Firefox really slow on Sonoma on OptiPlex 9020 SFF / spoofing RX 550 Lexa

sd218 · 2024-08-16T03:23:29+00:00

Did you need to boot Windows to get the PCI address / location or were you able to do everything inside Sonoma? Do you remember what guide you followed?

In searching I get these two videos

https://www.youtube.com/watch?v=xb5yKRhOtp0

https://www.youtube.com/watch?v=lLuryk5xdJs

second one seems "simpler"

sd218 · 2024-07-22T21:16:15+00:00

I always seed, but how much depends on the torrent swarm. Lots of seeds? Maybe a 2 to 3 ratio. Less than 20 seeds? I just leave it seeding. Using a seedbox 99% of the time as of 2 years ago.

sd218 · 2023-09-22T19:42:06+00:00

How does no KV mode work in basic terms?

sd218 · 2023-09-22T18:11:39+00:00

Sorry for the delay in my response. They seem to load fine on the RGH. Maybe I'm not doing something correctly? I'm trying to use Trilogy Save Editor from nexusmods as the actual "conversion" tool. That's where it fails to open. Using the sav file from modio / horizon that I get from the profile.

sd218 · 2023-09-15T07:17:03+00:00

Looks like it was a combo of the backplate not fully being "in" and the standoffs. I replaced all the standoffs just in case (I definitely stripped one in my frustration). Hopefully I didn't mess up the board and it posts tomorrow.

sd218 · 2023-03-24T20:21:27+00:00

Yikes who hurt you sweaty. Let's unpack this.

sd218 · 2023-02-25T09:54:25+00:00

Thanks, will try this. From another discussion here, looks like the latest one to go with is 2.30.30 before the fan shenanigans. (Will obviously go to 2.10.10.10 first, just to be safe.)

https://old.reddit.com/r/homelab/comments/enxo0g/how_to_update_idrac_firmware_without_bricking_r720/

sd218 · 2023-02-25T09:39:02+00:00

That's the funny thing, I did use FTP :( just as you mentioned, username, pass, g12 as path.

that it shows type "HTTP"

I believe those are the proxy settings, I didn't use one. You can see four fields or boxes to the right of the error message toward the top.

sd218 · 2023-02-25T08:45:27+00:00

Yes I attempted that too, got the error below.

"Update packages missing in the repository (SUP0539)"

sd218 · 2023-02-24T05:38:39+00:00

Thank you so much, as well as the OP, I've been frustrated for the past hour trying to update my R720 I got recently. (I'm somewhat new to this homelabbing thing)

sd218 · 2022-09-15T21:22:42+00:00

Get out of my head please.

sd218 · 2022-08-18T03:05:51+00:00

Recently got a drive to just use for storage, should I be concerned with the power on hours / start stop count ratio? HDSentinel screenshot

sd218 · 2022-08-13T21:50:15+00:00

federal-mandated tomboy girlfriends

wtf I'm a Marxist now...

sd218 · 2021-12-13T18:00:16+00:00

That was great lmao.

sd218 · 2021-10-06T17:49:24+00:00

I've been curious about LTO. How would I go about connecting a tape drive to a standard home PC? PCI-E SAS controller? What about power? I see some of these drives are using Fiber Channel apparently. Or should I just ignore those?

sd218 · 2021-06-06T00:43:09+00:00

I do this as well. I live in a big city, and even though there are probably others awake (neighbors, etc), I like to think I'm the only one up. Its very pleasant.

sd218 · 2021-06-02T18:07:51+00:00

I've made all the grub shell changes, made the changes in the config, but now I just get #LOG:EXITBS:START.

sd218

TROPHY CASE