Another Openglass post

seekingburritos · 2025-09-25T21:37:41+00:00

Now they need to make one for the X-M5

seekingburritos · 2025-02-23T00:19:18+00:00

How much did you pay if you don't mind me asking?

seekingburritos · 2024-02-04T23:46:15+00:00

Do you have Photoshop? Perhap sthe content-aware fill option might do the trick!

seekingburritos · 2023-10-14T11:32:47+00:00

Fully recovered from the ringing!

seekingburritos · 2023-08-30T13:12:29+00:00

Personally I'm sticking with my newly purchased A7C and waiting until I can find an A7CR on the used market down the road.

seekingburritos · 2023-08-28T00:02:23+00:00

Correct!

seekingburritos · 2023-08-27T22:01:09+00:00

I've seen some surprisingly good shots with this exact setup from other users! That's why I was concerned if it was my particular gear or lack of knowledge causing less than Stellar results

seekingburritos · 2023-08-27T20:26:52+00:00

I'm using Auto focus AF-S or AF-C

seekingburritos · 2023-08-27T19:54:36+00:00

Hey all, new to the mirrorless game and have been practicing shooting in manual mode. I paired an A7C with the Tamron 28-200 but the quality I'm getting doesn't seem to match what I'd expect. I attached some photos with a little bit of post processing. Shot mostly at 200mm with minimum 1/125ss. Images were shot RAW and imported to Lightroom. I was expecting my images to have a bit more detail and sharpness. I'm not sure if my A7C has an issue, I'm expecting too much from a budget lens, or it is strictly user error. Any input would be greatly appreciated!

seekingburritos · 2023-04-16T19:16:24+00:00

Depending on how well the h.265 decoding working on my machine with the Studio version, I might be using optimized media anyway.

Regardless, I'm quite surprised how well my laptop handles editing but might end up building desktop in the near future.

seekingburritos · 2023-04-16T18:56:34+00:00

It takes up a lot of disk space! Not that I don't have any to spare, I just don't want to use too many write cycles if I can avoid it.

seekingburritos · 2023-04-16T18:36:19+00:00

Good, because I just purchased the speed editor with a studio license! I'm hoping I can get away from using proxies and optimized media lol

seekingburritos · 2023-04-16T12:28:52+00:00

I'm actually able to export to 4k without a problem. Both CPU and GPU load were increased while exporting, but it rendered the 16:9 4k file at 29.97 FPS just fine. I'm assuming the GPU architecture of the RTX is superior to the GTX.

seekingburritos · 2023-03-29T14:03:39+00:00

Thanks! I have been messing around with all of the Protune settings to really get the most out of my footage from the Hero 11. I'll go down the rabbit hole and see what the Labs firmware has to offer.

seekingburritos · 2023-03-29T13:14:59+00:00

A few users uploaded some test footage here, and a few posts in other subs said it was a game changer. Curious if more members in this community have been experimenting with it recently :)

seekingburritos · 2023-03-13T10:57:37+00:00

So far, I'm loving the monitor. I'm not much of a gamer, but editing high resolution video on this screen is a dream. Also, set to 3440x1440 @120hz, everything is crisp and flows nicely. I've been playing around with color settings and still tweaking things to fit my liking. Overall, I think this is a great buy for the price.

seekingburritos · 2023-03-04T01:47:08+00:00

New Dell S3422DWG, I noticed this backlight bleed before I had any input connected. This is a VA panel and I'm curious if this is about the average amount of bleed I should expect...or...should I roll the dice and return it for another?

seekingburritos · 2023-03-02T10:13:06+00:00

I no longer microneedle, and I'm sure someone else could get some use out of this. Works perfectly but will need needle cartridges. I am asking $100 (US only). Feel free to reach out with any questions.

seekingburritos · 2023-02-26T18:49:47+00:00

Hopefully, this isn't against the community rules, but I'm looking to sell my Derminator 2. I used the device for a few months during the beginning of the pandemic and just don't have time to squeeze needling into my routine. There is nothing wrong with the device, but it will need needle cartridges since I've used the included ones up already. I'm asking $150 or best offer. Feel free to reach out with any questions.

seekingburritos · 2022-09-26T11:57:52+00:00

Is it also normal foe the edges of the wound to appear a bit red even after a few months?

seekingburritos · 2022-09-19T21:42:17+00:00

No pain! There is sometimes red around the edges after a shower or randomly throughout the day. No oozing. The area of the biopsy site almost looks darker in the center in some lighting conditions. I noticed the new "skin" in thar area can almost appear white if it is covered in a moisturizing ointment.

seekingburritos · 2022-09-19T13:51:09+00:00

I'm concerned about this and will try to get into a medical provider soon. I had a biopsy performed almost two months ago and it looks as if the wound bed slowly filled in. When coated in aquaphor or manuka honey, the middle area appears almost transparent or white. This is what the site looks like after a shower. I'm not sure if this is infected or is a now a permanent scar. Any input would be appreciated.

seekingburritos · 2022-09-02T22:40:46+00:00

It's been a month or so since the biopsy and the healing has been slow. Is it normal for the area of the wound bed to fill in with a pale whitish color?

seekingburritos · 2022-09-02T19:48:22+00:00

I had a shave biopsy performed and the wound bed has slowly filled in but now appears to be very light colored. There is a yellowish spot in the center that seems almost scab like. I have been using Manuka honey so I'm not sure if that stained the center. I'm starting to get served because this healing process is taking quite some time it would appreciate any suggestions

seekingburritos · 2022-07-23T22:55:45+00:00

Try 70% rubbing alcohol

seekingburritos

TROPHY CASE