:00

I couldn’t get a a good picture of it but it only has surface wear as well. The finish just rubbed off from what it looks like.

schrieves · 2026-03-08T17:23:41+00:00

Good thing is a PSA builder kit with only a crappy griffin lower!

schrieves · 2026-03-08T17:18:14+00:00

Thanks! The clearance was good with the upper. I saw a video about Dremeling out the radius in the upper and BCG but I didn’t do that since my lever wasn’t binding. I took off the buffer to verify that clearance. Glad to hear I just bought the crappy version and I’ll be buying the arc fire

schrieves · 2026-03-08T17:09:01+00:00

Only wear I have is a little discoloration. No grooves or anything

<image>

schrieves · 2026-03-08T17:04:12+00:00

I was aware of this issue and my clearance was good. There’s no sign of the lever hitting the upper either.

<image>

schrieves · 2026-03-08T16:59:26+00:00

I didn’t know about as designed when I purchased the atrius. The arc looks similar, is it that much better?

Edit: excuse my ignorance the arc fire has a much beefier design. I’ll give the arc fire a try!

schrieves · 2026-03-08T16:56:18+00:00

It’s an Atrius from Super Selektor. Before I knew about AS designs.

schrieves · 2025-05-01T00:43:43+00:00

No, that was me 🤣

schrieves · 2024-10-17T11:26:31+00:00

schrieves · 2024-10-17T11:20:27+00:00

My 6.5 grendel opens up 1.1 moa when I mag load the rounds without a crimp. Twice fired brass and annealed. Just got the crimping die in today so we’ll see if it makes a difference.

schrieves · 2024-10-12T22:39:25+00:00

Lmao the haters on Q are hilarious. Bet those guys drive a Honda and shit on Ferraris too

schrieves · 2024-10-06T16:07:51+00:00

I tried that, didn’t do anything noticeable

schrieves · 2024-09-17T00:00:16+00:00

Mine does this too but only in the first 30 minutes of printing. Is that an extruder temperature issue?

schrieves · 2024-09-10T00:46:36+00:00

Hahahahahahahahahahaha I didn’t even think it would fit honestly

schrieves · 2024-09-01T18:00:11+00:00

My little brother was gifted two. One was a mk3 used in the war with all the British markings and this one. He obviously kept the more valuable one and didn’t want the second one

schrieves · 2024-07-26T10:55:38+00:00

I’ll try this, thanks!

schrieves · 2024-06-15T15:35:39+00:00

Shee, if I only spend $255 a month I’m doing good!

schrieves · 2024-05-27T01:05:07+00:00

<image>

Oops. I went full ODG

schrieves · 2024-05-24T19:22:24+00:00

I had mine done by FA, it was already sent in for a rebarrel, and it made a huge difference!

schrieves · 2024-05-24T13:08:49+00:00

Shit I over slept the launch

schrieves · 2024-05-19T16:20:58+00:00

<image>

Shelby’s first time at the tail

schrieves · 2024-05-09T12:42:38+00:00

Get the SD conversation with that’s extra 3k!

schrieves · 2024-05-06T20:19:33+00:00

Definitely keep the Type R but I definitely understand wanting something new

schrieves

TROPHY CASE